热处理对照相明胶溶液粘度和分子量分布的影响

本文以四种照相明胶为研究对象，探讨热处理对照相胶胶溶液粘度和分子量分布的影响，实验结果表明，随着加热温度上升，照相明胶溶液粘度下降，数均分子量下降，照相明胶溶液粘度和数均分子量密切相关，照相明胶溶液粘度下降发生的内在原因是数均分子量下降，在本实验条件下，惰胶、活性胶的加热温度不超过７５℃，ＰＡ胶的加热温度不超过６０℃。     

Improved methods for evaluating the molar mass distributions of cellulose in kraft pulp

Multi‐angle laser light scattering (MALLS) was used to characterize birch kraft pulps with respect to their absolute molecular mass distributions (MMDs). The pulps were dissolved in lithium chloride/N,N‐dimethylacetamide and separated by size exclusion chromatography (SEC). The weight‐average and number‐average molecular masses of the cellulose fractions of the pulps obtained from the absolute MALLS measurements were compared with the molar masses obtained by direct‐standard‐calibration relative pullulan standards. Discrepancies between the two detection methods were found, and two ways of correlating the relative pullulan molar masses to the absolute molar masses were examined. In the first method, the correlation was made over a large range of molecular masses. The second method correlated the molecular masses of the standards to the molecular masses of samples by the calculation of fictitious, cellulose‐equivalent molar masses of the standards. With the preferred second method, a more correct MMD of kraft pulp samples could, therefore, be obtained from an SEC system calibrated with narrow standards. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1170–1179, 2003     

容器设计中搅拌装置的轴向力分析

搅拌装置在化工厂中应用很广，在磷肥、钛白粉装置中（15kt/a)使用较多，仅钛白粉装置中就大约有40－50台，如增稠结晶器，中和槽等，搅拌操作所涉及的因素极为复杂，浆叶形式的选择，从力学的观点来说，迄今研究不够，本文就搅拌装置产生的轴向力问题进行了初步研究。     

国产SEBS流变性能评价

通过对国产SEBS(氢化苯乙烯-丁二烯-苯乙烯嵌段共聚物)流变性能进行测试．分析不同结构、不同嵌段的S／B质量比值、不同相对分子质量、不同加工温度对SEBS产品流变性能的影响．促进用户对国产SEBS性能的了解。     

On the thermal stability of xanthan gum

The thermal stability of xanthan gum in dilute aqueous solutions at 90°C is considered. The relative viscosity as a function of ageing time is discussed, and it has been found to depend on the polymer concentration and conformation as well as on the salt content. The effectiveness of a quencher demonstrates the existence of a free-radical process in the degradation. During ageing, the molecular weight first decreases by rapid random hydrolysis of the main chain and loss of the pyruvate and acetate substituents. Later, oligomers are formed corresponding to a breakdown of both the side chain and the main chain. The identification of cellodextrins in the oligomer pool demonstrates the second effect.     

Effect of time/temperature treatment parameters on depolymerization of chitosan

Depolymerization of the biopolymer chitosan by an autoclaving process at 121°C and 15 psi was investigated using various treatments. Acetic acid was found to be the most effective solvent in decreasing chitosan viscosity among the six organic acids tested. The rate of viscosity decrease increased with increasing chitosan concentration. The viscosity of 1% chitosan in 1% acetic acid decreased rapidly to 91% of the initial viscosity following the initial 15 min of autoclaving. This decreased gradually to 93% and 94% in 30 and 60 min, respectively, without being adversely affected by the chitosan solution volume. The degree of deacetylation was comparable before and after autoclaving for 60 min. Chitosan at three molecular weights (M_r = 1597, 1110, and 789 kDa) decreased in molecular weight by 46%–51% in the 15‐min treatment, 55%–60% in the 30‐min treatment, and 60%–62% in the 60‐min treatment. The addition of 0.1%–1.0% (v/v) concentrations of hydrogen peroxide to the chitosan solution autoclaved for 15 min decreased viscosity by 94%–98% and molecular weight by 69%–83%. This process is a simple, timesaving, homogeneous depolymerization procedure, and it is possible to prepare partially hydrolyzed chitosan with specified molecular weights by regulating the time of treatment. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1890–1894, 2003     

丙烯酰胺与2-丙烯酰胺基-2-甲基丙磺酸反相乳液聚合的研究

采用Span-80为乳化剂，白油为分散介质，（NH4）2S2O8-Na2SO3为引发剂，研究了丙烯酰胺（AM）与2-丙烯酰胺基-2-甲基丙磺酸（AMPS）的反相乳液共聚反应，合成出了高相对分子质量的共聚物。讨论了引发剂用量、乳化剂用量、水油比、单体浓度等因素对共聚物相对分子质量的影响。引发剂用量为单体质量的0．2‰，乳化剂为油相的6．7％，水油比为1：1．5，单体浓度为37．5％时可获得高相对分子质量的共聚物，且聚合反应平稳易控制。     

双峰分子量分布聚乙烯的研究进展

双峰聚乙烯是目前用途很广、市场前景很好的一种通用树脂。国内外双峰分子量分布聚乙烯研究取得了很大进展，重点领域为双峰分子量分布聚乙烯制备工艺和催化剂的研究。双峰聚乙烯具有优异的性能，为进一步开拓市场，我国应着力开展这方面的研究开发生产工作。     

一种权重融合模型的物联网频谱分配方案及其免疫实现

采用认知无线电技术, 设计了一种空闲频谱资源选择排序方法。在进行频谱选择时, 提出了一种无偏好信息的主客观权重融合方法, 提高权重设置的合理性, 并将求解权重转换为一个最优化问题, 通过免疫优化算法进行求解。实验结果表明, 该算法可以有效选择满足物联网节点传输需求的频谱, 并具有较高的网络吞吐量。     

一种基于聚类加权的文本特征生成算法

目前的文本特征生成算法一般采用加权的文本向量空间模型,该模型使用TF-IDF评价函数来计算单个特征的权值,这种算法生成的文本特征冗余度往往都比较高。针对这一问题,采用了一种基于聚类加权的文本特征生成算法,首先对特征候选集进行初始加权处理;然后通过语义和信息熵对特征进行进一步加权处理;最后使用特征聚类对冗余特征进行剔除。实验表明该算法比传统的TF-IDF算法的平均分类准确率高出5%左右。