MMA7361L的高精度角度检测平台设计

倾角是许多控制系统中需要测量的一个重要参数。针对倾角测量,设计了一种基于ARM微控制器和加速度传感器的角度测量平台。该平台采用基于ARMCortex—M3内核的STM32F103VE为数据处理的核心,利用高精度加速度传感器MMA7361L为测角传感器,同时配置液晶屏和小型键盘实现了人机交互。该平台具有测量精度高、灵敏度高、价格低的特点,应用前景广阔。     

Citations do not solve problems.

D. T. Cambell and D. W. Fiske (1959) made the now-obvious statement that measures of the same variable made by different methods should agree (converge) and certainly should agree better than measures of different variables made by those several methods. Almost everyone accepted that statement, yet the multitrait–multimethod matrices published today show little or no improvement over the published examples cited in 1959. The article raised the conceptual problem of how a variable and its measurement should be linked and the methodological problem of clarifying the nature of methods and their effects. Given these unresolved problems, it is perhaps not surprising that the question of the appropriate statistical analysis of these matrices has also no consensual answer. Perhaps methods and traits or contents are so thoroughly intertwined that their interaction cannot be adequately analyzed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

FMS的模型参考自适应调度

用运筹学研究生产线调度问题已有几十年的历史,但由此得出的调度策略的实时性很差.1986年自动控制工作者提出了“PMS动态自适应计算机调”一词.令人感到十分新奇.可惜.从未见到任何有关的论文.本文研究FMS的模型参考自适应调度.本文采用我们提出的考虑了有限缓冲器容量的极大代数模型.环境的影响反映于对象参数的摄动,本文采用我们提出的摄动计算方法.调度器的设计采用次梯度法,以求解连续变量和离散变量混合的优化问题,附有数字实例,计算和仿真表明:FMS的模型参考自适应调度是可行的,是值得继续深入研究的。     

基于嵌入式技术的倾角传感器检测系统设计

介绍了加速度传感器MMA7260的工作原理、结构及功能,设计了一个基于ARM的实时嵌入式自动检测系统,使用μC/OS-II操作系统,构造一个具有角度测量、相关数据处理以及与上位机通信等功能的现场角度测量单元,上位机则主要完成系统监控和人机交互等功能。     

两轴稳定平台大俯仰角状态控制技术研究

在对两轴稳定平台一般构型分析的基础上,指出了其在俯仰方向大角度时稳定控制存在的不足,提出了采用三正交陀螺稳定控制方式解决大俯仰角控制问题的方法,最后利用MATLAB进行了数学仿真,结果表明该方法有效提高了系统的稳定精度。     

纯电动汽车太阳能辅助空调控制系统的硬件设计

纯电动汽车车载动力电池是其唯一的动力源且很有限,辅助设备消耗的电能减少了纯电动汽车的续驶里程,尤其是空调,所以开发高效的纯电动汽车空调系统是纯电动汽车能够被市场接受的关键。将纯电动汽车顶盖布满太阳电池,可以使空调系统的制冷能力增强,同时还能增加纯电动汽车的行驶距离。对小型纯电动汽车的太阳能辅助空调系统进行研究,设计出适合该空调的自动控制系统,可为纯电动汽车创造出一个更加舒适的驾驶和乘座环境。     

Motivational bases of the public goods problem.

Compared 2 motivational bases for not contributing to a public good, desire to "free ride" (or greed) and fear of being a "sucker," among 110 Japanese undergraduates. It was hypothesized that these 2 types of motivation would be activated under different situations. When a public good was provided conjunctively, fear would have a strong effect but greed would not; when a public good was disjunctively provided, greed would have a strong effect but fear would not. In addition, it was predicted that the greater mutual trust existing among friends would make them contribute more than strangers would in the conjunctive condition but would make no difference in the disjunctive condition. Three types of production rules, in which a public good was conjunctively, disjunctively, or additively produced on the basis of members' contributions, were experimentally created. Half of the groups in each condition consisted of total strangers, and the other half consisted of friends. The hypotheses were supported when the size of the public good (bonus points) was relatively large. Also, Ss responded similarly in the conjunctive condition and in the additive condition. (25 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Aluminum. II. Derivation of C v0from C p and comparison to C v0 calculated from anharmonic models

The specific heat at constant pressure, C _p, of aluminum measured by Ditmars, Plint, and Shukla has been reduced to the volume V ₀ appropriate for 0 K employing the Murnaghan equation. The C _v0 thus obtained is compared with the theoretical C _v0 calculated in the harmonic and the lowest-order anharmonic approximation from three different pseudopotentials (Harrison, Ashcroft, and Dagens-Rasolt-Taylor) as well as a phenomenological Morse potential. The higher-order ( ⁴) anharmonic contributions are calculated from the same nearest-neighbor Morse potential as in the lowest-order anharmonic theory. The role of the vacancy and the higher-order anharmonic contributions to C _v0 has been examined and we conclude that the ⁴ contributions to C _v0 are much smaller than the vacancy contribution. After removal of the vacancy contribution, the reduced C _v0 is found to be in excellent agreement with the Ashcroft and Harrison pseudopotentials as well as the Morse potential including the ² and ⁴ contributions to C _v0.     

LF软吹时间对硅脱氧弹簧钢氧化物夹杂控制影响

 对于一些采用硅锰脱氧冶炼工艺的特殊钢,为保证钢水洁净度,常会选择较长时间的LF软吹处理,导致过程能耗增加。通过工业试验,借助FEI Explorer 4自动扫描电镜检测,研究不同LF精炼软吹时间对硅脱氧弹簧钢55SiCr铸坯氧化物夹杂成分、数量的影响;并采用夹杂物极值统计法,对比评价不同LF精炼软吹时间对应成品盘条横截面最大夹杂物尺寸控制情况。结果表明,在LF软吹10 min与软吹40 min 两种工艺条件下,铸坯中尺寸大于5 μm的氧化物夹杂成分接近,均在CaO-SiO₂-Al₂O₃相图中假硅灰石、钙长石和钙铝黄长石共晶低熔点区,其中软吹10 min工艺铸坯氧化物夹杂组成落入低熔点区的数量所占比例更大。LF软吹10 min与软吹40 min铸坯中尺寸大于5 μm的氧化物夹杂数量密度分别为11.70个/100 mm2和14.59个/100 mm2,尺寸大于15 μm 的氧化物夹杂数量密度分别为0.53个/100 mm2和1.65个/100 mm2,LF软吹10 min工艺铸坯大尺寸氧化物夹杂数量密度略低于LF软吹40 min工艺。当预测面积为30 000 mm2时,两种LF软吹时间对应成品盘条横截面最大夹杂物尺寸分别为27.1 μm和28.1 μm,盘条最大夹杂物尺寸控制无显著差别。结合硅锰脱氧钢中大尺寸低熔点CaO-SiO₂-Al₂O₃系夹杂物主要源自钢包渣乳化卷入,具有与钢水和氩气泡界面接触角很小、难以通过吹氩上浮去除的特点,建议硅锰脱氧钢LF软吹过程按短时间快节奏进行控制。     

生产线试运行过程工艺分析软件的应用

介绍了生产线试运行过程中，用工艺分析软件解决所遇到的工艺问题，为工艺分析软件开拓了一个新的应用领域。