用钛白废酸和废铁屑制备聚合硫酸铁试验研究

利用钛白废酸和废铁屑制备了无机高分子絮凝剂聚合硫酸铁。详细研究了聚合硫酸铁制备过程中各因素对亚铁氧化、三价铁水解和聚合等过程的影响。确定了制备聚合硫酸铁的最佳工艺条件为：(1)氧化过程：pH为1．5，氧化剂与亚铁的物质的量之比为0．3，氧化温度为60℃，氧化时间为3h；(2)聚合过程：硫酸根与全铁的浓度比为1．4，陈化时间为2h。     

Optimising P2O5 availability for fertilizer use,by direct treatment of apatite with hydrochloric or nitric acids

Hydrochloric and nitric acid treated apatite is not directly used as a fertilizer because of the hygroscopic character of the products. Another problem arises from the volatility of these acids and that acidulated product undergo reversions during drying with loss of the acid. We have found that apatite beneficiated with hydrochloric and nitric acids dried at an optimum temperature ~120°C has high available phosphorous. The products can be stored in the solid form in sealed polythene bags.Sumanasekara Chair in Natural Science     

Phosphate availability in calcareous Vertisols and Inceptisols in relation to fertilizer type and soil properties

The availability to plants of fertilizer phosphorus (P) applied to soil, as measured by chemical extraction, is used to estimate P fertilizer needs. We studied the availability of P, applied as monocalcium phosphate (MCP) powder, ordinary superphosphate (OSP) granules and diammonium phosphate (DAP) granules in 24 calcareous Vertisols and Inceptisols of Andalusia, Spain, by using laboratory incubation techniques. The soils differed widely in their P adsorption- and Ca-phosphate precipitation-related properties. For MCP, availability (defined as the proportion of added P that is recovered by extraction with NaHCO₃ or is isotopically exchangeable) decreased markedly with incubation time and increasing addition rate. The mean recoveries after 180 d of incubation at field capacity at a rate of 246 mg P kg^–1 soil were 17% for Olsen P, 38% for Colwell P, and 16% for isotopically exchangeable P (IEP). Increasing the application rate to 2460 mg kg^–1 resulted in recoveries of 6% for Olsen P, 25% for Colwell P, and 4% for IEP. While IEP-based recovery was not significantly correlated to any soil property, that based on Olsen P (and, to a lesser extent, Colwell P) decreased sharply with increase in the ratio of clay (or Fe oxides) to total (or active) calcium carbonate equivalent. Accordingly, Olsen P might overestimate P availability in those soils relatively rich in carbonate and poor in clay and Fe oxides. On the other hand, recovery of applied P from soils containing more clay and Fe oxides, by a sequential extraction (with H₂O, two 0.5M NaHCO₃ treatments, 0.5M HCl), was lower than 100%, thereby suggesting phosphate occlusion by Fe oxides or clay.Availability of the fertilizers tested 90 d after application was found to decrease in the following order: MCP powder (rate, 246 mg kg^–1) > DAP granules (rate, 547 mg kg^–1) > MCP powder (rate, 738 mg kg^–1) > OSP granules (rate, 308 mg kg^–1). Differences between fertilizers tended to increase with increasing carbonate content in the soil. This may have been due to precipitation of Ca phosphates caused by the presence of Ca in the fertilizer and the high Ca- supplying capacity of the more calcareous soils.     

Piezoresistivity in Polymer-Ceramic Composites

Composite materials composed of randomly dispersed semiconducting ceramic particles in an insulating polymer matrix show a pronounced change in resistivity with pressure. Different amounts of iron oxide (Fe₃O₄) powder and antimony-doped tin oxide (SnO₂:Sb) powder were dispersed in an epoxy polymer matrix to form pressure-sensitive composites. In each family of materials, an insulator-to-semiconductor transition is observed in agreement with percolation theory. Composites within a certain range of filler content showed substantial piezoresistive effect under both uniaxial and hydrostatic pressure in which sensitivity is controlled by the choice of filler material and the volume fraction. The effect of temperature on the piezoresistance effect was also examined. Piezoresistors made from Fe₃O₄ composites showed larger temperature changes than those filled with Sb-doped SnO₂.     

