一种新型智能光纤传感器的研制与应用

光纤传感技术是一种新型的传感技术，目前已受到国内外广泛重视而得到高速发展。光纤液位变送器具有高精度、高可靠性，不受电磁干扰等优点，特别是在防爆要求非常高的油气集输领域，它的无电检测、光信号传输完全消除了不安全的因素，为易燃易爆场所提供了安全可靠的检测仪器。     

320×240 Pixels CMOS Digital Image Sensor with Wide Dynamic Range

A 320×240 CMOS image sensor is demonstrated,which is implemented by a standard 0.6 μm 2P2M CMOS process.For reducing the chip area,each 2×2-pixel block shares a sample/hold circuit,analog-to-digital converter and 1-b memory.The 2×2 pixel pitch has an area of 40 μm×40 μm and the fill factor is about 16%.While operating at a low frame rate,the sensor dissipates a very low power by power-management circuit making pixel-level comparators in an idle state.A digital correlated double sampling,which eliminates fixed pattern noise,improves SNR of the sensor, and multiple sampling operations make the sensor have a wide dynamic range.     

Integrated Smart Sensor Calibration

In many applications electronic sensors are used toimprove performance and reliability of measurement systems. Suchsensors should provide a correct transfer from the physical signalto be measured to the electrical output signal. One importantstep to achieve this, is to calibrate each sensor by applyingdifferent reference input signals and adjusting the sensor transferaccordingly. Besides expensive reference equipment the calibrationprocess takes much time and attention per individual sensor,which means a considerable increase in sensor production costs.By including at the sensor or sensor interface chip a programmablecalibration facility the calibration of such smart sensors caneasily be automated and can be executed for a batch of sensorsat a time, thus minimizing the calibration time and costs. Thispaper presents a calibration method and options for integrationin the smart sensor concept, in hardware as well as in software.An advantage of the proposed method is that it does not needa large matrix of calibration data, which needs to be storedin a look-up table or converted into a correction formula, butinstead it uses a step-by-step approach to correct the sensortransfer at each calibration measurement until the error is sufficientlysmall.     

硝酸处理对MgCr_2O_4-Bi_2O_3陶瓷湿敏元件性能的影响

报道了硝酸老化处理方法对MgCr_2O_4—Bi_2O_3陶瓷湿敏元件的结构和性能的影响。实验结果表明,硝酸老化处理不仅是一种可行的造孔方法,而且对元件的力学和电学性能有重要影响。用浓度适宜的硝酸处理后,会得到性能较好的元件。     

PSD激光直线度测量仪

介绍了采用PSD传感器设计的激光直线度测量的工作原理，以及激光器、光靶和计算机系统的设计。     

替代进口梳棉机测厚传感器集成电路芯片分立元件的电路设计

介绍了替代进口梳棉机测厚传感器集成电路分立元件的电路图，工作原理及特点。一年多的实际运行证明，电路参数达到了设计要求。     

Theoretical Analysis of Critical period in Microbend Fiberoptic Sensor

1IntrodctionThesdV8fltsg6Sofffi1CY0bCfldf山CY0ptlCS6fiS0f8f6lflt6llSltyffiDdU18tlflgsliddCtCCtlflg，simpletechnique，highrellabllltyandlowprice，thereformlcrobendfiberoptlcsensorIswidelyusedtomeasurementofstrain，stressandv比rationetc．Inpractice，thesensltlvltyofsensorIsaveryimportantparameter，andthesensltlvltyofmlcrobendf山eroptlcsensorIsmainlyrelat-6dtofoil0WlflgthY66f8CtofS［‘-：ffilCfob6fldsffiplltlld6：fillffib6yofthlCY0b6fldS6Ct10llSsfldffil-crobendperiod，andmlcrobendperio…     

光纤压力传感器微机控制与数据处理系统

本文介绍的光纤压力传感器微机控制与数据处理系统是以8098单片机为核心,配上适量的外围电路所构成。该系统直接利用8098单片机芯片内的A/D模拟输入通道和脉宽调制(PWM)功能来进行数据采集和输出控制信号。该系统还方便地实现与微型打印机的联接,以便将采集的数据保存。整个系统结构简单,成本低,可靠性高,实时控制和测试功能较强,有良好的工业应用价值。     

具有PDEB LB膜的声表面波湿度传感器

介绍一种新型聚炔离子导体湿敏材料－聚对二炔苯的Ｌａｎｇｍｕｉｒ－Ｂｏｌｄｇｅｔｔ成膜原理与制备，淀积有１０层ＰＤＥＢ ＬＢ膜层的声表面波延迟线型湿度传感器的特性。由于ＬＢ成膜技术拉制的膜可以在分子水平上进行定量控制，保证了膜的均匀性和一致性。     

热敏电缆在拉拔减径工艺过程中的性能变化

在拉拔减径工艺的初始阶段，装填于热敏电缆中的氧化物陶瓷热敏材料粉的体积将发生收缩，随后体积不再发生变化。对于不经过热处理的样品，理论分析和实验结果表明，体积收缩停止后，其每米电阻值不随尺寸变化而改变。由于安装等因素引起的芯线电极的位置偏差不公带来样品电阻较大的变化。对于经过热处理的样品，其电阻值在热处理前后及拉拔减径过程中都有较大的变化（可达几个数量级），变化规律较为紊乱。实验分析发现，热处理后的