UHMWPE混炼接枝马来酸酐研究

讨论了超高相对分子质量聚乙烯(UHMWPE)混炼接枝马来酸酐(MAH)过程中，单体MAH用量、引发剂DCP用量、交联抑制剂己内酰胺(CAILA)用量、流动改性剂硬脂酸钙(CaSt2)用量及混炼温度、时间等工艺条件对UHMWPE接枝率和凝胶含量的影响。用红外光谱表征了接枝物的存在。并用滴定分析法和重量分析法测定了接枝物UHMWPE～g～MAH的接枝率和凝胶含量。实验表明，MAH用量为5份、DCP为0．15份、CALA为0．1份、CaSt2为1份时。混炼温度175∽180℃。混炼时间14min时，可得到接枝率0．75％、凝胶含量1．48%的UHMWPE接枝物。     

凝胶过滤色谱法研究酶解过程中木聚糖分子结构的变化

采用凝胶过滤色谱法研究了木聚糖在酶解过程中分子量分布的变化。结果表明,木聚糖酶对高分子量组分的木聚糖的降解能力较差,而主要降解分子量介于15000～3000之间组分的木聚糖,使得这部分木聚糖变为分子量更低的木聚糖组分。随着酶解时间的延长,酶解得率上升,酶解产物中低聚木糖含量增多,未被酶解的木聚糖的平均聚合度上升,当酶解时间超过4h时,这种变化趋势缓慢。随着酶解轮次的增加,酶解产物中可溶性木聚糖的含量越来越少,木聚糖被降解的难度越来越大。在实际生产中,用来作为低聚木糖生产的木聚糖其聚合度应在20～100之间,酶解时间以4h为宜,重复利用未水解木聚糖的轮次以2轮为宜。     

Soy protein combined with copper and boron compounds for providing effective wood preservation

Chromated copper arsenate (CCA), an arsenicbased wood preservative, is toxic to human health and the environment. Although CCA is stable in seasoned wood, there are potential dangers during CCA manufacture, lumber treatment, and waste disposal. This research was conducted to study the effectiveness of soy products to replace toxic chromium and arsenic compounds in wood preservative formulations. Three soy product (Arpro 2100, HM 90, and Supro 760) were used as fixative agents in preservative solutions containing anhydrous CuSO₄ and Na₂B₄O₇·10H₂O. The decay resistance of treated wood blocks was measured by a soil-block culture method. Despite the large molecular sizes of copper-protein and copper-boron-protein complexes, southern pine sapwood was treatable with these preservative formulations. Wood samples treated with >6 kg°m⁻³ CuSO₄ and 7.5 kg·m⁻³ soy product, and subsequently leached for 3 d and exposed to the decay fungus Gloeophyllum trabeum (Fr.) Mur., sustained only 0.5% weight loss over 12 wk. Wood samples needed 40 kg·m⁻³ CuSO₄ and 50 kg·m⁻³ soy protein to resist the copper-tolerant decay fungus Postia placenta (Fr.) M. Lars. & Lomb. These results suggest that soy-based wood preservatives can prevent wood products from fungal attack and can replace CCA.     

运动与减肥

通过分析肥胖的病因学、运动减肥原理得出,非药物性的适量运动具有经济、有效、无副作用等优点,有利于各年龄段的人降脂减重,并能抑制体重反弹。     

PE-UHMW挤出中空吹塑设备与工艺的研究

改型设计了改性超高相对分子质量聚乙烯的挤出中空吹塑设备，设计采用了专用的挤出螺杆、机筒、模头和模具，并研究改进了吹塑工艺及生产方法，从而克服了超高相对分子质量聚乙烯的加工难点，得到了合格的吹塑制品。     

一种改进型离散Hopfield学习算法

针对离散Hopfield 神经网络(DHNN) 的权值设计问题, 提出一种改进型学习算法, 并在DHNN动力学分析的基础上设计该学习算法. 利用矩阵分解的方法(MD) 得到正交矩阵, 并采用得到的正交矩阵直接计算DHNN的权值矩阵. 通过该学习算法得到的权值矩阵, 可以很好地存储训练样本的信息, 使测试样本收敛到稳定点. 该学习算法不需要进行分块计算, 减少了计算步骤和计算量, 降低了网络的迭代次数, 从而提高了网络运行速度. 最后, 将该学习算法应用于水质评价, 验证了其有效性和可行性.     

Kinetic and molecular weight control for methyl methacrylate semibatch polymerization. II. Open control

The gel effect will bring a violent increase of conversion for methyl methacrylate (MMA) polymerization in a short time. It will be very dangerous for the reactor, as it causes an increase of molecular weight and broadens the molecular weight distribution. To unify the kinetics, molecular weight, and its distribution, on the basis of the mathematical models for semibatch polymerization of MMA, three controlled objectives that are the heat load distribution index, the change in molecular weight, and molecular weight distribution index are presented. Three materials (monomer, solvent, and chain transfer agent) and their flow rate and feeding mode are analyzed for the open control of kinetics, molecular weight, and its distribution. The optimum flow rate and mode are obtained. The heat load distribution index and molecular weight distribution index are even less than 2.0 and 2.2, respectively. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4399–4405, 2006     

水中溶解性有机物分子量分布测定方法评价

文章介绍了两种测定水中有机物分子量分布的方法 :滤膜过滤法及凝胶液相色谱法 ,并列出了一些研究者用两种方法测定水源水的结果 ,根据两种方法的测定原理、测定步骤及对数据的分析 ,作者认为滤膜法应视作为一种粗略的方法 ,有条件时应尽量采用凝胶色谱法     

FO-CA:一种基于距离差异度组合权重的多属性数据分类方法

为了解决多属性数据分类问题,提出了一种基于模糊优选模型与聚类分析的分类方法(FO-CA)。首先由模糊优选模型得到有序综合指标数据集,其中在权重阶段提出了距离差异度并以此为依据构建了一种组合主客观权重的赋权方法;然后采用聚类分析将有序综合指标数据集聚类为几个簇进而分类;最后选取UCI中的Iris、Wine和Ruspini 3个数据集进行仿真实验。实验结果表明,该分类方法相比模糊优选方法及K-Means算法能获得更好的分类结果,对决策者有一定的参考价值。     

High-performance dispersant of coal–water slurry synthesized from wheat straw alkali lignin

Environmental concerns have stimulated interest in utilizing plant-derived materials in various industrial fields. The main objective of the present study was to synthesize a new type of high-performance lignin series dispersant of coal–water slurry (CWS) from wheat straw alkali lignin (WAL), and determine the affecting factors in the reaction and the application performance for CWS preparation. The experimental results showed that the inherent viscosity and the sulfonic group content of the modified wheat straw alkali lignin (MSL) are the key factors affecting its dispersing effect for CWS. In the reaction, the reactant mass concentration and the sulfonating agent amount were changed to obtain the MSL with different inherent viscosities and sulfonic group contents, and the MSL with intermediate inherent viscosity (6.0 ml/g) and higher sulfonic group content (1.80 mmol g^− 1) was found to have excellent dispersing effect for CWS. The MSL obtained from optimized process was used as dispersant for CWS preparation, the studies of the properties of CWS showed that MSL has similar dispersing effect with naphtalenesulfonate–formaldehyde condensate, and far better dispersing effect than lignosulphonate. Recently this kind of new dispersant has been applied in several power plants in China.