地层微电阻率成像测井在中原油田的应用

介绍地层微电阻率测井(FMI)技术以及它在地质构造解释、沉积学解释、裂缝识别、地层分析等方面独特的枝术优势,并详细介绍了FMI在中原油田濮深X井的实际应用,进行了应用效果分析,指出成像测井是未来油田油气勘探开发的重要技术手段。     

A method for quantifying cell size from differential interference contrast images: validation and application to osmotically stressed chondrocytes

An automatic image analysis method was developed to determine the shape and size of spheroidal cells from a time series of differential interference contrast (DIC) images. The program incorporates an edge detection algorithm and dynamic programming for edge linking. To assess the accuracy and working range of the method, results from DIC images of different focal planes and resolutions were compared to confocal images in which the cell membrane was fluorescently labelled. The results indicate that a 1‐µm focal drift from the in‐focus plane can lead to an overestimation of cell volume up to 14.1%, mostly due to shadowing effects of DIC microscopy. DIC images allow for accurate measurements when the focal plane lies in a zone slightly above the centre of a spherical cell. In this range the method performs with 1.9% overall volume error without taking into account the error introduced by the representation of the cell as a sphere. As a test case, the method was applied to quantify volume changes due to acute changes of osmotic stress.     

Dual reaction capacity of hydrogenated nanodiamond

High temperature hydrogen stream treatment of nanodiamond was shown to produce nanodiamond with bifunctional surface. OH- and different CH-groups were shown to be the main functional groups on the surface. In this article we proposed two main strategies for further chemical modification of hydrogenated nanodiamond. OH-groups were shown to react with different types of acylating agents: anhydrides and chloranhydrides. Chlorination of hydrogenated nanodiamond with molecular chlorine and its subsequent treatment with alkyllithium reagents resulted in formation of alkyl-nanodiamonds. Chlorination was shown to reduce the size of nanodiamonds aggregates. We have also applied suspension-state NMR-H1 spectroscopy to study suspensions of alkyl-nanodiamonds for the first time.     

工业配料中的自控

本文介绍了微机在工业配料过程中的应用情况，对上料-计量-下料的全过程即“动态运行-静态计量-动态运行”进行控制．     

折反光学系统最佳红外像面位置的研究

较深入地研究了折反光学系统的红外像面,为确定实际的红外像面提出了一个新方法—计算从可见光边缘无色的弥散圆到红外最佳像面的距离。实践证明,这是确定这类光学系统最佳像面的一个方便、可靠的方法。     

一个用于VHSIC连接线瞬态分析的电路模拟器

本文介绍了一个可对含连接线的电路进行瞬态分析的电路模拟器,该模拟器是在SPICE基础上经修改扩充而成的,连接线的处理采用了文献[1]的方法.文中介绍了方法的基本原理,讨论了数值Laplace反变换时参数的选择与误差的控制.实际VHSIC电路的试算结果表明,该模拟器是相当有效的.     

一种基于双正交重叠变换的嵌入式编码算法研究

双正交变换为基于块的低复杂度变换,而且与传统的离散余弦变换相比,一定程度上减小了变换后图像的块效应,因而被采纳入联合图像专家组织JPEG（Joint Photographic Expert Group）最新制定的静态图像编码标准JPEG XR中。为了能够改善其无法实现码流长度控制的缺陷,文章深入研究了JPEG XR的编码技术,提出了一种针对固定压缩比的编码算法。主要思路是通过对双正交变换后的系数进行嵌入式位平面编码,取代了原先的量化步骤,使得压缩码流长度可以精确控制。     

Research on resolution between multi-component LFM signals in the fractional Fourier domain

When the initial frequencies and chirp rates of multi-component linear frequency modulation (LFM or chirp) signals are close,the signals may not be distinguished in the fractional Fourier domain (FRFD).Consequently,some signals cannot be detected.In this paper,first,the spectral distribution characteristics of a continuous LFM signal in the FRFD are analyzed,and then the spectral distribution characteristics of a LFM signal in the discrete FRFD are analyzed.Second,the critical resolution distance between the peaks of two LFM signals in the FRFD is deduced,and the relationship between the dimensional normalization parameter and the distance between two LFM signals in the FRFD is also deduced.It is discovered that selecting a proper dimensional normalization parameter can increase the distance.Finally,a method to select the parameter is proposed,which can improve the resolution ability of the fractional Fourier transform (FRFT).Its effectiveness is verified by simulation results.     

A robust watermarking algorithm based on QR factorization and DCT using quantization index modulation technique

We propose a robust digital watermarking algorithm for copyright protection.A stable feature is obtained by utilizing QR factorization and discrete cosine transform(DCT) techniques,and a meaningful watermark image is embedded into an image by modifying the stable feature with a quantization index modulation(QIM) method.The combination of QR factorization,DCT,and QIM techniques guarantees the robustness of the algorithm.Furthermore,an embedding location selection method is exploited to select blocks with small modifications as the embedding locations.This can minimize the embedding distortion and greatly improve the imperceptibility of our scheme.Several standard images were tested and the experimental results were compared with those of other published schemes.The results demonstrate that our proposed scheme can achieve not only better imperceptibility,but also stronger robustness against common signal processing operations and lossy compressions,such as filtering,noise addition,scaling,sharpening,rotation,cropping,and JPEG/JPEG2000 compression.