利用数据中心构建数字化钻井施工模式

世界石油钻井技术不断向信息化、智能化方向发展,为适应钻井技术的发展,构建了数字化钻井施工模式框架。从井场信息采集设施、井场网络环境、井场信息采集处理软件、井场工程监测软件等方面阐述了数字化钻井队的构建方法,从钻井数据库设计、数据流向及数据加载、数据发布等方面阐述了钻井数据中心的构成,从钻井设计系统、钻井远程监测系统、井眼轨迹控制系统以及专家系统等方面描述了钻井辅助决策平台主要功能。除了理论研究之外,还简要介绍了研究成果在现场的应用情况。这些研究成果是国内"数字油田"建设的基础,必将促进钻井行业的信息技术发展。     

Development,construction, and use of pneumometric tubes for measurement of steam flow in the steam lines of PVG-1000 at NPP

A system for the direct measurement of steam flow in steam lines after a steam generator, which utilizes a special design of pneumometric tubes and a computing unit that accounts for variation in steam pressure, has been developed to improve the quality of water-level regulation in the steam generators of VVéR-1000 power-generating units in the stationary and transitional modes. The advantage of the pneumometric tubes consists in their structural simplicity, high erosion resistance, and absence of irrevocable losses during measurement of steam flow. A similar measurement system is used at foreign NPP. The measurement system in question has been placed in experimental service at the No. 3 unit of the Balakovo NPP, and has demonstrated its worthiness. This measurement system can also be used to determine steam flow in the steam lines of NPP units with VVéR-1000 and VVéR-440 reactors, and PBMK-1000 power-generating units. __________ Translated from élektricheskie Stantsii, No. 3, March 2007, pp. 23–26.     

Electromagnetic Resistive Drift Instability in Current Carrying Low Temperature Tokamak Edges

It is shown that the purely growing electrostatic rippling mode can couple with the shear Alfven wave to give rise to an oscillatory electromagnetic instability in tokamak edge regions. This mechanism can be one of the causes of electromagnetic fluctuations observed near plasma edges. This instability can occur only in the very low temperature regions where resistivity fluctuations can become important due to large electron-ion collision frequency.     

ATM网络中CBR业务连接允许控制机制

该文提出了一种基于有限容量缓冲区下CBR业务信元丢失率和最小速率替换的线性近似连接允许控制机制，与原有的CAC机制相比，该文的CAC机制存在两个方面的改进：一方面，使用更合理、精确的CLR表达式，从而能够作出更为准确的连接允许判断：另一方面，能够提供服务质量服务。     

从模式I2C总线接口电路设计及其VLSI实现

提出了一种从模式的I^2C总线接口电路，该接口电路实现了对可变参数ASIC芯片的配置。该电路的设计使得可配置的ASIC芯片中参数配置所需要的芯片管脚大大减少。该方案已通过行为仿真和综合后门级时序仿真，并且用无锡上华0.6μmCMOS工艺实现。     

Evaluation of Morphology—Stable Critical Size of KNbO3 Crystals

Skeletal form of KnbO3 crystals growing in Li2B4O7 solvent was in-situ observed at 900℃ and it was found that shallow depression started to develop on the surface of KnbO3 crystals when the crystal size exceeded several micron,typically 7 micron.Based on the quantitative criterion derived by Chernov,the estimated critical size of KNbO3 crystals was 1 micron,which was consistent with the experimental measurement.The kinetic coefficients,Kcorner and Kcr,in the criterion were experimentally obtained in the diffusive-convective and diffusive-advective flow states respectively.     

偏振模色散统计特性的研究

利用动态方程研究了偏振模色散矢量的统计特性 ,分别用统计系综和频率系综两种方法进行数值模拟。数值结果表明 ,统计系综和频率系综两种方法的结果一致。在大归一化距离条件下 ,均方根时延的平方随归一化距离线性变化 ;偏振模色散矢量的各个分量服从高斯分布 ,差分群时延服从麦克斯韦分布 ;偏振模色散矢量弥散于整个邦加球     

分散网络制造浅谈

网络社会的制造业将是一个全球化的分散型的制造体系.分散网络制造是基于互联网的制造活动,因此,它具开放的、虚拟的,以及资源和技术更合理配置的特点.其组织模式是多种多样的,按现今国防工业现状,宜采用项目领导小组统一协调和控制下的分阶段动态联盟更为合适.为此,分析了网络无序化、企业属性知识不足、利益分配不易等问题带来的困难,并提出了一些建议.     

复合轴控制系统应用研究

复合轴控制是提高光电跟踪系统精度和控制带宽的一种有效手段，尤其在光束定向器系统中，不仅要求系统要稳定地跟踪上动态目标，而且必须将光束涣定在目标的某一点上，这对控制系统的要求是非常高的，必须采用双或三复合轴控制方式。     

��ɫ������������ѡ�꾮Һ����ģʽ

本文应用灰色关联分析方法,对70种不同类型和组成的钻井液,进行了两参数流变模式优选及评价。与现行方法比较的结果表明此方法与现行结果的吻合度高,并有新颖、数据要求量少、结论易于比较等优点。