基于等幅周期荷载下软岩Bingham本构模型的研究

为建立一种描述等幅周期荷载下软岩应变特性的本构模型,将Bingham模型中的常值黏壶元件替换成与循环次数相关的变系数黏壶元件,常值弹性元件替换为随周期荷载循环次数的增大而衰减的非定值弹性元件,即可得到反映周期荷载下软岩各种应变规律的Bingham本构模型。当循环荷载应力上限值σmax大于岩石的临界强度σs时,模型为可反映软岩3个应变阶段的改进4参数Bingam模型;反之则为反映软岩前两个应变阶段的非常值2参数Hook模型。将周期荷载分解为一个定值荷载和一个平均应力值为零的周期荷载,基于流变力学理论给出了定值荷载作用下基于该模型的本构方程式,再根据黏弹性力学理论,给出了平均应力值为零的周期荷载下基于该模型的本构方程式,最后将已获得的本构方程式叠加即得到周期荷载下软岩本构方程式。结果表明:所建立的本构方程式可较好描述周期荷载下不同软岩各类应变特征,对各类软岩的应变曲线拟合的相关系数均在0.868以上,且同一种岩石模型中弹性元件系数初始值随周期荷载的动应力幅值的增大而减小,岩石加速应变速率参数随动应力幅值的增大而增大。     

Entanglement Loss in Fast-Flowing Entangled Polymer: Numerical Simulation of The Short-Chain Behavior and Interpretation of Phenomenology

Although some of the important consequences of flow-induced entanglement loss in entangled polymer rheology have recently been recognized, this specific molecular mechanism has rarely been investigated quantitatively based on experiments or molecular theories. For the first time, the amount of entanglement loss of a short entangled linear polymer (i.e., seven entanglements per chain at equilibrium) during fast-flow deformation is directly tracked in the stochastic simulation of an existing reptation model. The primary finding is that significant entanglement loss is observed in both fast elongation and fast shearing, and, contrary to some earlier conjectures, is particularly pronounced in elongational flow when polymer chain stretching formally commences. Furthermore, according to the current simulation in which three different CCR (Convective Constraint Release) schemes are considered, entanglement loss appears to have very prominent effects on the elongational rheology of an entangled linear polymer – an observation that had rarely been recognized or considered before. On the other hand, the currently explored features of flow-induced entanglement loss are tentatively linked to a wide variety of peculiar empirical properties of temporarily entangled polymer liquids. In particular, we are thus able to provide a consistent molecular explanation of the fairly well-known phenomenological effects of polydispersity and long-chain branching leading to a pronounced strain-hardening phenomenon, in view of two newly proposed effects of heterogeneous relaxations in preventing, directly or indirectly, fast entanglement loss during flows.     

滇池环湖截污干渠错峰技术模拟与分析

为了实现滇池流域截污效果的最大化,基于前期建立的东岸排水管网SWMM模型,结合该区域1995-2016年间降雨资料,研究环湖截污干渠的错峰调蓄技术。根据雨水干渠液位高度执行不同控制模式:当水位低于6.76 m时执行典型污染物浓度阈值控制模式;当水位高于6.76 m时执行典型污染物阈值控制的同时执行液位-污染物通量控制模式。采用SS和TN作为干渠截流的典型污染物控制指标,其控制浓度阈值分别取12和5 mg/L。模拟重现期为0.5~1 a降雨时SS、TN浓度-负荷通量调蓄方案下干渠负荷收集情况,结果表明两种调蓄方案均能有效提高雨水干渠的负荷收集率,提高污水干渠出口浓度,降低雨水径流对污水厂的高水量和低浓度冲击负荷。随着重现期增大,干渠对污染物的高效和最大化收集效果越明显。但是TN调控下污染负荷收集效果优于SS,因此选择TN作为干渠截流的最优典型污染物控制指标。     

强震区土石坝筑坝材料动力特性试验研究(投稿研究生论坛)

