Human urine - Chemical composition and fertilizer use efficiency

Stored human urine had pH values of 8.9 and was composed of eight main ionic species (> 0.1 meq L^–1), the cations Na, K, NH₄, Ca and the anions, Cl, SO₄, PO₄ and HCO₃. Nitrogen was mainly (> 90%) present as ammoniacal N, with ammonium bicarbonate being the dominant compound. Urea and urate decomposed during storage. Heavy metal concentrations in urine samples were low compared with other organic fertilizers, but copper, mercury, nickel and zinc were 10–500 times higher in urine than in precipitation and surface waters. In a pot experiment with¹⁵N labelled human urine, higher gaseous losses and lower crop uptake (barley) of urine N than of labelled ammonium nitrate were found. Phosphorus present in urine was utilized at a higher rate than soluble phosphate, showing that urine P is at least as available to crops as soluble P fertilizers.     

GaAs FET辐射退化研究

低噪声ＧａＡｓ ＦＥＴ和功率ＧａＡｓ ＦＥＴ经中子辐射都未发生致命性的通或断失效，直流偏置伏态下，其失效模式仅仅表现为源漏饱和电流ＩＤＳＳ的退化降低，据此提出了ＩＤＳＳ退化失效与快中子注量φｎ之间的解析关键式ｌｎｙ＝ａ＋ｂｌｎφ。     

The integral experiment on beryllium with D-T neutrons for verification of tritium breeding

A clean benchmark experiment on beryllium was performed with D-T neutrons at the FNS facility of the Japan Atomic Energy Agency. The main objective was to verify the integral data related to the tritium production on lithium isotopes. Tritium production rates, as well as activation reaction rates were measured inside the beryllium assembly that was shaped as a pseudo-cylindrical slab with an area-equivalent diameter of 628 mm and a thickness of 355 mm. Experimental results were analyzed with a three-dimensional Monte Carlo transport code MCNP-4C and FENDL/MC-2.0, JENDL-3.2/3.3 neutron transport libraries. Evaluation of reaction rates was based on the cross section data taken from the JENDL Dosimetry File and ENDF B-VI data libraries. Analysis shows that all calculation combinations (transport and activation cross section libraries) used for evaluation of reaction rates give data that is agreeable with measured values within 10%.     

COREX熔融气化炉热模拟研究

根据ＣＯＲＥＸ熔融气化炉的模拟试验，对预还原矿金属化率，煤种，预还原矿预热温度，煤炭流化床，炉渣，热平衡进行了分析研究，得到了合理的熔融气化炉冶炼参数。     

集成半导体器件的工作稳定性与频响设计

本文用频响特性与试验研究相结合的方法,对三个微电子产品实例进行模拟,讨论了如何设计补偿元件,防止自激振荡,保证闭环稳定且满足各项性能指标要求的问题。     

无溢流管多层流化床换热器的热态模型研究

本文对无溢流管多层流化床换热器进行了热态模型实验研究，得出了气－固两相间的界膜换热系数曲线，所得结论可供参考。     

电导法测定乙酸解离常数实验数据处理软件设计

介绍了用电导法测定乙酸解离常数的实验原理和步骤,给出了用计算机对电导法测定乙酸解离常数的实验数据进行处理的软件设计方法,同时给出了用Visual FoxPro 6.0编写电导法测定乙酸解离常数的处理软件的基本结构和部分程序代码。     

解剖学的数字化实验教学平台的构建探索

随着数字医学及数字医疗技术的迅速发展,针对高等医学院校解剖实验教学中存在的问题,如何提高解剖学教学质量,文章介绍了数字化解剖,并分析了数字化解剖实验室的特点,将云计算技术应用到管理数字化实验教学中。给出了基于云计算技术的数字化解剖实验教学平台解决方案,改革数字化解剖实验室,提出一种新的数字化解剖教学模式。     

中职学校的计算机上机实验课

通过分析当今社会对中职学校学生的要求和目前中职学校计算机上机实验课中存在的问题,探讨了如何提高中职学校的计算机上机实验课程的教学水平。并根据当前中职学生的状况和特点,结合平时的教学经验,提出一些教学观念。     

地震断裂带高铁大跨拱桥深基坑钢板桩围堰支护试验与监测

针对大跨度高速铁路拱桥建设对深基坑开挖施工的安全性要求,为了研究钢板桩围堰支护在大跨度高速铁路拱桥深基坑施工中的可行性,以新建徐盐高铁徐洪河特大桥工程项目为依托,通过数值模拟及现场试验监测,对深基坑钢板桩围堰支护在施工过程中的形变及受力情况进行分析。结果表明:通过有限元模拟分析,钢板桩围堰最危险受力点处于钢板桩中部、中上部及四角连接处,围堰第4道内支撑内力较其他3道内支撑大。整个施工过程中工况5为施工最不利工况。由监测结果可知,在施工过程中钢板桩单日最大位移值为2.8mm,最大累计位移值为24.0mm,均未达到预警值,施工过程中钢板桩形变稳定。钢支撑轴力受基坑周边荷载的影响明显,围堰钢支撑最大压力值为147.31kN,最大拉力值为24.95kN,未达到预警值,结构安全。研究结果可供同类型工程施工参考。