基于CCD的激光微位移测量系统研究

介绍了一种基于多普勒效应的可进行动态微位移测量的激光微位移测量系统。该系统以He-Ne激光器为光源,配以干涉系统移动方向判别及分频系统、CCD视频信号的高速动态采集系统、微机处理系统及干涉图处理软件包等。与传统测量方法相比,其精度、灵敏度及稳定性都有较大提高,并实现了微位移的全自动测量。     

A new ‘Tailor-made’ methodology for the mechanical behaviour analysis of rubber-like materials: II. Application to the hyperelastic behaviour characterization of a carbon-black filled natural rubber vulcanizate

The purpose of this paper is the modelling of the mechanical behaviour of an elastomeric material, through detailed experimental and numerical procedures, specific to large strains. The experimental technique is based on in-plane kinematics measurements using a speckle extensometer, from which the whole two-dimensional field of in-plane displacements is obtained by a digital image processing [Polymer (2002)]. This part of the work concerns the identification of the constitutive equation for a carbon black natural rubber (NR) vulcanizate. We start by quoting some theoretical considerations relative to rubber elasticity and stress-softening effect, which is the counterpart of the filler reinforcement. Then, we describe the experimental procedure and present data for both non-preconditioned and preconditioned samples. Next, the identification of the constitutive law parameters using a minimization algorithm is driven. Finally, we present the validation of the constitutive model, by its implementation into the finite element code SYSTUS and the numerical simulation of the response of a double edge notched tensile (DENT) specimen.     

混凝土骨料二维分布的模拟和应用

通过在一个矩形截面上模拟混凝土骨料的实际分布，获得了该截面上任一点的骨料分布密度和骨料分布的统计特性。模拟结果表明，当模拟次数趋向于无穷大时，截面上任一点的骨料分布密度趋向于定值，对于不同的骨料面积百分数，骨料分布密度曲线的形状十分相似，均由上升段和水平段两部分组成。基于这些模拟结果，利用数学拟合获得了骨料分布密度的解析表达式，并被混凝土实验所初步证实。作为一个应用，本文计算了混凝土截面上各点的氯离子扩散系数。     

一种简单的S参数去嵌入技术

介绍了在低成本夹具上，任意微带结构二端口网络S参数去嵌入的方法；该方法用于获取放大器模块的S参数，根据这些参数设计的C波段的放大器实测结果与仿真一致。     

Alleviation Effect of Lanthanum on Cadmium Stress in Seedling Hydroponic Culture of Kidney Bean and Corn

Since1970s,rare earths(RE)have been exten-sively used as micro-fertilizers for crops in China.Ithas already been proved that REcani mprove the pro-duction and quality of crops.However,there havebeen a fewinvestigations about using RE as regulatorin pollution ecology.For example,An et al[1]studiedthe effects of O3on wheat growth and the protectiveeffect of RE.Yan and Zhou et al[2,3]discussed theprotective effect of RE on plants under acid rainstress.Jia et al[4]and Hu et al[5]reported th…     

爆炸焊接边界效应的力学能量原理

在爆炸焊接工艺中,存在一种称为边界效应的物理现象。即在一般情况下,在爆炸焊接后的复合材料中,会出现雷管区不复、其余周边被打伤、打裂和变形严重等问题。这些问题严重地影响着这类材料的质量。该文从传统的和经典的力学及能量原理出发,探讨了边界效应产生的力学 能量原理,并且提出了预防的措施。     

Schäden durch kerbinduzierte Schwingbrüche

Failures by notch induced fatigue fractures Notches produce local stress concentrations and promote the formation of fatigue cracks. Characteristic types of notches as a result of design, manufacturing and operation are presented and remedial measures are discussed. Examples demonstrate the effect of different kinds of notches on various components.     

炮孔内空气间隙作用的机理探讨

本文探讨了装药结构中空气间隙作用的机理,提出了气体分子的迁移效应与碰撞效应,比较完满地解释了不同空气间隙对爆破效果的影响.     

3-D gust effect factor for slender vertical structures

Original studies on gust factor buffeting dealt with the alongwind displacement of structures. Research on this topic carried out since the nineties followed two distinct lines: the first determines the maximum effects due to the alongwind response; the second extends the original method from the alongwind response to crosswind and torsional responses. This paper represents the junction point of these research lines with reference to cantilever slender vertical structures. It derives the most relevant effects associated with the three-dimensional (3-D) wind-excited response of this structural type and shows that a suitable definition of one non-dimensional quantity, referred to as the 3-D gust effect factor, provides such effects at any level through a wide set of experimental, numerical and analytical procedures. A new definition of a 3-D equivalent static force consistent with this method is also introduced and critically compared with previous analogous statements.     

质子和中子的单粒子效应等效性实验研究

通过实验方法确定了高能质子和中子引起的单粒子效应等效关系，实验中采用金箔散射法降低了质子束流强度，并利用热释光剂量计（TLD）进行质子注量的监测，采用新研制的存储器长线实时监测系统，进行了64K位至4M位的SRAM器件单粒子效应实验，确定了两种粒子引起单粒子效应等效关系。