脂肪醇聚氧乙烯醚的厌氧与好氧生物降解性

以脂肪醇聚氧乙烯醚(AEO)为目标污染物，在等同条件下做厌氧消化污泥和好氧活性污泥对其生物降解性能的对比实验，得出了同一系列AEO分子中聚氧乙烯基与整个分子的降解难易程度的关系。表明：①污泥会对AEO分子产生吸附一脱附作用而出现假降解率，克服假降解率的干扰是准确测定AEO生物降解性的关键因素；②厌氧和好氧条件下，AEO均可降解，但厌氧降解要稍优于好氧降解；③AEO中聚氧乙烯基的单元数(n)是影响其生物降解的重要因素，相同碳链的直链烷基，生物降解率随n的增加而明显降低。     

Sintering of Ceria-Doped Tetragonal Zirconia Crystallized in Organic Solvents, Water, and Air

Amorphous CeO₂–ZrO₂ gels were prepared by coprecipitation in ammonia solutions. The onset of crystallization of the gels, from calcining in air, was 420°C, while 200° to 250°C in the presence of water and organic solvents such as methanol and ethanol. The sintering behaviors of CeO₂–ZrO₂ powders were sensitive to the crystallizing conditions, since hard agglomerates formed when the precipitated gels were crystallized by normal calcination in air, whereas soft agglomerates formed when they were crystallized in water or organic solvents. CeO₂–ZrO₂ powders crystallized in methanol and water at 250°C were sintered to full theoretical density at 1150° and 1400°C, respectively, whereas that crystallized by calcination in air at 450°C was sintered to only 95.2% of theoretical density, even at 1500°C.     

Aerobic selective oxidation of (hetero)aromatic primary alcohols to aldehydes or carboxylic acids over carbon supported platinum

The synthesis of substituted benzaldehydes, benzoic acids, heterocyclic aromatic aldehydes and acids has been studied via the oxidation of the aromatic alcohols with air under mild pressure (<20 bar) at 100 °C, in the presence of a 1.95 wt.% Pt/C catalyst. The solvent was found to play the most important role in determining the selectivity of the oxidation products. Changing the solvent enabled tuning the reaction either to the aldehyde (pure dioxane), or the carboxylic acid (dioxane/aqueous solution without or with addition of sodium hydroxide). This oxidation method allowed to effectively oxidize many substituted benzylalcohols with various electron-releasing or -attracting groups (NO₂, Me, OMe, Cl, Br, OH, phenyl, …) and heterocyclic alcohols including nitrogen and sulphur atoms (2-thiophenemethanol, 2- and 4-pyridine methanol compounds).     

甲磺酸伊马替尼的合成

以4-甲基-3-硝基苯胺为起始原料,经过缩合、还原、环合等反应制得抗肿瘤药物甲磺酸伊马替尼。并分别讨论了采用无水碳酸钾代替二异丙基乙胺、水合肼和普通催化剂代替铂炭催化剂以及采用异戊醇作为溶剂的优点。最终反应总收率超过50%,用高效液相色谱分析产品纯度在99.5%以上。     

国内外AE／AES生产现状及市场分析

介绍国内外脂肪醇聚氧乙烯醚(AE)和脂肪醇聚氧乙烯醚硫酸盐(AES)的生产现状及供需情况.2003年全球AE的总产能为391.7万t/a,总产量为155.8万t,总消费量为148.3万t;AES的总产能为377.5万t/a,产量约为300万t,消费量约为90万t.2004年我国AE的产能已超过50万t/a,但产量只有15万t,消费量为30.5万t;AES的总产能为37.95万t/a,产量为14万t,市场需求约10万t.最后补充介绍乙氧基化的技术进展.     

Effects of branching upon some surfactant properties of sulfated alcohols

A study was undertaken to determine the surfactant properties of various sulfated alcohols. Most notably, the Krafft point and the ability to emulsify decane were studied. A series of sulfated Guerbet alcohol and Guerbet alcohol alkoxylate sulfates with 16 carbon atoms and an analogous series based upon cetyl alcohol, a linear C₁₆, were studied as hydrophobes.     

Separation of 1,3-propanediol from glycerol-based fermentations of Klebsiella pneumoniae by alcohol precipitation and dilution crystallization

The separation of 1,3-propanediol from the glycerol-based fermentation broth of Klebsiella pneumoniae plays an important role during the microbial production of 1,3-propanediol. In this paper, the separation of 1,3-propanediol from fermentative broth by a combination of ultrafiltration and alcohol dilution crystallization was investigated. The broth was first filtered by ultrafiltration, and 99% of cells, 89.4% of proteins and 69% of nucleic acids were removed. The obtained broth was further condensed by vacuum distillation, and then alcohol was added. The macromolecular impurities, such as nucleic acids, polysaccharides and proteins, were precipitated, and inorganic and organic salts were crystallized. The optimal volume ratio of alcohol added to the condensed fermentation broth was determined to be 2:1. As a result, proteins, nucleic acids and electric conductivity decreased by 97.4%, 89.7% and 95.8%, respectively, compared with the fermentative broth. The influences of pH and water content in condensed broth on alcohol precipitation and dilution crystallization were also investigated. The experimental results indicated that alcohol precipitation and dilution crystallization was feasible and effective for the separation of 1,3-propanediol from actual fermentation broth. Translated from The Chinese Journal of Process Engineering, 2006, 6(3): 454–457 [译自: 过程工程学报]     

Acid-Base Properties of Zirconium, Cerium and Lanthanum Oxides by Calorimetric and Catalytic Investigation

The combined use of calorimetric and catalytic methods for the investigation of the acid-base properties of oxide systems is discussed with reference to the authors' work on pure and doped zirconia samples, ceria-zirconia and ceria-lanthana solid solutions. Adsorption microcalorimetry of ammonia and carbon dioxide had been used to characterize the samples, whose chemical and thermal history was taken into account. The catalytic behavior of these samples in the conversion of 4-methylpentan-2-ol, route to 4-methylpent-1-ene (starting product for the manufacture of polymers of superior technological properties), had also been studied. On the basis of the calorimetric data, a rationale for interpreting the data for the transformation of 4-methylpentan-2-ol is formulated, which takes into account the role of the concentration and strength of the sites in governing the competition among the various mechanisms for dehydration and dehydrogenation.     

淀粉-聚乙烯醇可生物降解塑料研究进展

本文详细综述了近年来国内外淀粉基聚乙烯醇塑料的研究进展。     

Study of the amination of fatty alcohols catalyzed by Cu−Ni catalysts

Amination of fatty alcohols by hydrogenation and dehydrogenation catalysis is one of the main commercial processes for the production of dimethylalkylamines. The key factor in this process is the preparation of catalysts with high selectivity. A study of amination catalyzed by Cu−Ni catalysts supported on CaCO₃ is reported in this paper. Selectivity of the catalysts was adjustable by varying the ratio of Cu to Ni or by adding a third element (Zn or Mg). The promotion of catalyst selectivity was mainly attributable to the effect of the components on the reducibility of Ni²⁺ in the catalysts. Lower reducibility of Ni²⁻ led to higher catalyst selectivity.