Lateral WSe2 Homojunction through Metal Contact Doping: Excellent Self-powered Photovoltaic Photodetector

Here an IR-heating chemical vapor deposition (CVD) approach enabling fast 2D-growth of WSe₂ thin films is reported, and the great potential of metal contact doping in building CVD-grown WSe₂-based lateral homojunction is demonstrated by contacting with TiN/Ni metals in favor of holes/electrons injection. Shortening nanosheet channel to ≈2 µm leads to pronounced enhancement in the performance of diode. The fabricated WSe₂-based diode exhibits high rectification ratios without the need of gate modulation and can work efficiently as photovoltaic cell, with maximum open circuit voltage reaching up to 620 mV and a high power conversion efficiency over 15%, empowering it as superb self-powered photodetector for visible to near-infrared lights, with photoresponsivity over 0.5 A W⁻¹ and a fast photoresponse speed of 10 µs under 520 nm illumination. It is of practical significance to achieve well-performed photovoltaic devices with CVD-grown WSe₂ using fab-friendly metals and simple processing, which will help pave the way toward future mass production of optoelectronic chips.     

An analytical procedure for dynamic response determination of a viscoelastic beam with moderately large deflection using first-order shear deformation theory

In this article, the dynamic response of a viscoelastic beam with moderately large deflection subjected to transverse and axial loads is studied using the first-order shear deformation theory. The von-Karman strain displacement relations and Hooke's law are used for formulation. The solution of the equations, which are a system of nonlinear partial differential equations, are obtained analytically using the perturbation technique in conjunction with the eigenfunction expansion method. The results are compared with the finite elements method. Also, a sensitivity analysis is performed, and the effects of geometrical and material properties are investigated on the response.     

Lateral Magnetically Modulated Multilayers by Combining Ion Implantation and Lithography

The combination of lithography and ion implantation is demonstrated to be a suitable method to prepare lateral multilayers. A laterally, compositionally, and magnetically modulated microscale pattern consisting of alternating Co (1.6 µm wide) and Co‐CoO (2.4 µm wide) lines has been obtained by oxygen ion implantation into a lithographically masked Au‐sandwiched Co thin film. Magnetoresistance along the lines (i.e., current and applied magnetic field are parallel to the lines) reveals an effective positive giant magnetoresistance (GMR) behavior at room temperature. Conversely, anisotropic magnetoresistance and GMR contributions are distinguished at low temperature (i.e., 10 K) since the O‐implanted areas become exchange coupled. This planar GMR is principally ascribed to the spatial modulation of coercivity in a spring‐magnet‐type configuration, which results in 180° Néel extrinsic domain walls at the Co/Co‐CoO interfaces. The versatility, in terms of pattern size, morphology, and composition adjustment, of this method offers a unique route to fabricate planar systems for, among others, spintronic research and applications.     

Anticipating Cutoff Diameters in Deterministic Lateral Displacement (DLD) Microfluidic Devices for an Optimized Particle Separation

Deterministic lateral displacement (DLD) devices enable to separate nanometer to micrometer‐sized particles around a cutoff diameter, during their transport through a microfluidic channel with slanted rows of pillars. In order to design appropriate DLD geometries for specific separation sizes, robust models are required to anticipate the value of the cutoff diameter. So far, the proposed models result in a single cutoff diameter for a given DLD geometry. This paper shows that the cutoff diameter actually varies along the DLD channel, especially in narrow pillar arrays. Experimental and numerical results reveal that the variation of the cutoff diameter is induced by boundary effects at the channel side walls, called the wall effect. The wall effect generates unexpected particle trajectories that may compromise the separation efficiency. In order to anticipate the wall effect when designing DLD devices, a predictive model is proposed in this work and has been validated experimentally. In addition to the usual geometrical parameters, a new parameter, the number of pillars in the channel cross dimension, is considered in this model to investigate its influence on the particle trajectories.     

The lateral load-deformation response of RC walls with a consideration of the height–length ratio

Reinforced concrete (RC) walls play an important role in resisting earthquakes, so understanding the lateral load-deformation response of an RC wall subjected to an axial load, shear, and moment is essential to nonlinear structural analysis. In this study, the moment-bending deformation response of an RC wall under an axial load and moment is obtained from moment–curvature analysis using the wall’s proper plastic hinge length. Furthermore, modified compression-field theory, adjusted according to the height–length ratio of the wall, is used to calculate the shear–shear deformation response of the wall under an axial load and shear. By integrating the moment-bending deformation and the shear–shear deformation responses, the lateral load-deformation response of the RC wall under axial load–moment–shear interaction can be reasonably determined. To confirm the reliability of the proposed method, experimental results for 67 RC walls are compared with analysis results from the proposed method. The statistical results show that the proposed method accurately predicts the lateral ultimate load but somewhat underestimates the lateral ultimate deformation. Finally, this paper gives an example using an equivalent column to simulate an RC wall using SAP2000 pushover analysis.     

