Thermal design method of bayonet-tube evaporators and condensers

The paper describes an effectiveness-NTU design method of bayonet-tube evaporators and condensers. Including the effect of the wall superheat on the shell-side film coefficient, and using an energy balance on the tube, differential equations for the steady-state fluid temperatures are formulated. Because of the nonlinear nature of the governing equations, the fourth-order Runge-Kutta method is employed to the solution of the finite difference equations. The results are iterated with the combination of integration techniques. An upper bound to the numerical error being ±5% the fluid temperature distribution as well as the exchanger effectiveness are determined, and presented as a function of the Hurd number, the number of heat transfer units and the flow arrangement. For flow entering through the inner tube, the temperature distribution displays the occurrence of a minimum at a point other than the tube-tip of the exchanger. In an extension of the analysis, an effort is made to illustrate the deviation of the results obtained by uniform film coefficient from the present study, and the differences are outlined.     

峒室爆破CAD设计方法研究

本文对峒室爆破断面布药计算机辅助设计参数驱动方法进行了探讨围绕断面布药主要参数的变化，提出一种基于参数驱动的计算机辅助设计方法，利用ｗｉｎｄｏｗｓ操作系统下的动态数据交换特性，对断面布药进行布药参数优化，实现了交互调整布药，形成一套断面布的计算机软件，为工程爆破设计实现计算机提供了一种可行的方法。     

Modified atmosphere packaging of a mixed prepared vegetable salad dish

The aim of this study was to design a modified atmosphere package for a mixed vegetable salad consisting of 75 g of cut carrot, 55 g of cut cucumber, 20 g of sliced garlic and 50 g of whole green pepper. Respiration data of all the components were combined with film permeability data to predict package atmospheres and design optimal packages for experimental testing for improved shelf-life of the produce. The optimal package avoided minimum O₂ and maximum CO₂ tolerance limits, and chilling injury temperatures for any component. A pouch form package made of 27 mm low density polyethylene developed a modified atmosphere of 2.0–2.1% O₂ and 5.5–5.7% CO₂, which was beneficial for all components and provided better quality retention than other test packages.     

The mechanics of compressive kinking in unidirectional fiber reinforced ductile matrix composites

Three distinct stages of kink band formation and propagation exist in ductile matrix composites subjected to compressive loading. These stages are called incipient kinking, transient kinking and kink band broadening. Each stage involves a different deformation mode. The mechanics governing each stage are discussed. Incipient kinking, where the peak load is attained, and kink band broadening, where the load attains a steady-state, are important in structural design. Two design philosophies are presented. References to pertinent literature are made throughout.     

变结构变参数设计方法及其在机械CAD中的应用

提出了一种新颖的机械结构设计思想－变结构变参数设计方法，并结合实例，阐述了变结构变参数设计的概念、原则、实施措施和意义。由此对Ｉ－ｄｅａｓ软件包进行了二次开发，编制了发动机曲轴专用ＣＡＤ软件程序，并用某型号发动机曲轴进行了验证。     

一种自制硬件诊断磁带的方法

牛哲成．一种自制硬件诊断磁带的方法．测并技术，１９９４，１８（２）：１４９～１５４硬件诊断磁带是由用于对计算机硬件系统各组成部分进行功能检查、状态测试和故障检测的诊断测试程序集构成的一种专用工具磁带。本文提出了一种用户在ＰＥ３２００系列计算机裸机环境下自己制作硬件诊断磁带的方法，井涉及到具体的程序实现。用该方法制作的硬件诊断磁带操作简单。对进一步搞好ＰＥ３２００系列计算机的维护，开发完善ＰＥ３２００系列计算机硬件诊断系统具有实际意义。     

Object-extending class transformations

Reorganisation and evolution of class hierarchies is important for object-oriented system development and has received considerable attention in the literature. The contributions of this paper are: (1) a formal study of a set of extension relations and transformations on class hierarchies; (2) a presentation of a small set of primitive transformations which form a minimal and complete basis for the extension relations; and (3) an analysis of the impact of these transformations at the object level.The study leads to a better understanding of evolution and reuse of object-oriented software and class hierarchies. It also provides a terminology and a means of classification for design reuse. The theory presented in this paper is based on the Demeter data model, which gives a concise mathematical foundation for classes and their inheritance and part-of relationships. Parts of the theory have been implemented in the Demeter System ^TM C++, a CASE tool for object-oriented design and programming.     

φ100mm定径机轧辊孔型设计改进

针对定径机换辊后定径钢管所出现的质量问题,提出了成品机架的轧辊孔型不分配变形量和适当增大孔型直径的改进措施。     

A Survey of Inverse Surface Design From Light Transport Behavior Specification

Inverse surface design problems from light transport behavior specification usually represent extremely complex and costly processes, but their importance is well known. In particular, they are very interesting for lighting and luminaire design, in which it is usually difficult to test design decisions on a physical model in order to avoid costly mistakes. In this survey, we present the main ideas behind these kinds of problems, characterize them, and summarize existing work in the area, revealing problems that remain open and possible areas of further research.     

自升式平台深水化改造的新模式及其可行性分析

针对我国现有自升式平台存在的不能满足深水域勘探开发的要求以及造价过高等问题,提出一种自升式平台深水化改造新模式——分体坐底自升式平台,在基本不改变原有平台结构的基础上,通过增加可沉浮平台下体,使作业水深增加50m以上,而造价比同工作水深的常规自升式平台低得多。文章介绍了该分体坐底自升式平台的结构方案、作业工况及操作程序,分析了该平台的技术可行性和经济可行性,并提出了深入研究和具体实施需要解决的问题。