Theory and characteristics of novel variable reluctance 1X resolver

Although brushless resolvers have been used widely as angular position transducers, they are expensive due to their intricate construction, involving a rotary transformer to supply the exciting coils wound on the rotor poles with the current. It is shown theoretically in this paper that the resolver without rotary transformer or brushes can be realized by simple construction, which consists of the stator core with both 4-poles exciting windings and 2-poles output ones and the rotor core carrying no windings. In this resolver the rotor core has minimum gap at one side and a maximum gap at another side of the diameter. It is characterized by an outer surface form that makes the fluctuation part of gap permeance very in proportion to cos θ, where θ represents the angular position of a point in the air gap with respect to the origin on the rotor, the point of minimum air gap. The method determining the rotor form to embody the aforementioned gap permeance variation is also shown. It has been confirmed not only by simulation but also experiment that the 2-phase output voltages of a model designed based on the theory have sinusoidal waveforms with very small harmonic contents. Moreover, the rotor position detected by processing the output voltages through the conventional resolver/digital converter was within acceptable engineering accuracy.     

提高大口径金属主镜面形精度的方法

分析了影响Ｒｉｔｃｈｅｙ－Ｃｈｒｅｉｔｉｅｎ光学系统中金属主反射镜面形精度因素，采用有限元法对立交易的加工过程及其安装进行了模拟，指出提高主镜的面形镜度，既要合理主镜材料的热处理工艺，也要对加工参数进行控制。良好的稳定化处理可以有效地消除材料内部的残余应力，保证主镜尺寸的稳定性。提高加工基准的精度，并采用组合加工镜面，可以大大提高主镜的面形精度，最后，给出了主镜的干涉仪检测结果。     

Recrystallization in Model Ice Cream Solutions as Affected by Stabilizer Concentration

Ice recrystallization rates in simple aqueous solutions comprising fructose and a hydrocolloid stabilizer were measured. The stabilizers were an enzyme-modified guar and a non-gelling high methoxy pectin. The stabilizer concentration dependence of the recrystallization rates for both materials was similar in that increasing the concentration resulted in decreasing rates until a point is reached where further addition had no additional effect. That recrystallization rates were reduced by both gelling and non-gelling stabilizers was strongly suggestive that gelation was not a requirement for recrystallization inhibition and another more specific mechanism applies, for example a weak interfacial effect such as adsorption or blocking. This behavior was also seen with locust bean gum and guar and provided further empirical evidence to support the hypothesis that stabilizers adsorb to ice crystal surfaces.     

时效处理对 TiNi 合金相变与性能的影响

通过用ＴＥＭ等方法研究热处理制度（固溶处理、时效处理）对ＴｉＮｉ合金相变组织和性能的影响，找出了最佳热处理制度。结果表明，在４５０～５００℃进行时效处理，Ｔｉ－５０．８ａｔ％Ｎｉ的合金出现了大量的Ｔｉ３Ｎｉ４相，且恢复率最高。     

裂纹梁动态响应有限元分析中的线弹簧模型

本文提出了一种以线弹簧模型为基础来分析裂纹梁动态响应的新数值方法．应用能量原理和断裂力学理论首次建立了线弹簧模型的刚度矩阵，从而确立了一种能使二维裂纹问题转化为一维分析的梁的有限元模型．使用这个模型，研究了不同裂纹长度和裂纹位置对悬臂梁固有频率和振型的影响，并把计算所得到的数值结果与现有的实验数据作了比较．结果表明，当无量纲裂纹长度小于０．６时，两者吻合得非常好；反之，两者之间存在较大的误差．对这种误差产生的原因，本文也作了解释．     

A Study of Surface Deformation during Wire‐Rod Rolling of High Speed Steels using Experimental and Computational Techniques

The evolution of surface defects during shape rolling of high‐speed steel billets is studied using longitudinal surface defects prepared by machining and welding. The reduction of the defects during rolling in a production mill is compared to the total area reduction of the billets. Samples are collected after pass 4, 6, 8, 14, 19 and the final pass, 28, representing the finished 5.5mm wire. By inspecting the cross sections, the rotation of the billets from pass to pass is evaluated. Results from FE simulations on solid billets are compared to the experimental results. Generally, simulations predict less reduction than observed experimentally. In most cases cracks reduce most effectively followed by carbon steel welds and stainless steel welds.     

近终形薄带连铸工艺技术比较

近终形薄带连铸是钢铁工业简化工序，节能降耗，降低成本最具有竞争能力的一项重大新工艺技术，本文报导了世界各先进工业国近年来开展研究的最新成果，分析比较了诸多机型的优缺点，并提出了突破工艺技术的技术关键和建议。     

DB590钢焊接冷裂纹敏感性的研究

超低碳贝氏体钢是具有高强度高韧性的新型钢种，它的合金元素含量少，含碳量又低，具有较好的焊接性能。采用插销试验研究了ＤＢ５９０钢焊接冷裂纹敏感性，同时用扫描电镜分析该钢插销试样的冷裂纹断口形貌。试验表明该钢具有优良的抗冷裂性能。     

针尖轮廓飞象扫描检测方法研究

分析了目前我国几种针尖轮廓检测方法、特点和存在问题。提出了一种针尖飞象自动检验方法，其原理是：被检测的针尖和探测器不动，利用转镜系统扫描针尖，产生针尖各部的时序象（飞象），这些依次出现的象受到探测器检测，即可获得反映针尖轮廓的一串直径信息。文中还对飞象扫描法的误差进行了分析和讨论。     

20keV～17MeV中子能谱测量

基于质子反冲方法，建立了一套宽能区，高效率的中子谱仪系统，分别用三支充不同气压氢和甲烷的球形正经计数管和一个有机闪烁探没器分段测量２０ｋｅＶ～１７ＭｅＶ的中子能谱，为了去除γ射线本底，对两种探测器分别采用了两种不同的脉冲形状别技术，谱仪直接测量的是中子在探测器中产生的反冲质脉冲幅度谱，通过解决矩阵方程的方法得到中子谱，解谱中所用的各个探测器的中子响应矩阵均蒙特－卡洛方法计算得到，谱仪在全能区的中子