金属薄膜屈服强度的鼓包法表征

本文采用鼓包法研究金属薄膜的屈服强度,对具有圆形自由窗口的镍薄膜一侧施加压力,薄膜受压变形的全场形貌用数字散斑相关法(DSCM)进行测量,并应用板壳理论分析小挠度变形下膜内应力分布情况。结果表明:圆形薄膜受压时首先从边缘开始屈服,从压力-挠度曲线偏离线性关系的临界点得到金属镍膜的屈服强度为467MPa,这和单轴拉伸法测量所得到的屈服强度值吻合较好。     

单向拉伸条件下补片参数对复合材料胶接修复结构的影响

建立含中心半穿透圆孔的损伤金属板修补结构的三维有限元模型,以应力集中系数(Stress Concentration Factor,SCF)和挠度w作为复合材料胶接修复效果的指标,分析单向拉伸条件下,正方形补片的长度、厚度和铺层方式对修复效果的影响。结果表明:补片长度取孔直径的3.5倍、厚度取孔深度的0.6~0.8倍、铺层方式取0°/90°铺层时,复合材料单面修复含损伤裂纹板的效果较好。根据分析结果制备了实验件,进行了单向静拉伸实验,修补实验件的破坏强度比未修补实验件提高了10.1%。     

Uniting Strength and Toughness of Al Matrix Composites with Coordinated Al3Ni and Al3Ti Reinforcements

Hybrid aluminum composites are fabricated in a novel manner to characteristically induce a layer‐wise aligned distribution of micro‐scale Al₃Ni and Al₃Ti intermetallic particles that are formed in situ within a ductile Al matrix. The simple and unique Rolling of Randomly Orientated Layer‐wise Materials (RROLM) manufacturing methodology enables microstructural tailoring of the intermetallic reinforcing particles to prescribe enhanced crack tip deflection caused by the complex interaction of local veins of reinforcement particles, in an effort to overshadow the classical loss of toughness in large‐particle reinforced composites. The complimentary reinforcements and their interface with the Al matrix are revealed to have a gradual transition zone that functions to maintain critical cohesion with the particles and the matrix, empowering the superior load transfer capability of the particles, and reducing microvoid penetration into the matrix. In situ three‐point bending observations combined with a local strain field analysis, demonstrate the distinctive crack deflection mechanisms exhibit by the composite. Deviating from the norm, this specialized particle reinforced composite exhibited both strengthening and toughening mechanisms simultaneously, over control samples. The investigated design strategy and model material will assist materials development toward light‐weight, stronger, and tougher particle reinforced Al matrix composites.     

提高阿基米德螺旋相控阵换能器焦点声压的仿真研究

针对阿基米德螺旋相控阵换能器焦点声压不足的问题,通过有限元仿真,分别讨论了换能器阵元形状和频率改变与声场的变化关系,从焦点声压、偏转范围、栅瓣水平、焦域大小等方面进行了研究。结果表明,相同频率下,扇形阵元阿基米德螺旋相控阵换能器的焦点声压比圆形阵元时的焦点声压提高了32.28%,偏转范围为20 mm×20 mm×40 mm;在扇形阵元形状的情况下,频率选择0.9~1.0 MHz,不仅能获得较高的焦点声压,同时还能保证改善聚焦性能。文章的仿真结果为阿基米德螺旋相控阵换能器提高焦点声压,满足深部组织消融治疗需要的高功率要求提供了有用的设计参考。     

基于模式识别的桥梁故障检测

文章主要任务是研究如何从挠度数据出发,综合运用模式识别技术和数据分析技术,能有效检测桥梁中某些类型的损伤和隐患。将模式识别中的近邻算法与K-均值算法相结合,应用到桥梁检测中,提出了一种新的桥梁异常检测方法。首先,用K均值算法对数据进行聚类分析,寻找数据之间的相似性,识别出模式,将桥梁挠度数据归类;然后,在分析阶段运用改进的近邻算法进行分析检测。由于最近邻和k-近邻的交替使用,保证了检测结果的准确率。将上述方法应用于重庆菜园坝大桥的模拟检测,取得了较好的效果,并具有一定理论价值和潜在应用价值。