Reaction products of ammonium nitrate phosphate fertilizers of varying water-soluble phosphorus content in different Indian soils

Studies were undertaken on the isolation and identification of reaction products of ammonium nitrate phosphate (ANP) fertilizers containing 30, 50 and 70 per cent water-soluble phosphorus (WSP) of total phosphorus in representative soils of the vertisol, oxisol, alfisol, entisol, mollisol and aridisol groups of India. ANP fertilizers were applied in solid form to soil, and reaction products formed at and around the site of ANP fertilizer placement were identified after six weeks incubation in moist soils by X-ray diffraction technique. DCPD (dicalcium phosphate dihydrate- CaHPO₄ · 2H₂O) was the major reaction product of ANP fertilizers containing 30 and 50 per cent WSP in vertisol, entisol, aridisol, mollisol, oxisol and alfisol, and of ANP containing 70 per cent WSP in vertisol, entisol, alfisol, aridisol and mollisol. DCP (dicalcium phosphate-CaHPO₄) was detected with ANP of 30 and 50 per cent WSP in the vertisol, alfisol, entisol, mollisol and aridisol groups of soils. In addition to DCPD, FePO₄ · 2H₂O (metastrengite) and AlPO₄ · 2H₂ O-monoclinic (metavariscite) were formed in alfisol and oxisol soils with ANP of 30 and 50 per cent WSP. FePO₄ · 2H₂O and AlPO₄ · 2H₂O (metavariscite) were identified in alfisol and oxisol soils while AlPO₄ · 2H₂O-orthorhombic (variscite) was formed in alfisol soils with ANP of 70 per cent WSP.     

钒钼酸铵分光光度法快速测定磷酸二铵中有效五氧化二磷

为了快速测定磷铵中P2O5含量,将0.1mol/LEDTA预热至80±2℃作为DAP有效P2O5的提取液,提取时间25min以上。鉴于正磷酸根在酸性介质中与钼酸盐及偏钒酸盐生成稳定的黄色化合物,在400nm波长下,利用示差法测定P2O5仅需50～55min。该方法的相对标准偏差(RSD)为0.13%～0.28%,回收率99.1%～101.1%,精密度和准确度好。     

钢铁件常温黑化工艺的研究

研究改进了现行的钢铁件常温黑化工艺，通过极化曲线测试，耐蚀性测试，寿命测试得到了性能良好的常温亚硒酸体系黑化液，结果表明：适当的向黑化液中引入添加剂A，稳定性N，表面活性剂聚乙二醇（6000）可以提高;黑化液的稳定性以及黑化层的耐蚀性与黑化液的寿命。     

Crystallization kinetics of low‐density polyethylene and polypropylene melt‐blended with a low‐Tg tin‐based phosphate glass

The nonisothermal and isothermal crystallizations of low‐density polyethylene (LDPE) and polypropylene (PP) in phosphate glass (Pglass)–polymer hybrid blends were studied through differential scanning calorimetry (DSC). As the Pglass volume fraction was increased, the percentage crystallinity decreased. The half‐time for crystallization decreased as the propagation rate constant rose, for both of the polymer matrices, with increasing Pglass concentrations. The Pglass was observed to be a nucleating agent for formation of two‐ or three‐dimensional spherulites in the hybrids. Tensile modulus improved for both of the Pglass–polymer hybrids up to 40% Pglass, but the energy to break decreased. Tensile strength changed slightly with the addition of Pglass to the LDPE matrix, exhibiting a larger value than that of pure LDPE at 30%. The tensile strength decreased as more Pglass was added to the PP matrix. The observed differences between tensile properties of the Pglass–PP and Pglass–LDPE hybrids at identical Pglass volume concentration were found to be consistent with that of the crystallization behavior of the hybrids. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3445–3456, 2003     

铬铁矿液相氧化的热力学分析

液相氧化法生产铬酸盐技术是对传统火法焙烧技术的突破．在600～900K温度范围内对液相氧化法处理铬铁矿的熔盐体系各反应趋势及物相组成的热力学进行了分析研究，对液相氧化法处理铬铁矿各体系的反应自由能变化（△G°R）与温度（T）关系的计算结果表明，铬铁矿中的（Mg,Fe）（CrO2）2在较低温度下与NaOH、O2具有较强的反应趋势，比传统的火法焙烧方法反应温度降低了873K，节约大量能源;铬铁矿中的杂质相在反应温度下进行一系列副反应，生成硅酸盐、铝硅酸盐等新相．     

重钙装置改产磷铵反应与尾气洗涤系统设备出现的问题

介绍瓮福磷肥厂重钙(TSP)装置改产DAP后,反应与尾气洗涤系统料浆泵、搅拌器、反应器、洗涤泵、重要阀门在运行中出现的问题及处理措施.