Numerical solution of the kinematic dynamo problem for Beltrami flows in a sphere

The article discusses computational aspects of the kinematic problem of magnetic field generation by a Beltrami flow in a sphere. Galerkin's method is applied with a functional basis consisting of Laplace operator eigenfunctions. Dominant eigenvalues of the magnetic induction operator and associated magnetic eigenmodes are obtained numerically for a certain Beltrami flow for magnetic Reynolds numbers up to 100. The eigenvalue problem is solved by a highly optimized iterative procedure, which is quite general and can be applied to numerical treatment of arbitrary linear stability problems.     

Post-Supervised Template Induction for Information Extraction from Lists and Tables in Dynamic Web Sources

Dynamic web sites commonly return information in the form of lists and tables. Although hand crafting an extraction program for a specific template is time-consuming but straightforward, it is desirable to automatically generate template extraction programs from examples of lists and tables in html documents. Supervised approaches have been shown to achieve high accuracy, but they require manual labelling of training examples, which is also time consuming. Fully unsupervised approaches, which extract rows and columns by detecting regularities in the data, cannot provide sufficient accuracy for practical domains. We describe a novel technique, Post-supervised Learning, which exploits unsupervised learning to avoid the need for training examples, while minimally involving the user to achieve high accuracy. We have developed unsupervised algorithms to extract the number of rows and adopted a dynamic programming algorithm for extracting columns. Our method achieves high performance with minimal user input compared to fully supervised techniques.     

超声电机环形定子驻波的扭曲和旋转

超声电机环形定子上的驻波变形和振型旋转的现象在实验中被观察到,行波和类行波出现在单相激励情况下。该文讨论了单相激励行波和类行波的成因,当环形定子具有一个非轴对称结构时,同形退化模态不再存在,代之以两个近频模态,由于结构阻尼对这两个模态贡献不同,使得响应出现相位差,行波出现。类行波实质上不是行波而是驻波的扭曲,只是看起来像行波。     

不锈钢精密薄壁件外表面磁力研磨工艺研究

磁性研磨是一种利用磁场中的磁性磨料,对具有相对运动的工件表面进行光整加工的新技术。选择铝、镍、钴磁粉作为磁性磨料时,对奥氏体不锈钢精密薄壁件外表面具有良好的研磨作用。     

配网侧接入电源对负荷建模的影响

研究了配网侧接入电源对负荷建模的影响。发现当配网侧电源的发电容量逐渐增大时，原有的感应电动机并联恒阻抗、恒电流、恒功率（ZIP）模型的负荷模型将不再能很好地反映该区域的负荷特性，进而提出了一种新的负荷模型结构———异步发电机并联ZIP模型。通过仿真计算，验证了该新负荷模型的有效性，并进一步统一了上述2种负荷模型，称为异步机并联ZIP负荷模型。     

Learning Recursive Bayesian Multinets for Data Clustering by Means of Constructive Induction

This paper introduces and evaluates a new class of knowledge model, the recursive Bayesian multinet (RBMN), which encodes the joint probability distribution of a given database. RBMNs extend Bayesian networks (BNs) as well as partitional clustering systems. Briefly, a RBMN is a decision tree with component BNs at the leaves. A RBMN is learnt using a greedy, heuristic approach akin to that used by many supervised decision tree learners, but where BNs are learnt at leaves using constructive induction. A key idea is to treat expected data as real data. This allows us to complete the database and to take advantage of a closed form for the marginal likelihood of the expected complete data that factorizes into separate marginal likelihoods for each family (a node and its parents). Our approach is evaluated on synthetic and real-world databases.     

利用阵列感应测井资料反演地层径向电导率

采用阵列感应测井仪测得的具有不同径向探测深度的5条电导率曲线完成了井中径向电导率分布反演。径向侵入剖面模型由冲洗带、原状地层和从冲洗带到原状地层的过渡带3部分组成。该侵入剖面模型较传统的仅由冲洗带和原状地层构成的台阶状侵入剖面模型更加接近地层径向侵入剖面的真实情况。与台阶状侵入剖面模型相对应的参数模型包括冲洗带电导率、原状地层电导率和侵入半径3个参数。而与含有过渡带的新侵入剖面模型相对应的参数模型除包括冲洗带电导率、原状地层电导率和过渡带中点半径外，还有一个反映过渡带电导率变化的指数N0根据反演得到的过渡带中点半径和指数N可以求出过渡带起点半径和过渡带终点半径。而且根据反演过程中采用的正演响应函数可以计算出任意径向深度处过渡带的电导率值。数值试验结果说明了该方法的正确性，实际资料处理结果说明了该方法的有效性。     

The principle and fundamental characteristics of brushless three-phase synchronous induction motor with two stators

Brushless three-phase synchronous motor involving a rotating ac exciter on the same shaft as the motor and with the windings linked through a shaft-mounted rectifier is widely used as medium and large capacity machines. However, the motor needs to fit with damping windings for self-starting outside of the field winding in the rotor and needs to equip discharge resistance with complex electronic device to dispose of electromagnetic force induced in the field winding at starting. Therefore, the rotor structure is very complex, and there are disadvantages, especially for the robust and highly reliable motor that is desired. To solve the problem found in traditional motors, the authors proposed a brushless three-phase synchronous induction motor with two stators and one wound rotor. This problem is solved because the proposed motor is of two-stators structure: the rotor winding operates as a secondary winding of induction motor at starting and as the field winding at synchronous operation. The motor can self-start as a wound-rotor induction motor without external secondary resistance. Therefore, discharge resistance is not necessary; the starting equipment is very simple and the rotor structure is robust. It is possible to start with high torque. In this paper, the basic constitution of the proposed motor and the principles of operation are described in detail. The experimental results at starting and pulling into synchronism are shown for confirming the principles of operation and the experimental and numerical results of the starting characteristics. The load ones and the generating ones are shown and then the practical use of the proposed motor is confirmed.     

步进电机细分及其在光电测径系统中的应用

叙述了步进电机的细分技术及其测长原理。作为一种测长手段应用于工件直径测量系统中，为提高步进电机细分测长的精度，系统采用了软件补偿的办法，应用光电定位和ＭＣＳ—５１单片机实施控制，构成一种测量范围在１～１００ｍｍ，精度较高，效费比高的光电测径系统。     

含淀粉聚乙烯膜的时控光降解研究

使用复合光降解剂，得到了可光降解的生物降解膜。对膜的光降解进行了考察，并对影响光降解的因素进行了讨论，结果表明，我们所制得的膜是一种较好的时控光降解膜。