仪表空气干燥器控制系统的升级改进

利用工厂现有优势资源,自主对故障率逐步升高的仪表空气干燥器控制系统进行升级改进,从而提高重要单元设备运行的可靠性。     

基于激光多普勒测速法的2×106m/s2高冲击校准技术

在高冲击传感器动态性能校准中,实现高量程、宽脉冲激励是目前高冲击校准急需解决的问题。采用速度改变法校准原理,以气炮为激励源,利用激光多普勒测速方法测量砧体运动速度,建立高冲击校准系统。分析碰撞系统的作用原理,提出调整和控制激励脉宽的方法;分析测速误差,提出双光束差动侧向测速方法。实验结果表明:高冲击校准系统校准量程为2×106m/s2,激励脉宽在2×106m/s2时大于100μs,校准冲击灵敏度的扩展不确定度小于5%(k=2)。     

改进BP网络在航材需求预测中的应用

针对航材备件需求预测问题,在对影响航材备件需求量的多个因素进行分析研究的基础上,运用改进BP神经网络算法进行预测的仿真实验。实验结果表明,改进BP神经网络能够对积累的历史数据进行充分的应用,并且有较高的预测准确性。     

压风机恒压供风系统设计

针对某矿压风机往井下输送高压空气时存在输气总管压力波动大且调节困难的问题,设计了一种基于变频调速和闭环负反馈控制的压风机恒压供风系统。该系统通过输气总管上的压力传感器采集实时压力信号,与输入压力信号比较后得到偏差信号,PLC对偏差信号进行分析和处理,并输出相应的变频器调节信号,使变频器改变压风机电动机的电源频率,从而达到调节输气总管压力的目的。实际应用表明,该系统运行稳定、可靠,实现了输气总管高压空气的恒压输送。     

Speed-of-sound measurements in liquid and gaseous air

The speed of sound in air has been measured along isotherms for a standard air mixture (0.7811 N₂+0.2097 O₂+0.0092 Ar) in the gas and liquid phases at pressures to 14 MPa. A cylindrical resonator was used in the vapor and supercritical gas phases, and a time-of-flight system was used for measurements of the liquid phase. Data were obtained for the liquid phase at 90, 100, 110, 120, and 130 K. Data were taken at 110, 120, 130, 135, 140, 150, 200, and 300 K in the vapor and supercritical gas phases. These experimental results were compared to a predictive computer model, namely, AIRPROPS.     

基于活塞形状改变的空气弹簧特性仿真研究

研究汽车装用空气弹簧刚度优化问题,活塞形状对膜式空气弹簧刚度特性的影响较大。为了提高整车的平顺性能,建立空气弹簧简化模型,得到圆台和倒圆台活塞形状下空气弹簧的有效承载半径影响因素。利用ABAQUS软件建立安装圆柱、圆台和倒圆台活塞的空气弹簧有限元模型进行,研究了不同圆台角下圆台活塞空气弹簧的刚度特性。仿真结果表明,在一定范围内,圆台角度越大,空气弹簧刚度也越大,证明与理论分析吻合,并对空气弹簧的设计和匹配具有一定的指导意义。     

基于INS定位和WIFI指纹定位技术的无人机室内定位方法研究

针对无人机室内定位问题,提出了一种基于惯性导航系统（INS）和WIFI指纹定位技术的四旋翼无人机的室内定位方法。该方法首先利用WIFI模块测量的信号接收强度信息,根据WIFI指纹定位原理求出该定位时刻下的无人机位置;同时,利用惯性传感器信息计算出INS定位下的无人机位置,结合两种定位结果得出更为精确的位置。最后,通过实验验证了INS定位和WIFI指纹定位相结合的无人机室内定位方法的有效性,且该方法较两种单独定位方法的定位精度更高。     

深度空气分级条件下配风方式对炉内燃烧特性影响的数值模拟研究

借助数值模拟方法对四角切圆煤粉锅炉进行三维稳态数值模拟,观察其炉内燃烧过程,重点对比了在空气分级下不同配风方式对炉内空气流动和燃烧特性的影响。结果表明:底部配风量较多的正宝塔型、均等、缩腰型配风在炉膛底部形成较高切圆且温度较高,主燃区上部风量较小的正宝塔型和鼓腰型配风速度分布均匀,温度偏差较小,倒宝塔型和鼓腰型配风时出口NOx较其他3种配风方式要小。     

Environmental and climate justice and technological carbon removal

Environmental justice (EJ) and climate justice are becoming central foci of climate policy. Awareness is also growing on the need for some amount of carbon dioxide removal (CDR) to curb warming to 1.5 °C. In this paper we map dimensions of environmental and climate justice that stakeholders and communities will need to consider -- from local to global scales. Mapping issues is a step towards developing frameworks to undertake CDR in an environmentally just way.     

Modified g-C3N4 derived from ionic liquid and urea for promoting visible-light photodegradation of organic pollutants

In this work, modified g-C₃N₄ was fabricated successfully by calcination of ionic liquid (IL) and urea. The addition of IL changed the polymerization mode of urea, induced the self-assembly of urea molecules, modified the morphological structure of the tightly packed g-C₃N₄, and extended the electron conjugation system. When using 1-butyl-3-methylimidazolium chloride ([Bmim]Cl) as a modifier, the heteroatom Cl could be inserted into the g-C₃N₄ to optimize the electronic structure. The results of characterizations indicate that the unique structure of modified g-C₃N₄ has an expanded electron delocalization range, introduces an interlayer charge transmission channel, promotes the charge transmission, reduces the band gap, enhances the absorption of visible light, and inhibits electron-hole recombination. Modified g-C₃N₄ showed excellent photocatalytic performance for the degradation of rhodamine B and tetracycline. Furthermore, the effect of different anions in 1-butyl-3-methylimidazolium salts ([Bmim]Cl, [Bmim]Br, [Bmim][BF₄], and [Bmim][PF₆]) on the structure and function of g-C₃N₄ are discussed.