Strain waves in colliding bars having nonparallel faces

The paper reports the experimental investigation data for the effect that nonparallel faces of bars under impact exert on the parameters of longitudinal and bending strain waves generated in the bars. The changes in stress magnitudes in the bar under impact with growing angle of the impact faces offset are described. __________ Translated from Fiziko-Tekhnicheskie Problemy Razrabotki Poleznykh Iskopaemykh, No. 6, pp. 73–78, November–December, 2006.     

Spatiotemporal aspects of jerky flow in Al–Mg alloys, in relation with the Mg content

The spatiotemporal aspects of the Portevin–Le Chatelier effect in Al–Mg alloys are investigated using direct observations of the sample surface with a digital camera. Optical measurements of the surface profile using a white light interferometer allow the estimation of the local strain and strain rate associated with the bands. The effect of Mg content on instability characteristics is analyzed. The reloading time is shown to depend on the Mg content only at the strain and strain rates where type C bands are observed.     

糯扎渡心墙堆石坝心墙方案比较研究

糯扎渡工程在可行性研究阶段，比较了直心墙堆石坝和斜心墙堆石坝两种方案，分析表明，直心墙堆石坝在坝坡稳定性、坝体应力及抗震性方面均满足设计要求，且在地形地质条件、基础处理、抗震性能、施工方便性、工程造价等方面不同程度地优于斜心墙堆石坝，因此，设计最终选择直心墙堆石坝方案。     

An investigation of crack closure and the propagation of semi-elliptical fatigue cracks in Q1N (HY80) pressure vessel steel

The results of an experimental investigation of the effect of crack closure on the propagation of semi-elliptical fatigue cracks are presented. Load-shedding fatigue threshold tests were carried out at stress ratios of 0.2, 0.35, 0.5 and 0.7. Crack closure was measured at the surface and depth positions using backface strain gauges, near-tip gauges, and a clip gauge. Differences between the surface and depth growth behaviour are explained by considerations of the effects of the transition from plane stress conditions at the surface to plane strain conditions at the depth. The effects of stress ratios are attributed largely to differences in the crack opening displacement, which result in asperities coming into contact to induce roughness-induced crack closure.     

Flow stress of high density polyethylene and nylon 66 at high rates of strain

Measurement of the flow stress of high density polyethylene (HDPE) and nylon 66 at strain rates of 10³ s^?1 using a split Hopkinson pressure bar technique is discussed. The flow stress at a strain of 10% has been determined for both polymers at 20°C. The intrinsic errors involved in this technique are briefly reviewed. The results indicate that the flow stress of HDPE and nylon 66 were 50MPa and 150MPa, respectively, at strain rates of about 10³s^?1.     

Some experimental findings in compression-after-impact (CAI) tests of CF/PEEK (APC-2) and conventional CF/epoxy flat plates

Compression-after-impact (CAI) tests have been conducted for quasi-isotropic thick plates with 48 plies by using the NASA method and on plates with 32 plies by using the SACMA method. Specimens are made of CF/PEEK (APC-2) and conventional CF/epoxy for the NASA plates and CF/epoxy for the SACMA plates. In the NASA CAI tests, the sequence of delamination buckling and its propagation is clearly revealed through various experimental techniques. One major technique is moiré topography, and the other is thermo-mechanical stress analysis with a high-accuracy infrared sensor. The arrest of delamination propagation just before catastrophic failure due to high fracture toughness is clearly captured by the moiré camera. This behavior provides good CAI values of CF/PEEK. The initial buckling properties of the delaminated region by the impact are then extensively discussed. Numerical predictions of initial buckling stress have been obtained by modelled geometry of the delaminated region simplified from its precise structure clarified by ultrasonic C-scanning. They agree fairly well with the experimental results. The in-plane stress distribution in the delaminated region before initial buckling is measured by an infrared stress graphic system. This compared favorably with finite element predictions. Two types of symmetric buckling modes with respect to the central plate surface, twin and single peak ones, are experimentally captured.     

Optical analysis of crack tip stress fields: a comparative study

Four optical techniques for evaluating stress intensity factors in opaque specimens are described in outline, and compared for both an artificial crack and a fatigue crack. The results are compared to a standard solution for the geometry considered. All the techniques gave acceptable results over a range of stress levels and crack lengths. The methods of caustics and strain gauges were less good, whilst photoelasticity gave consistent results over a wide range of stress levels. Comments on the ease of application and the resource implications are also made in order to assist practitioners.     

Nonlinear Stress-Strain Relationship of Soil Reinforced with Flexible Geofibers

A nonlinear stress-strain relationship of soil reinforced with flexible geofibers under static loading is derived based on a nonlinear elastic stress-strain relationship of soil and a linear elastic stress-strain relationship of geofibers in the paper. This investigation includes the following aspects: First, the homogenization technique is introduced to find the volume average stress tensor and volume average strain tensor and further an elastic incremental stress-strain relation is introduced to describe deviatoric shear stress-axial strain relationship of equivalent homogeneous geofiber-reinforced soil. Second, the relation of geofiber numbers, content, mechanical behavior, distribution, and geometrical features to shear modulus of geofiber-reinforced soil is expressed and assessed by employing an elastic energy method. Third, the deviatoric shear stress and axial strain curves of geofiber-reinforced soil are calibrated by laboratory testing data of geofiber reinforced soil samples. Finally, the theoretical computational curves of geofiber reinforced soil are compared with the curves calibrated by testing data of geofiber reinforced soil. The model prediction has a good agreement with experimental results.     

Prediction of the twisting moment and axial force in a circular rubber cylinder for combined extension and torsion based on the logarithmic strain approach

The scope of the present work is the application of a particular class of strain energy function, based on the logarithmic strain, for the prediction of the twisting moment and axial force of a rubber circular cylinder under combined extension and torsion. The strain energy function involves four material parameters three of which are determined by fitting published experimental data from simple tensile and compression tests of natural rubber. One of the parameters of the proposed model has physical meaning, and it is equal to one ninth of the initial modulus of elasticity of the material. Hence, the number of unknown parameters is reduced to three. The logarithmic strain energy function is then applied to a combined extension and torsion problem of a rubber circular cylinder to check its performance for more complicated deformations. The results are compared with corresponding experimental and theoretical solutions available in the literature to validate the proposed model. It is found that the proposed strain energy function apart from predicting the common modes of deformations is also capable to determine more complicated types of deformation. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

非常规开采顺序在鸡冠嘴金矿二期采区的应用

针对鸡冠嘴金矿二期采区矿体(群)延深较大、走向较短、在垂向上中部较厚、品位较高呈“菱形”变化的特点，通过技术经济比较和岩石力学研究论证，并结合国内、外类似矿山的生产实践，提出并采用了不同于常规的首先开采矿体(群)中部的开采方法，从而为提高矿山生产初期的经济效益，尽早偿还基建贷款提供了一条新的成功经验。