On using peak amplitude and rise time for AE source characterization

Acoustic Emission (AE) signals, which are electrical version of acoustic emissions, are usually analysed using a set of signal parameters. The major objective of signal analysis is to study the characteristics of the sources of emissions. Peak amplitude(P _a ) and rise time(R _t ) are two such parameters used for source characterization. In this paper, we theoretically investigate the efficiency ofP _a andR _t to classify and characterize AE sources by modelling the input stress pulse and transducer. Analytical expressions obtained forP _a andR _t clearly indicate their use and efficiency for source characterization. It is believed that these results may be of use to investigators in areas like control systems and signal processing also     

提高储层预测精度技术思路与对策

采用地质、地震、测井人员协同一体化作业，对地下地质目标进行综合预测与评价，可提高储层预测精度，降低预测结果的多解性。主要方法是针对不同的区块，采用不同的方法和对策，首先从单井储层划分对比入手，建立储层沉积模式，同时对地震数据目的层段进行精细解释，建立地层构造模式，用沉积、构造等地质规律来指导和约束反演；利用测井资料对地震资料进行精细标定，建立各井的单井波阻抗模型，建立井数据和地震数据沟通的桥梁；在严格的测井约束、地质模型约束、层位控制下进行储层反演；充分利用地质、地震反演结果、地震参数提取及分析结果、测井、测试和分析化验等资料对储层预测结果进行综合分析与评价。该方法应用于长庆、大庆、准噶尔等实际区块，取得了较好的效果。     

Calorimetric determination of the enthalpy change for the binding of methyl orange to poly(vinylpyrrolidone) in aqueous solution

Thermodynamic parameters have been determined for the interaction of methyl orange and poly(vinylpyrrolidone) in aqueous solutions containing tris, tris and hydrochloric acid, or water only. Enthalpy changes were determined by use of a flow microcalorimeter. Free energy changes were calculated from the results of equilbrium dialysis studies. The results are interpreted in terms of the behaviour of poly(vinylpyrrolidone) in these systems. Analysis of data shows that the hydrophobic interactions in the systems are in the order: tris > wateronly > tris-HC1.     

活性炭中甲烷水合物的生成动力学

在温度275．75－279．95K和压力5．6－9．6MPa的静置条件下，测定了14组甲烷水合物在活性炭中的生成动力学数据（压力－时间关系），分析了甲烷水合物在活性炭中生成的物理过程，结合边界层理论和结晶学原理，提出了单液膜传质控制机理的生成动力学模型，并求得了解析解,使用Levenberg-Marquardt方法拟合模型参数，模型预测值与实验值符合良好。     

舞钢扁钢锭咬边参数的确定

本文根据我公司自产的11.7t及13.34t扁钢锭在4200mm轧机生产过程中,运用正交试验方法,合理应用咬边参数的轧制方案,以此降低金属消耗。此方案使“咬入返回轧制”及“留尾轧制”新技术进一步得到完善,板形更加矩形,使锭一材成材率提高2％左右。     

Residue curve maps for reactive distillation systems with liquid-phase splitting

A model has been developed to study the effects of chemical kinetics on the residue curve maps (RCM) for reactive distillation systems with liquid phase splitting. In the model, chemical reaction can occur in both or only one of the two liquid phases. The heating policy V/V₀=H/H₀ is applied so that the kinetic effect can be described by a single parameter, the Damköhler number Da. The effects of reaction kinetics on pseudohomogeneous and heterogeneous mixtures have been compared. The properties of their RCMs are the same outside, but are fully different inside the liquid-liquid (L-L) region if they have different chemical equilibrium curves. Inside the L-L region, the chemical equilibrium curve coincides to a unique reactive liquid-liquid tie line in case that the pseudohomogeneous chemical equilibrium curve intersects with the L-L envelope. When the reaction occurs in only one of the two liquid phases, the residue curves inside the L-L region are strongly affected by the L-L envelope, especially at high Da. In the present paper, first an illustrative arbitrary reaction system, and then the reaction of cyclohexene with water to cyclohexanol are analysed with respect to their RCMs.     

铜街子工程坝基预裂控制爆破

本文介绍了在复杂地质条件下,通过反复试验、采用预裂爆破技术在玄武岩坝基进行各种坡面角度的全方位、大面积的生产性实践,并对预裂控制爆破提出了一些意见和具体施工方法.     

Development and characterization of magnetorheological polymer gels

Magnetorheological materials have been used in many applications in recent years. To develop new materials, polyurethane and silicone polymer gels were investigated. Rheology is qualitatively controlled for each system by controlling the concentration of reactants and diluents. The resulting polymers have solid, gel, or liquid states, depending on the crosslinking and dilution. The gels were characterized through kinetic analysis. Differential scanning calorimetry (DSC) was used with analysis methods to find the kinetic properties for diluted and undiluted polyurethane systems. Heat of reaction, order of reaction, preexponential constant, and activation energy were obtained from the experimental DSC data. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2733–2742, 2002     

Modelling of a gas flow measurement: Application to nuclear containment vessels

The objective of this work is to simulate the gas flow across a concrete wall of a nuclear power plant internal enclosure. In the laboratory, permeability measurements are generally made on cylindrical samples (15 cm diameter×5 cm height: ∅ 15×5 cm) with a steady-state experiment. To be able to predict structural behaviour, we studied size effect and steady-state time with a modified CEMBUREAU permeability test. A statistical approach showed that there is no size effect on concrete permeability. Laboratory results found on cylindrical samples can be applied to tests in situ, where concrete specimens are thicker. A model based on the mass balance relation provided times to reach steady state and reproduced experimental flow kinetics for uniform water content across specimens.     

On the Direct Addition of Amine N–H to Ch≡C Triple Bonds with Late Transition Metal Catalysts

The kinetics of the transition metal-catalysed direct addition of amine NH bonds to carbon--carbon multiple bonds (hydroamination) has been explored by in situ spectroscopic techniques. From an open mass balance it was concluded that an intermediate species was formed during the cyclisation of 6-aminohex-1-yne. This species was identified as the enamine 2-methylene-piperidine, which is the primary hydroamination product.