高速电喷镀制备纳米PTFE镍基复合镀层

研究了以Q235和65Mn钢为基底,经高速电喷镀形成的纳米PTFE镍基复合镀层,考察了喷射速度对镀层沉积速率、表面显微硬度、结晶组织形貌以及镀层结合力的影响,探讨了喷射速度影响镀层性能组织的原因机理。结果表明,喷射速度在4.2～6.3m/s时获得的镀层有较高的沉积速率和表面硬度,晶粒细小、组织致密,镀层结合力较高。     

磨料射流技术用于石油管道表面预处理

从工作原理、工艺流程、技术参数、装置组成等方面 介绍已应用于胜利油田生产的磨料射流油管表面预处理生产线,应用证明：它具有处理质量好、速度快、无污染、操作简便等优点,是进行油管表面预处理的全新工艺.     

跌坎型底流消能工的跌坎最小深度研究

跌坎型底流消能工消力池内的水力特性受到跌坎深度的影响。应用平面紊动射流理论,以消力池内允许的最大时均动水压强为控制目标,对于跌坎最小深度的确定方法进行了初步分析,建立了计算跌坎最小深度值的理论公式。通过水力学试验方法,得到消力池底板时均动水压强与跌坎最小深度之间的关系,同时与跌坎最小深度试验值进行了比对,对本文建立的理论公式进行了验证。     

Ski jump trajectory with consideration of air resistance

In the case of the ski-jump type energy dissipation,the jet trajectory will be greatly affected by the air entrainment and the air resistance.It is necessary to consider those factors when estimating the trajectory of the jet flow.In this work,the effect of the air resistance on the jet trajectory is theoretically and experimentally investigated.A comprehensive resistance coefficient is proposed.To determine this coefficient,experiments of five models are conducted with the circular-shaped flip bucket placed at the point of the takeoff of ski jumps.It is shown that,this coefficient of the lower jet trajectory is only related to the approach flow Froude number,while that of the upper jet trajectory is dominated by both this Froude number and the deflection angle.Furthermore,the present methodology is validated by experimental data in this work and the maximum errors are not larger than 3.2%and 8.6%for the lower and upper jet trajectories,respectively.     

小型湖泊应用于地表水源热泵时的热承载能力分析

分析了小型湖泊应用于地表水源热泵时的两种热承载能力计算方法——水面温度法和均匀混合法,并采用其计算了杭州小型湖泊应用于地表水源热泵时的热承载能力。计算结果表明：水面温度法较客观地反映了实际的排水混合及水温恢复过程,可信度更高。用水面温度法对7个代表性城市小型湖泊热承载能力进行分析的结果表明：夏季热承载能力在23-4—29．5W／m2之间,冬季热承载能力在31．6～45．7W／m2之间;设计这类系统的关键在于满足夏季热承载能力的约束。     

NUMERICAL STUDY OF HYDRODYNAMICS OF MULTIPLE TANDEM JETS IN CROSS FLOW

The hydrodynamics of a single jet and four tandem jets in a cross flow are simulated by using the Computational Fluid Dynamics (CFD) software Fluent. The realizable model is used to close the Reynolds-Averaged equations. The flow characteristics of the jets, including the jet trajectory, the velocity field and the turbulent kinetic energy are obtained with various jet-to-cross flow velocity ratios in the range of 2.38-17.88. It is shown that a single jet penetrates slightly deeper than the first jet in a jet group at the same , although the difference decreases with the decrease of . It is also found that the way in which the velo-city decays along the centerline of the jet is similar for both a single jet and the first jet in a group, and the speed of the decay increases with the decrease of . The downstream jets in a group are found to behave differently due to the sheltering effect of the first jet in the group. Compared with the first jet, the downstream jets penetrate deeper into the cross flow, and the velocity decays more slowly. The circulation zone between the two upstream jets in the front is stronger than those formed between the downstream jets. The Turbulent Kinetic Energy (TKE) sees a distinct double-peak across the cross-sections close to each nozzle, with low values in the jet core and high values in the shear layers. The double-peak gradually vanishes, as the shear layers of the jet merge further away from the nozzle, where the TKE assumes peaks at the jet centerline.     

DRILLING CHARACTERISTICS OF COMBINATIONS OF DIFFERENT HIGH PRESSURE JET NOZZLES

The high speed fluid jet for directly or indirectly breaking rock is one of the most effective ways to improve the deep penetration rate.In order to maximize the efficiency of energy use,the flow characteristics of different combinations of high pressure jet nozzles are analyzed through numerical simulations.According to the velocity vectors at the bottom and the bottom hole pressure diagram,the effects of the high pressure nozzle combinations on the flow structure and the penetration rate are analyzed.It is shown that the combination of three vertical edge nozzles is very efficient,but inefficient in cleaning the bottom hole and eroding the wall.The jet velocity is 400 m/s and the radius is 5 mm,with a center nozzle added,the problem can be solved,but the high-pressure fluid displacement would increase.The center nozzle’s jet velocity is 200 m/s and the radius is 8 mm,the combination of two vertical edge nozzles and a center tilt nozzle or that of a vertical edge nozzle and a center tilt nozzle would provide a flow structure favorable for drilling.The angle of inclination is 10o.To take advantage of high pressure jet energy to improve the efficiency of drilling,it is important to select a suitable nozzle combination according real conditions.     

新立城水库坝基防渗高压摆喷灌浆参数试验

新立城水库土坝坝基属于双层地基,即表层为粘性土层,下面为沙砾石层。坝基下砾质粗砂和细砾为强透水层,连续分布。因需要防渗的透水层不厚(仅2～5m),采用高压喷射灌浆封堵透水层。施工前选定与坝段同样地质条件的试验场,用实际施工的喷灌设备分不同方案进行原型试验,开挖后观察成墙效果,最后确定施工技术参数。     

热水喷射泵制冷系统的热力学分析

本文研究了利用低温工业余热或太阳能的喷射泵制冷系统,应用混合的“正向”与“逆向”联合循环概念并采用所提出的“逆向度”参数,证明可以方便地求解这种系统的热力学分析。对不同工质进行的热力学计算数据表明,热水系统具有达到较好总体性能的潜力。     

金刚石自支撑膜的高温红外透过性能

由于金刚石具有低吸收和优异的力学与导热性能使其成为长波(8~12μm)红外光学窗口材料的重要选择。对于许多极端条件的应用,化学气相沉积(CVD)金刚石自支撑膜的高温光学性质至关重要。应用直流电弧等离子喷射法制备光学级金刚石自支撑膜进行变化温度的红外光学透过性能研究,采用光学显微镜、X射线衍射、激光拉曼和傅里叶变换红外-拉曼光谱仪检测CVD金刚石膜的表面形貌、结构特征和红外光学性能。结果表明:在27℃时金刚石膜长波红外8~12μm之间的平均透过率达到65.95%,在500℃时8~12μm处的平均透过率为52.5%。透过率下降可分为3个阶段。对应于透过率随温度的下降,金刚石膜的吸收系数随温度的升高而增加。金刚石自支撑膜表面状态的变化,对金刚石膜光学性能的影响显著大于内部结构的影响。