海底输油管道内智能引导装置研究

对海底输油管道内智能引导装置研究的必要性进行了分析;介绍了国内外在该领域的技术发展状况。针对智能引导装置的作业对象和环境,提出了技术要求和指标,对智能引导装置进行了总体设计,分析了其作业机理,建立了力学模型并进行了计算。对智能引导装置的控制系统进行了设计,提出了设计过程中应注意的问题。所研制的管内轮式智能引导装置具有质量轻、输出牵引力大、体积小、结构紧凑等特点,对较小管内空间类似系统的设计有一定参考价值。     

贺兰山西麓中生代构造反转及意义

通过对小松山断裂特征的再分析和对顺层断层特征的观察研究发现,发育于贺兰山北段西麓的小松山“推覆”构造实际上是一个滑覆构造。该区于晚侏罗世之后发生大规模构造反转,贺兰山沉积特征及玄武岩环境指示该区是一大陆裂谷斜坡,在中生代早中期并不存在大规模的东西向挤压应力环境。滑覆面之下的三叠系—中上侏罗统的褶皱变形及顺层剪切是这种滑覆引起的局部构造变形,与鄂尔多斯地块西部发育的典型的东西向逆冲形成明显对比,值得重视。      

基于AFM的微结构加工实验研究

本文建立了微动工作台和原子力显微镜相结合的微加工系统，在该系统上采用金刚石针尖进行微加工实验，与SPI系统本身的刻划软件刻划出的图形进行了比较分析，得出这个系统适合微结构的加工；并给出了采用该方法加工的1111面及多边形面微结构；还分析了金刚石针尖几何角度及SPM和工作台的相关参数对加工的影响。     

Chemische Zusammensetzung und Mikrostruktur polymerabgeleiteter Gläser und Keramiken im System Si–C–O. Teil 2: Charakterisierung der Gefügeausbildung mittels hochauflösender Durchstrahlungselektronenmikroskopie und Feinbereichsbeugung

Chemical Composition and Microstructure of Polymer‐Derived Glasses and Ceramics in the Si–C–O System. Part 2: Characterization of microstructure formation by means of high‐resolution transmission electron microscopy and selected area diffraction Liquid or solid silicone resins represent the economically most interesting class of organic precursors for the pyrolytic production of glass and ceramics materials on silicon basis. As dense, dimensionally stable components can be cost‐effectively achieved by admixing reactive filler powders, chemical composition and microstructure development of the polymer‐derived residues must be exactly known during thermal decomposition. Thus, in the present work, glasses and ceramics produced by pyrolysis of the model precursor polymethylsiloxane at temperatures from 525 to 1550 °C are investigated. In part 1, by means of analytical electron microscopy, the bonding state of silicon was determined on a nanometre scale and the phase separation of the metastable Si–C–O matrix into SiO₂, C and SiC was proved. The in‐situ crystallization could be considerably accelerated by adding fine‐grained powder of inert fillers, such as Al₂O₃ or SiC, which permits effective process control. In part 2, the microstructure is characterized by high‐resolution transmission electron microscopy and selected area diffraction. Turbostratic carbon and cubic β‐SiC precipitate as crystallization products. Theses phases are embedded in an amorphous matrix. Inert fillers reduce the crystallization temperature by several hundred °C. In this case, the polymer‐derived Si–C–O material acts as a binding agent between the powder particles. Reaction layer formation does not occur. On the investigated pyrolysis conditions, no crystallization of SiO₂ was observed.     

Ca掺杂钨镁酸铅陶瓷材料的制备及其介电性能

研究了Ca掺杂钨镁酸铅(PMW)陶瓷材料的合成、结构、烧结以及介电性能。结果发现：在Ca^2 摩尔分数小于15％时，能形成单相的PCMW钙铁矿相，结构由原来的斜方相向立方相转变。用二步合成法制备的样品容易致密烧结，气孔率比一步法制备的样品小。Ca的加入降低了材料的介电损耗，在频率为1MHz时，介质损耗达到了10^-4。当Ca^2 摩尔分数大于10％时，材料的Curie峰宽化显著，介电常数温度系数降低。     

Effects of post annealing on removal of defect states in silicon oxynitride films grown by oxidation of silicon substrates nitrided in inductively coupled nitrogen plasma

Ultra thin (5 nm) silicon oxynitride (SiON) films were fabricated at a low temperature using nitrogen plasma generated by an inductively coupled plasma system. Effects of post-metalization annealing (PMA) of Al/SiON/Si MOS structure on the electrical properties of the SiON films were studied and correlations between the charge trapping states and the leakage current were established. Positive charge trapping by interface states generated by plasma damage was characterized by the hysteresis in high-frequency capacitance-voltage (C-V) characteristics. Hysteresis was observed to be completely removed by PMA while interface state density at the Si mid band gap reduced from 2.2×10¹³ to 3.7×10¹¹/eV/cm² and the oxide fixed charge density changed from 3.3×10¹² to −4×10¹¹/cm². The leakage current also decreased significantly, by more than two orders of magnitude, with PMA. The analysis of the leakage current using trap assisted tunneling (TAT) mechanism indicated that with PMA, the trap energy level in the SiON film becomes shallower from 1.3 to 0.7 eV. The positive trapped charges were observed to be annihilated by PMA and the trapping sites became neutral trap centers in the SiON film. This could lead to the reduction in the leakage current component given rise to by TAT.     

Implicit Leadership Theories in Applied Settings: Factor Structure, Generalizability, and Stability Over Time.

The present empirical investigation had a 3-fold purpose: (a) to cross-validate L. R. Offermann, J. K. Kennedy, and P. W. Wirtz's (1994) scale of Implicit Leadership Theories (ILTs) in several organizational settings and to further provide a shorter scale of ILTs in organizations; (b) to assess the generalizability of ILTs across different employee groups, and (c) to evaluate ILTs' change over time. Two independent samples were used for the scale validation (N1 = 500 and N2 = 439). A 6-factor structure (Sensitivity, Intelligence, Dedication, Dynamism, Tyranny, and Masculinity) was found to most accurately represent ELTs in organizational settings. Regarding the generalizability of ILTs, although the 6-factor structure was consistent across different employee groups, there was only partial support for total factorial invariance. Finally, evaluation of gamma, beta, and alpha change provided support for ILTs' stability over time. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

组合结构体的控制爆破拆除

根据待拆构筑物的结构特点和周围环境，分析论述构件倒塌的可能性。因地制宜选择，制定出合理的爆破方案。并通过对爆破参数，起爆网络，安全防护等进行精心设计和施工，拆除爆破达到了预期的效果。     

Oxidation of doped europium in BaMgAl10O17 by annealing studied by x‐ray‐absorption fine‐structure measurements

Abstract— We studied the influence of annealing in air on doped europium in BaMgAl₁₀O₁₇ by performing x‐ray absorption fine‐structure measurements. We determined the oxidation of doped divalent europium by annealing in air at over 500°C. The interatomic distance between the europium and the surrounding oxygen atoms was compressed by oxidation. It also appears that the oxidation process of europium is determined by the diffusion of oxygen into BaMgAl₁₀O₁₇.     

黄海地质构造与油气资源

针对以往黄海油气勘探在找油思路、勘探深度、勘探领域、勘探部署和勘探技术等方面存在的问题 ,概述了南、北黄海地质构造、盆地演化、油气地质特征及成藏条件 ,并在此基础上 ,提出了对黄海油气资源远景的几点认识