GaAs FET辐射退化研究

低噪声ＧａＡｓ ＦＥＴ和功率ＧａＡｓ ＦＥＴ经中子辐射都未发生致命性的通或断失效，直流偏置伏态下，其失效模式仅仅表现为源漏饱和电流ＩＤＳＳ的退化降低，据此提出了ＩＤＳＳ退化失效与快中子注量φｎ之间的解析关键式ｌｎｙ＝ａ＋ｂｌｎφ。     

A region-based selective optical flow back-projection for genuine motion vector estimation

Motion vector plays one significant feature in moving object segmentation. However, the motion vector in this application is required to represent the actual motion displacement, rather than regions of visually significant similarity. In this paper, region-based selective optical flow back-projection (RSOFB) which back-projects optical flows in a region to restore the region's motion vector from gradient-based optical flows, is proposed to obtain genuine motion displacement. The back-projection is performed based on minimizing the projection mean square errors of the motion vector on gradient directions. As optical flows of various magnitudes and directions provide various degrees of reliability in the genuine motion restoration, the optical flows to be used in the RSOFB are optimally selected based on their sensitivity to noises and their tendency in causing motion estimation errors. In this paper a deterministic solution is also derived for performing the minimization and obtaining the genuine motion magnitude and motion direction.     

Analysis of low load transients for the Vandellòs-II NPP: Application to operation and control support

The Technical University of Catalonia (UPC) has been jointly working with the Asociación Nuclear Ascó-Vandellòs (ANAV) for a number of years in order to establish, qualify and use best estimate (BE) models for the reactors under the control of ANAV. ANAV is the consortium that is responsible for operation of the Ascó and Vandellòs-II reactors. The reactors are Westinghouse-design three-loop PWRs with an approximate electrical power of 1000 MW. The existing integral plant models for each plant are currently used for many different purposes among which are support of plant operation and control. Quite a number of studies have been done in order to improve both safety and plant competitiveness. Most of these dynamic analyses were carried out in relation to transients starting at nominal full power or at least, very close to full power. This paper develops a specific use of the Vandellòs-II plant model for operation and control support at low power involving new ranges of system actuation parameters. It also examines scenarios that are somewhat different from those typically analysed. The study starts showing the results of an assessment case, which is a start-up test and provides some additional qualification, and subsequently attempts to establish calculations to support both an improvement in feed water controls and to set up operating recommendations for low-load manual operation of feed water turbo-pump. Both results hopefully, will produce an outcome, which leads to an improvement in safety and reduces reactor trip probability.     

Engineering Model of a Nonisobaric Heavily Laden Gas‐Particle Jet

An axisymmetrical model of a rapid nonisobaric heavily laden gas‐particle jet is developed. The model is based on the general functions for both axial and radial pressure distributions, which were discovered by a numerical study of rapid gas‐particle jets by the CFD code. The model equations were solved analytically. The results obtained by the model developed are in good agreement with those computed by the CFD code for a wide range of flow parameters.     

Developing real-time knowledge-based systems with PERFECT

PERFECT (Programming EnviRonment For Expert systems Constrained in reasoning Time) is aimed at providing the necessary engineering support in real-time knowledge-based system development. PERFECT bridges the gap between the traditional analysis and design methodologies, and the implementation tools for these systems. It does so by providing the means to construct a knowledge model and to choose a suitable inference strategy. Subsequently the properties of the knowledge model and inference strategy may be analysed. For instance, it may be checked whether the knowledge model contains sufficient knowledge to diagnose a fault in an industrial process. Moreover, it may be checked whether the inference engine is able to provide an answer to a certain problem in time. If not, the analyser of PERFECT proposes an alternative structure of the knowledge model. When the constructed knowledge model and the chosen inference strategy show the required time efficiency, the compiler of PERFECT may translate them to an actual real-time knowledge based system in COGSYS. In addition, guidelines are provided with respect to the design of the human-machine interface. The resulting system is an instrument—a source of information that can be used by the human operator during problem-solving, rather than a prosthesis—a device that solves the entire problem by itself and presents the outcome to the human operator.     

Vorticity field structure associated with the 3D Tollmien-Schlichting waves

Details of the vorticity field structure associated with the 3D Tollmien-Schlichting waves have been examined based upon the recent numerical studies of the subject. First, a single obliquet-s wave has been found to have the velocity component parallel to the wave front playing an overall dominant role, in particular, to create the longitudinal vorticity. The so-called Benney-Lin longitudinal vortices are then demonstrated to be, in fact, a minor consequence compared with the localized longitudinal vorticity field and its periodic pumping. Finally, the formation of the longitudinal vorticity field in the fundamental- and subharmonic-mode interactions is explained. The research reported in this paper has been supported in part by Bundesministerium für Forschung und Technologie and by Deutsche Forschungsgemeinschaft. The major part of the paper has been presented at the Third Asian Congress of Fluid Mechanics, 1–5 September 1986, in Tokyo, as a General Lecture by the senior author, FRH.     

BINELOCA 程序与广东岭澳核电站大破口失水事故分析

ＢＩＮＥＬＯＣＡ程序是在吸收国外先进大破口失水事故分析计算机程序的基础上，针对我国现有大破口失水事故分析程序的不足和工程应用方面的问题，采用了一些成熟的、新型的和当今国际公认的瞬态热工水力数学物理模型以及水和蒸汽性质参数计算公式改编而成的大破口失水事故分析程序。通过对广东岭澳核电站大破口失水事故的计算表明，ＢＩＮＥＬＯＣＡ程序计算的结果与法国计算的结果是一致的。     

高炉炉缸内铁水环流与内衬侵蚀

从分析中心焦柱在炉缸内的受力出发，计算了１０００￣５５８０ｍ＾３高炉大喷煤前后中心焦柱在炉缸铁水内的沉入深度，分析了炉缸内铁水环流的产生与炉缸内衬侵的关系，分析表明大喷煤有得利抑制铁水环流对缸内补的冲刷，提出了降低铁水环流对炉缸内衬侵蚀的途径。     

高压条件下伴随化学反应两相流动的数值模拟

建立了高装填密度火药床在高压条件下的一维两相流体力学方程组，探讨了两相自由射流边界的处理方法，并对其进行了数值求解．揭示了对流燃烧过程的燃烧机理．数值结果与实验测得的压力曲线和火焰阵面曲线有较好的一致性     

ANALYSIS OF EXPERIMENTAL AND NUMERICAL RESULTS OF A TURBULENT SWIRLING FLOW IN A TUBE

In many applications swirling flow is used to enhance heat and mass transfer. One of the problems of modelling a turbulent swirling flow is the choice of the turbulent closure model which is acceptable for engineering purposes. To evaluate which model performs best, numerical results are compared with experimental data. Local velocity measurements are carried out on a swirling flow in a circular tube. The measurement method is hot-wire anemometry combined with visualization techniques. The numerical analysis is carried out using the k-ε model and the Algebraic Stress Model. In the experiment a symmetrical swirl was observed, Comparing the experimental data with the numerical results shows that the Algebraic Stress Model represents the experimental data quite well, whereas the k-ε model fails.