A detailed analysis of ambipolar diffusion in nanostructured metal oxide films

In this paper a transport equation is derived which describes the behaviour of the nanostructured metal oxide films in a photoelectrochemical cell. It is shown that a detailed analysis of the charge compensation mechanism necessarily leads to a transport equation with characteristics similar to but logically distinct from the pure diffusion equation. The studied phenomenon was named ambipolar diffusion in the early 1950s. It takes into account the fact that the diffusion processes of ions and electrons occur at different speeds. A weak electric field therefore couples the processes together to preserve charge neutrality. The electric field in turn affects the transport resulting in a deviation from purely diffusive behaviour. However, this has not been widely recognised in the literature for nanostructured semiconductor films until very recently. In this paper a detailed analysis is presented. It is based on the assumption that the current density is solenoidal. It is shown that application of the ambipolar diffusion model to a photoelectrochemical cell based on a nanostructured metal oxide film leads to an additional term in the transport equation, rather than only a new diffusion coefficient as in earlier work. It is also shown that the boundary conditions interact closely with the equation to form a transport model.     

数值地形图的生成及其水文地貌特征评价

数值地形图(DEM)是利用地理信息系统(GIS)进行流域水文模拟的基础, 其精度直接影响模拟结果在没有现成的数值地形图时, 应用人员往往利用传统的地形图来生成它. 本文分别采用Arc/Info地理信息系统软件提供的哈奇逊法和不规则三角网五次插值法, 对一个实验流域的高程取样点进行插值, 生成了4种不同的数值地形图, 从凹洼分布、流域界定、河网提取、地面坡度和地形指数、以及地面径流汇成等方面, 对它们的水文地貌精度进行了比较. 结果表明, 两种方法都能生成由高程点群所反映的地形, 然而由于哈奇逊法能够结合流域的河网结构及其具有物理基础的水文地貌加强法来处理凹洼问题, 因此大大地提高了其所生成的流域数值地形图水文地貌特征精度.     

CASE与MIS的开发

本文介绍ＣＡＳＥ技术的基本思想与构成，ＣＡＳＥ工具在ＭＩＳ开发中的作用，概要介绍国内流行的ＣＡＳＥ产品并对其作出评述。     

采用信息融合技术的IR／MMW复合导引头的目标跟踪

从误差测量环节入手，基于IR／MMW双模结构，采用信息融合处理技术提高其估计跟踪精度，最终达到降低制导误差，提高武器性能的目的，仿真结果验证了该方法的有效性。     

Analysis and visualisation with host-based software – The features of STNAnaVist™

This article is based on experiences with data and text mining to gain information for strategic business decisions, using host-based analysis and visualisation (A/V), primarily in the field of patents. The potential advantages of host-based A/V are pointed out and the features of the first such A/V software, STN^®AnaVist™, are described in detail. Areas covered include the user interfaces, initial set of documents for A/V, data mining, text mining, reporting, and suggestions for further development.     

基于"替换法"的汉字加、解密实现技术

文章讨论的基于“替换法”的汉字信息加、解密实现技术,改变了传统的汉字加密结果,使加密后的密文仍是可以识别和再利用的汉字,发送者可以在任何可编辑汉字的通讯设备上发送和接收密文,确保中文信息传输过程中的安全性。加、解密算法实现的代码语言为VFP6.0。     

铜基催化剂孔隙率对气体有效扩散系数的影响

研究了18种具有不同孔结构参数的粒状铜基甲醇合成催化剂孔隙率对有效扩散系数的影响。结果发现，催化剂微孔孔隙率增大，曲节因子亦增大，扩散阻力增加。将孔隙率与催化剂曲节因子关联，得到了半经验方程，用它可估算催化剂的曲节因子。     

基于协方差矩阵变换的相干源个数估计

正确地估计信号源个数是高分辨阵列信号处理的一个重要组成部分,本文提出了一种相干源个数估计的方法。这种方法是先采用空间平滑技术对信号源去相关,然后对阵列协方差进行酉变换,最后用基于协方差矩阵变换的信息论准则和盖氏半径(Gerschgorin Radii)两种方法估计信号源个数。计算机仿真结果证实了方法的可行性。     

Ubiquitous Information Services with JAIN Platform

To provide responsive information services in a ubiquitous computing environment, service software and system development are indispensable. A component-based ubiquitous information system with a JAIN (Java APIs for Integrated Networks) platform to achieve seamless transmissions and reach-everywhere communications was designed in our research. In this development, numerous ubiquitous service modules were identified: location management, roaming, mobile IP and WAP networking. These component-based network modules were constructed using a component composition language with component specification and interface definition, running on top of a distributed service architecture using a JAIN platform to distribute the ubiquitous information services to mobile users. Two applications, Wireless-Application-Protocol (WAP) Mail and Video-on-Demand (VoD) services, show that the JAIN-like platform with the developed networking components effectively fills the gap for application developers between mobile appliances and various kinds of ubiquitous information services.     

基于B/S模式的汽车零件销存管理信息系统的设计与实现

对于采用连锁经营的汽车零件销售企业来说,各经营网点分布在同一城市的不同区域或不同城市,为了在充分利用原有信息和资源的基础上处理好许多中间环节,减少人员工作量,保证企业销存状态良好,提高管理效率,设计了基于B/S模式的汽车零件销存管理信息系统的技术方案,详细讨论系统的功能设计以及实现技术。