格栅式水泥搅拌桩支护在西涌泵站的应用

简介水泥搅拌桩的支护机理,以西涌泵站为例介绍采用格栅式水泥搅拌桩作支护结构的设计及计算方法,指出该技术能较好地解决软湿粘性土地区枢纽深基础开挖问题.     

Kinetics of TSCD zinc oxide nano-layer growth by modified diffuse-interface model

Deposition of zinc oxide films from aqueous solutions containing complex Zn²⁺ ions on soda-lime substrates were studied by two-stage chemical deposition (TSCD) process. It was shown that the film thickness can be controlled by the number of dipping stages. Nano-layers were produced with less than nine times dipping stages. Greater dipping numbers resulted in film thickness exceeding 100 nm. The growth rate obeyed double-stage zeroth order with respect to the concentration and first order with respect to the temperature. This rate was proportional to the difference between the temperature of the hot water and the substrate. Overall activation energy of 17.20 ± 0.42 kJ mol⁻¹ and frequency factor of 2.81 ± 0.07 μm s⁻¹ was determined for ZnO deposition. These values were attributed to two resistances. One resistance corresponded with film heat transfer mechanism. The other was attributed to species attachment to the solid substrate. A modification to the diffuse-interface kinetic model was devised for explanation of the latter. EDAX (electron dispersive elemental analysis), XRD (X-ray diffraction) and SEM (scanning electron microscopy) were used to characterize the layer formed. These methods showed that the product consisted solely of pure elliptical ZnO grains.     

明、清官式灰背作法

在明、清官式建筑的屋顶作法中，灰背（包括泥背）作法是整个屋顶作法中关键的一环。灰背顶可以满足屋顶防水要求，并能满足屋顶水流方向发生改变时的防水要求，因此灰背作法是解决平台屋顶以及天沟等部位防水问题的主要措施。本文主要介绍传统灰背的一般操作程序；宫廷灰背作法中的几种特殊手法；传统灰背的现行作法，以及提高灰背的质量的材料配比和施工方法。     

有耗介质中电磁波传播的时域有限差分法

在推导有耗介质中Maxwell方程差分格式的基础上,详细讨论了时域有限差分法（FDTD）中主要参数的取值原则。对总场边界条件进行了改进,使入射波的泄漏很小,且不用对总场区的4个角点单独处理。讨论了简便的PML条件,避免了Berenger完全匹配层中场分裂过程。采用文中所介绍的方法,对地下有耗介质的理论模型进行了FDTD正演模拟,模拟结果可以反映地下有耗介质的有用信息,验证了该模拟技术的正确性和可靠性。     

临盘油田分层注水管柱有效率影响因素分析

分层注水管柱有效率低一直是困扰临盘油田开发生产的一大难题。针对这一现状，在分析油藏结构、施工工艺和现场资料的基础上，分析了影响分层注水井管柱有效率的因素，阐述了封隔器、工艺操作、管枉自身及温度等制约分层注水管柱有效率提高的原因，并提出了相应的对策和措施。     

A Study of Surface Deformation during Wire‐Rod Rolling of High Speed Steels using Experimental and Computational Techniques

The evolution of surface defects during shape rolling of high‐speed steel billets is studied using longitudinal surface defects prepared by machining and welding. The reduction of the defects during rolling in a production mill is compared to the total area reduction of the billets. Samples are collected after pass 4, 6, 8, 14, 19 and the final pass, 28, representing the finished 5.5mm wire. By inspecting the cross sections, the rotation of the billets from pass to pass is evaluated. Results from FE simulations on solid billets are compared to the experimental results. Generally, simulations predict less reduction than observed experimentally. In most cases cracks reduce most effectively followed by carbon steel welds and stainless steel welds.     

Antiwear Action of Mineral Lubricants Modified by Conventional and Uncoventional Additives

The authors of this paper investigated the influence of esters of rapeseed oil fatty acids on the lubricating properties of mineral lubricants containing chosen AW/EP additives. Methyl esters, ethylene glycol esters, and glycerol esters as well as some commercial AW/EP packages based on zinc dialkyldithiophosphate, S–P organic compounds, and sulphurized esters of fatty acids were tested. The tribological tests were carried out with the use of a four-ball machine. Antiwear (AW) properties of tested compositions were determined using their limiting load of wear (G_oz(40)). It appears that the AW action of esters of rapeseed oil fatty acids depends on their structure. The best AW action is shown by compositions of mineral oil lubricants containing AW/EP additives and methyl esters of rapeseed oil fatty acids. The SEM/EDS analysis of the scar surface layer indicated that the presence of these esters in lubricants causes a change in the interaction between AW/EP additives and the metal surface. These observations were confirmed by the XPS surface analysis.     

AutoCAD作图技巧浅析

介绍了AutoCAD中作图的原则、步骤以及使用技巧,包括AutoCAD表格制作、在Word文档中插入AutoCAD图形、线宽修改、图形的打印技巧、选择对象的一些技巧、绘制局部放大图的方法等,对大多数AutoCAD的使用者在学习和应用中有很大帮助。     

甲壳素纤维/毛/绒双层织物的设计

通过分析甲壳素纤维各项性能,将其引入山羊绒产品中,对双层织物的设计进行探讨,并经过纺纱和织物试制,提出了设计与生产中应注意的问题,开发出了具有永久抗菌性的表层为羊绒、里层为甲壳素与改性羊毛混纺的系列产品.     

沥青混凝土面层施工的质量控制

从原材料的控制、配合比设计控制、施工阶段控制三方面探讨了热拌沥青混凝土面层的施工,重点对施工阶段的控制进行了详细阐述,以提高行车的安全性、舒适性及路面使用的耐久性等,从而延长路面的使用寿命。