Analytic methods for modeling longitudinal data from rolling therapy groups with membership turnover.

Interventions for a variety of emotional and behavioral problems are commonly delivered in the context of treatment groups, with many using rolling admission to sustain membership (i.e., admission, dropout, and discharge from group are perpetual and ongoing). The authors present an overview of the analytic challenges inherent in rolling group data and outline commonly used (but flawed) analytic and design approaches to addressing (or sidestepping) these issues. Moreover, the authors propose use of latent class pattern mixture models (LCPMMs) as a statistically and conceptually defensible approach for modeling treatment data from rolling groups. The LCPMM approach is illustrated with rolling group data from a group-based alcoholism pilot treatment trial (N = 128). Different inferences were made with regard to treatment efficacy under LCPMM vs. the commonly used standard group-clustered latent growth model (LGM); coupled with other preliminary findings in this area, inferences from LGMs may be overly liberal when applied to data from rolling groups. Continued work on data analytic difficulties in groups with membership turnover is critical for furthering the ecological validity of research on behavioral treatments. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

膜结构裁剪膜片展开的二次测地线法

本首先对目前应用较广的膜结构裁剪方法，即裁剪线生成与图形展开的方法进行了比较研究，并在此基础上提出了一种新的裁剪方法——二次测地线法．通过对有理论解算例的分析及对不同形式的膜结构进行裁剪，验证了本方法的正确性、可靠性及广泛适用性．     

基于自然地理形态的道路测设及其曲线方程的拟合

在山区村镇及风景旅游名胜区的建设中，其道路的曲线测设，往往要基于自然地理形态进行，也就是路径的选择，有时具有不可选择性，且要求与实地具有最大的符合性。因此，其测设的作业方法不同于一般意义的道路测设；其曲线方程的建立，也是极其困难的。本就基于自然地理形态的道路测设工作的曲线类型的选择、曲线的拟合方法、曲线方程的建立及其数据的计算，提出了利用CAD技术进行曲线拟合、曲线方程的建立、曲线计算的实用技术方法。     

图形电镀铜的常见缺陷及故障排除

本文主要阐述印制电路板生产中图形电镀铜常见缺陷及成因,查找影响其品质的因素和工序并结合相关生产制定相应的预防措施,有效提高产品质量。     

信息理解系统的结构及理解过程

主要讨论消息理解的基本模式及其信息理解系统，并且讨论了二类消息的语义理解例以及理解客观度．     

面流消能近底紊动流速特性的研究(面流消能试验研究之一)

本文主要论述了面流消能五种典型流态近底紊动流速特性,总结出了近底时均流速和紊动强度沿程变化规律,提出了近底紊动流速可能出现的最大瞬时值及相应位置的计算公式。面流消能工程的下游防冲设计中考虑的主要水力参数之一是,消能段近底流速紊动可能出现的最大瞬时值及其相应的部位,但目前国内外研究成果较少。笔者通过水工模型试验重点研究了面流消能各典型流态近底流速及其紊动纵向分量沿程的变化规律,并提出了计算公式,为优化面流设计提供科学依据。     

A fuzzy diagnosis approach using dynamic fault trees

By incorporating digraph models, fault trees and fuzzy inference mechanisms in a unified framework, a novel approach for fault diagnosis is developed in this work. To relieve the on-line computation load, the fault origins considered in diagnosis are limited to the basic events in the cut sets of a given fault tree. The symptom occurrence order associated with each root cause is derived from system digraph with the qualitative simulation techniques. The implied candidate patterns are enumerated according to two proposed theorems and then encoded in the inference system with IF-THEN rules. The simulation results show that the proposed approach is not only feasible but also capable of identifying the most likely cause(s) of a hazardous event at the earliest possible time.     

应用人工神经网络优化五点法水平井井网

水平井直井联合布井方式越来越多地应用到油田的实际开发中，但是井网的选择与优化方面的研究比较少，特别是没有根据不同开发阶段变化的生产动态对水平井井网进行优化。应用人工神经网络技术，在进行数值模拟计算的基础上，制作样本并训练网络，可预测任意面积、任意水平井长度下的五点法水平井井网在不同开发阶段的生产动态，优化出不同生产时间和不同井网面积条件下最优井网穿透比，即生产10a时最优井网穿透比为0．55～0．8。与数值模拟结果进行对比，最大误差在1％以内，表明这种方法既快速简便又具有较高的精确性，可以有效地指导五点法水平井井网优化设计。     

提花织物意匠和纹板CAM系统

CAM系统的研制是从国情出发,保持传统产品特点和工艺要求,能适应多品种多规格的需要,有使用方便和通用性强的优点,并且在小样彩色图案的输入和识别处理、意匠过程中顺势间丝、影光、泥地处理等难题上有突破性发展,达到了实用要求。