基于熵权灰色关联和D-S证据理论的威胁评估

为了更好地处理空中威胁目标的不确定性信息,提出了基于熵权灰色关联和D-S证据理论相结合的威胁评估方法.将熵理论应用于求解各指标权重,利用灰色关联法确定各指标的不确信度,进而得到各指标下不同目标的Mass函数,通过D-S证据理论对各Mass函数进行合成,根据置信函数大小对目标进行排序.仿真实验证明该方法是合理有效的.     

Effect of molecular weight and branch content on the creep behavior of oriented polyethylene

Creep studies were carried out on a range of homopolymers and copolymers of polyethylene with well‐defined molecular weight and branch content. The creep data were analyzed in terms of two thermally activated processes acting in parallel and the effects of molecular weight and branch content are discussed. It is shown that increasing either the number‐average molecular weight or the weight‐average molecular weight gives improved creep behavior at all stress levels. The introduction of butyl branches leads to lower creep at low‐stress levels but can give rise to higher creep at high stress. Plots of the equilibrium log₁₀(strain rate) versus stress at fixed draw ratio (strain) can be used to define sections through a unique true stress/true strain/strain rate surface for each material. These creep results have an additional value in terms of the link between slow crack propagation (SCG) in polyethylene and fibril creep, confirming the proposal made elsewhere that SCG can be quantified in terms of creep to failure across the true stress/true strain/strain rate surface. © 2003 Wiley Periodicals, J Appl Polym Sci 89: 1663–1670, 2003     

Detailed Molecular Structure Modeling – A Path Forward to Designing Application Properties of ldPE

Summary: This paper describes a step on the ambitious aim to “design” application properties of ldPE by first simulating the detailed molecular structure of a high‐pressure tubular reactor product. The reactor of a certain configuration produces under well‐defined operating conditions. The next step is to correlate the structure with the application properties. Finally, the sequence will be reversed in order to deduce the operating conditions, which lead to the desired product quality. Two‐dimensional distributions, in molecular weight and branching frequency, as well a two compartment models with a core and a shell stream were simulated and compared with experimental results. Therefore, CFD simulations were carried out to discretize the reaction medium. Samples were taken from both pilot and commercial plants. The TREF‐SEC analytical method was successfully applied in order to measure the microscopic structure of the material. The tremendous numerical problems were solved with the help of the software PREDICI .

Detailed MWD for a pilot scale reactor product.     

Molecular weight distributions and size fractionations of H-coal liquids

This Paper deals with a comparative study on the use of gel permeation chromatography (g.p.c.) and vapour pressure osmometry (v.p.o.) to obtain molecular weight data for the hexane-soluble fractions of three H-coal liquids. The use of two types of column packing materials, polyvinylacetate and styrene-divinylbenzene copolymer gels, is described. A successful, preparative use of the polyvinylacetate gel to fractionate the hexane-soluble fraction of H-coal liquid, atmospheric still overhead (ASO), has been established. Molecular weight data obtained by v.p.o. for the benzene-soluble fraction and the pyridine-soluble fraction of the three H-coal liquids are reported. Solvent extraction has been utilized also to find the amount of oil, asphaltenes and asphaltols in the three H-coal liquids.     

On the molecular weight determination of a poly(aryl-ether-ether-ketone) (PEEK)

Attempts have been made to determine the weight average molecular weight ($\text{M}\text{?}{}_{\mathrm{<mtext>W</mtext>}}$), the radius of gyration ($\text{R}\text{?}{}_{\mathrm{<mtext>G</mtext>}}$) and the second virial coefficient (A₂) of five samples of poly(ether-ether-ketone) (PEEK) by light scattering (LS) in concentrated sulphuric acid. Account has been taken of the sulphonation of the polymer. Correlations between LS-molecular weights, melt viscosities and intrinsic viscosities in sulphuric acid or in a $\text{50}\text{50}$ phenol-trichlorobenzene mixture have been established. Gel permeation chromatography (g.p.c.) analyses at 115°C have been performed in this latter solvent and two calibration methods were compared.     

Obesity: Prevalence,Theories, Medical Consequences,Management, and Research Directions

Obesity and its associated disorders are a growing epidemic across the world. Many genetic, physiological, and behavioral factors play a role in the etiology of obesity. Diet and exercise are known to play a valuable role in the treatment and prevention of obesity and associated disorders such as hypertension, heart disease, and diabetes. Therefore, the purpose of this review is to examine the prevalence, etiology, consequences, and treatment of obesity.     

SE-I型混凝剂在水处理中的应用

利用透射电镜和微孔滤膜超滤法研究了SE -I和PAC混凝剂的结构形貌和相对分子质量分布情况 ;比较了SE -I和PAC混凝处理油田含油废水、煤矿矿井废水和水库水的效果。实验结果表明 ,SE -I较PAC具有更大的枝化度和相对分子质量 ,体现在水处理效果上是SE -I较PAC有更好的除油、除浊、去除COD和脱色效果。SE -I型混凝剂是一种高效水处理剂     

Influence of chitosan characteristics on coagulation and flocculation of organic suspensions

Several samples of chitosan with different degrees of deacetylation and of different molecular weights were tested for the coagulation–flocculation of organic suspensions. Organic suspensions were prepared by mixing mushroom powder with tap water. Experiments were carried out at pH 5, pH 7, and pH 9. Because decreasing the pH reduced the amount of chitosan required to reach the required turbidity, at pH 9, a high concentration of chitosan was required to achieve the required treatment levels, whereas the difference was less significant between pH 7 and pH 5 (the required concentration of chitosan was halved). Though viscosity, correlated to the molecular weight of chitosan, affected treatment performance, its influence on the efficiency of coagulation–flocculation could be substantially reduced by slightly increasing the concentration of the polymer. This is of importance in the processing of industrial effluents: the aging of a chitosan solution, which may cause partial depolymerization, and loss of viscosity, will have a limited impact on process efficiency. The degree of deacetylation also has a limited effect on treatment performance, especially when the degree of deacetylation exceeds 90%. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 2070–2079, 2005     

Surface modification and physical properties of various UHMWPE‐fiber‐reinforced modified epoxy composites

Two surface modification methods—plasma surface treatment and chemical agent treatment—were used to investigate their effects on the surface properties of ultrahigh‐molecular‐weight polyethylene (UHMWPE) fibers. In the analyses, performed using electron spectroscopy for chemical analysis, changes in weight, and scanning electron microscope observations, demonstrated that the two fiber‐surface‐modified composites formed between UHMWPE fiber and epoxy matrix exhibited improved interfacial adhesion and slight improvements in tensile strengths, but notable decreases in elongation, relative to those properties of the composites reinforced with the untreated UHMWPE fibers. In addition, three kinds of epoxy resins—neat DGEBA, polyurethane‐crosslinked DGEBA, and BHHBP‐DGEBA—were used as resin matrices to examine the tensile and elongation properties of their UHMWPE fiber‐reinforced composites. From stress/strain measurements and scanning electron microscope observations, the resin matrix improved the tensile strength apparently, but did not affect the elongation. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 655–665, 2007