土石坝筑坝材料的动力特性是进行坝工设计和动力评价的基础。以西部强震区某土石坝工程为研究对象,采用室内动三轴试验,对其坝壳料、心墙料和坝基断层料进行动力特性试验研究,并以Hardin-Drnevich模型为基础,确定筑坝材料的动弹模、阻尼比等特性参数,试验表明：在动应变在10-6 ～ 10-5 范围内,动模量与围压、固结比成正相关;随动模量的增大,相关性降低;动应变和振级的拟合指数模型则表明不同围压、固结比的心墙料的应变-振级曲线趋势一致,坝壳料较为离散;试验中固结围压对粗骨料阻尼比-应变曲线的影响较固结比大,可为强震区土石坝的动力稳定评价提供可靠的理论依据。     

2种高剪切搅拌器流动特性的CFD模拟

采用计算流体力学模拟方法对2种用于分散混合过程的高剪切搅拌器的流动特性进行研究分析,分别是转子定子搅拌器(RS)和多级叶轮式搅拌釜(CF)。本文从流场细节和功率消耗方面对其进行考察研究,从而为解释搅拌器中气泡的分散混合过程提供理论依据。模拟结果表明,在RS中流体大致呈周向流动,且剪切速率分布相对较为均匀,较高剪切速率不仅出现在转子到壁面的径向间隙处,而且出现在转子与定子之间的轴向间隙处:而在CF中,流体呈现较为明显的旋转流动,且剪切速率分布没有RS均匀,较高的剪切速率只出现在叶轮与壁面的径向间隙处。在相同转速下,虽然这2种搅拌器所形成的平均剪切速率差别不大,但CF中所形成的最大剪切速率大于RS,这也意味着相同操作条件下CF中所能形成的气泡尺寸更小,这与实验结果是一致的。对于这2种搅拌器,在层流区功率准数与搅拌雷诺数都成反比,且CFD模拟计算得到的结果与根据实验得到的关联式的结果基本一致。然而CF的功率消耗高于RS的功率消耗。     

Failure load prediction of structural adhesive joints : Part 2: Experimental study

The objective of this study was to determine how the fracture of adhesive joints depends on elastic beam parameters describing the adherends and the applied loads. The basic specimen geometry was the cracked lap shear joint constructed of aluminium alloy with various adherend and bondline thicknesses. Loads were applied in different combinations of bending, tension and shear to generate a failure envelope for each adhesive and specimen geometry. It was found that crack propagation for precracked specimens occured at a critical strain energy release rate but was also a function of the G_I/G_II ratio and the bondline thickness. The experiments also showed that the loads required to propagate a crack in a precracked specimen were always lower than the loads required to break the fillet. Hence, by treating uncracked joints as being cracked, where the fictitious crack tip is assumed to coincide with the location of the fillet, a conservative estimate of the failure load is obtained.     

高分子聚合物约束阻尼复合结构的计算

摘 要 论述了高分子聚合物约束阻尼复合结构损耗因子的有限元计算方法，并详细研究了模态应变能法的理论分析及其在ANSYS软件上计算约束阻尼复合结构损耗因子的计算程序。     

重组铜绿假单胞菌外毒素A工程菌发酵及表达产物的纯化

目的建立稳定、高效表达重组铜绿假单胞菌外毒素A(rEPA)的工程菌发酵及表达产物纯化工艺。方法规模化发酵表达rEPA的重组大肠杆菌rPE553D,离心收集菌体,渗透压调解使菌体周质间隙蛋白释放后,高速离心收集蛋白溶液。经DEAESepharoseFF、PhenylSepharose6FF疏水层析和SOURCE30Q强离子交换层析,超滤浓缩纯化rEPA。用HPLC、SDS-PAGE和Westernblot等方法检定生化和免疫学特性,并用小鼠和Vero细胞检定毒性。结果每55L培养基中rEPA产量超过4g,纯度在95%以上,细胞毒性降低了至少32000倍。其余各项指标均符合《中国生物制品规程》要求。结论已建立了收率高、纯度好、稳定、适合规模化生产rEPA的工艺。     

螺杆挤压机混合能力的分析

分析螺槽中熔体的流动状态 ,运用加权平均总应变来评价螺杆挤压机的混合能力 ,进而提出提高混合能力的途径。对于单螺纹螺杆 ,稍长的计量段 ,稍浅的计量段螺槽及较高的螺杆转速 ,有利于混合作用 ;开发新型螺杆 ,如犁钉分流混合螺杆 ;研制高效混合型螺杆挤压机 ,如球窝型高效混合型螺杆挤压机