电磁搅拌制备ZL12Y铝合金流变半固态浆料的实验及模拟研究

对不同温度及不同搅拌工艺下得到的材料的显微组织的比较，确定了合理的半固态温度和搅拌工艺，即半固态温度为590℃，震荡电流为500A。随后对单个线圈电磁搅拌过程进行建模及电磁场和流速场的耦合模拟得到了电磁场和流速场分布，此结果与电磁搅拌的原理及实验结果相一致。计算出在该温度和工艺下熔体内部的平均流动速度为3．2cm／s，将该结果作为能否得到半固态浆料的判据。     

Modeling dynamic developable meshes by the Hamilton principle

In this paper, a new dynamic developable surface model is proposed. The proposed model represents developable surfaces using triangle meshes. A novel algorithm is proposed to introduce the Hamilton principle into these meshes such that the resulting developable model is dynamic, i.e., it can offer a time-dependent continuous path to deform the model. Applications with examples are presented; these show that the proposed technique can model buckled developable surfaces well, and can offer physically-realistic animations of deformed developable surfaces.     

Pulsating Jet Impingement Heat Transfer Enhancement

This article presents results from a numerical study of pulsating jet impingement heat transfer. The motivation is to seek conditions offering a significant enhancement compared to steady flow impingement drying. The CFD software package FLUENT was used for simulating slot-type pulsating jet impingement flows with confinement. The parameter study included velocity amplitude ratio, mean jet velocity, and pulsation frequency. The distance from nozzle exit to surface was three times the hydraulic diameter of the nozzle. The Reynolds number based on the nozzle hydraulic diameter and jet temperature was 2,460 with a mean jet velocity of 30 m/s, which is the base case of the numerical experiments. Results showed that time-averaged surface heat transfer increased with increasing velocity amplitude for the same mean jet velocity. Large velocity amplitudes helped enhance heat transfer by two mechanisms: high jet velocity during the positive cycle and strong recirculating flows during the negative cycle. For the cases with different mean jet velocities but the same maximum velocity, time-averaged surface heat flux decreased with decreasing mean jet velocity. As for the effects of pulsation frequency, with high-velocity amplitude ratio, time-averaged surface heat fluxes were at the same level regardless of frequency. However, at low-velocity amplitude ratio, high frequency caused stronger recirculating flows resulting in greater heat transfer compared to the cases with a lower frequency.     

一个基于多媒体短信息业务的变形动画生成机制

为了适应MMS(多媒体短信息业务)的发展，提出了一个基于图像扭曲的变形动画生成机制。该机制不仅能够实时地产生效果新奇、富于戏剧性的GIF动画，而且能够根据不同终端的特点实现图像的自适应处理，从而使在无线网络上传输丰富多彩的图像文件变得更为方便。     

Modern Teaching and Training in Metallurgical Engineering

This contribution deals with advanced educational technologies needed to equip customers from higher education institutions, research and industry with efficient tools supporting their work and operating new skills‐training methods. The challenges are reducing the training costs, improving quality and increasing the number of graduates in engineering departments. The concept of a Virtual Lab based on the combination of various teaching methods and tools is presented. Principles of mathematisation in metallurgical education and training are discussed. An example of online course designed in the form of Virtual Lab is demonstrated.     

Linear mixture model applied to Amazonian vegetation classification

Many research projects require accurate delineation of different secondary succession (SS) stages over large regions/subregions of the Amazon basin. However, the complexity of vegetation stand structure, abundant vegetation species, and the smooth transition between different SS stages make vegetation classification difficult when using traditional approaches such as the maximum likelihood classifier (MLC). Most of the time, classification distinguishes only between forest/non-forest. It has been difficult to accurately distinguish stages of SS. In this paper, a linear mixture model (LMM) approach is applied to classify successional and mature forests using Thematic Mapper (TM) imagery in the Rondônia region of the Brazilian Amazon. Three endmembers (i.e., shade, soil, and green vegetation or GV) were identified based on the image itself and a constrained least-squares solution was used to unmix the image. This study indicates that the LMM approach is a promising method for distinguishing successional and mature forests in the Amazon basin using TM data. It improved vegetation classification accuracy over that of the MLC. Initial, intermediate, and advanced successional and mature forests were classified with overall accuracy of 78.2% using a threshold method on the ratio of shade to GV fractions, a 7.4% increase over the MLC. The GV and shade fractions are sensitive to the change of vegetation stand structures and better capture biophysical structure information.     

利用计算机进行油气资源评价和勘探决策

本文着重介绍了构成《现代勘探决策理论系统》的5个主要计算机模块,即:生油岩热演化处理、求任意曲边形面积、数学模拟预测资源量、勘探经济评价分析及决策、辅助处理等模块。该系统曾在塔里木盆地和准噶尔盆地的油气资源评价和勘探决策中发挥了作用,受到了专家和用户的好评。     

基于公共存储器进行数据交换的高速数字图象处理系统

本文介绍了一种基于公共存储器进行数据交换的高速数字图象处理系统．给出了公共存储器的设计，描述了处理器对公共存储器的进程同步控制．     

Delivering Improvement from Truth — the Fragile Link Between Analysis and Effective Change

In the history of operations research in industry there has been an abundance of analyses and recommendations produced in millions of man hours by dedicated OR specialists. And yet the net improvement is significantly lower than expected. There are numerous reasons for this shortfall: incomplete analysis, too much theory, incomplete implementation, unreliable recommendations, or a combination of some of these reasons.
By describing several examples, the major reasons for the fragility of the link between recommendation and implementation will be reviewed. What has to be done today to increase the likelihood of implementing an OR recommendation and thus improve the performance of an industrial entity by using the power of OR tools will then be described.     

NUMERICAL STUDY ON QUASI- STEADY FLOW OF NONNEWTONIAN FLUID IN SUCK-ROD PUMP

This paper presents a numerical method for simulation of the flow and thecalculated results of the quasi-steady axisymmetrical flow field and pressure distribution on valveball with power-law model for Non-Newtonian fluid in suck-rod pump.We believe the methodcan provide a foundation for further research and improvement of the design of suck-rod pump.