基于Multisim8的压控振荡电路仿真分析

介绍了Multisim8的仿真功能的特点，并通过实例说明了用Multisim8进行仿真分析的具体方法，简单介绍了如何设置参数和进行仿真操作。     

Specific interactions in blends containing Chitosan and functionalized polymers. Molecular dynamics simulations

Chitosan (CS)/poly(vinyl alcohol) (PVA) and Chitosan/poly(2-hydroxyethyl methacrylate) (P2HEM) blends have been studied through molecular dynamic simulations. In a previous work it was found miscibility between these polymers and it was attributed to hydrogen bonding formation. However, the experimental information obtained was not enough to know which of the interacting groups of Chitosan, i.e. -CH₂OH or -NH₂, are responsible of the interaction. Therefore, we have performed molecular dynamics simulation runs of 1 ns in order to calculate radial distribution functions (RDF) for the groups tentatively involved in the interaction. The results are correlated with our previous experimental data. This way, we have obtained a more precise conclusive information about the interactions involved as function of the blends composition. For low compositions of PVA and P2HEM the interaction is predominantly with the hydroxymethyl groups of CS while as the composition of PVA and P2HEM increases, the interaction with the amine groups increases.     

Disorder effects on the strain response of model polymer networks

Molecular dynamics simulations are used to investigate polymer networks made by either end-linking or randomly crosslinking a melt of linear precursor chains. The resulting network structures are very different, since end-linking leads to nearly ideal monodisperse networks, while random crosslinking leads to polydisperse networks, characterized by an exponential strand length distribution. Networks with average strand length 20 and 100 were generated. These networks were used to study the effects of disorder in the network connectivity on observables averaged either over the entire network or selected sub-structures. Heterogeneities in the randomly crosslinked networks cause significant differences in the localization of monomers, however, neither the localization of crosslinks nor the microscopic strain response are significantly affected. Compared to end-linked networks, randomly crosslinked networks have a slightly increased tube diameter, and as a result a slightly decreased shear modulus, but otherwise identical stress-strain behavior. For the investigated systems, we conclude that the microscopic strain response, tube diameter, and stress-strain relation are all insensitive to the heterogeneities due to the linking process by which the network were made.     

基于Protel DXP的电路仿真设计

Protel DXP是集所有设计工具于一身的电子设计自动化(EDA)软件.文中运用其内嵌的仿真器叙述了分压式偏置电路放大器的仿真设计过程,设计过程简单、方便.在电子线路理论教学过程中引入电路设计仿真环节在不同情况下对电路进行实时分析,不仅可以提高学生的学习兴趣,而且能够在较短时间内加深学生对理论知识的理解;在工程设计过程中利用仿真工具对电路进行即时测试,可以缩短设计周期,提高设计效率.     

日本地震简介和日建设计的抗震设计

为更好地帮助读者理解本刊各篇论文的内容,本文简要介绍日本的地震状况,日建设计对地震设计的考虑方法,以及日建设计的设计用人工模拟地震波。     

Matlab语言与线性电路的符号仿真

目前的电路仿真软件通常是在电路中所有元件值都是给定的情况下得到一些数值结果，而非解析结果。该文利用Matlab的符号运算功能编程，通过节点列表法，实现了任意线性电路的自动解析求解，为电路分析提供了一个有效的辅助工具。     

基于随机分析和概率预测的固定式海洋平台结构风险评估研究

对极端海况进行了环境荷载的联合概率分析。引入了整体不确定性和敏感性分析理论,利用非正态过程、具有不同相关性的多变量随机模拟技术,求解结构的失效概率。提出结构失效分析的新方法,并利用DNV提供的历史数据,对结构失效的后果做了适当分析。以埕北12-C井组平台为实例,对平台甲板高程(Air Gap)失效分析进行了实例计算。结果表明,使用多维联合极值分布理论及相应的求解方法,是离岸工程结构物风险评估的重要手段。     

铁路桥梁横向振动模拟及适应快速行车结构型式的研究

针对铁路提速后出现的上承式简支钢板梁桥跨中横向振幅过大的问题,以羊楼司桥(L=32m单跨上承式简支钢板梁桥)为例进行实桥检测和数值模拟,建立车辆、线路、桥梁三者的联合模型,考虑轮轨接触力,应用MSC/DYTRAN大型结构分析程序进行车线桥动力相互作用的仿真分析。研究揭示我国用量最多的C62型货车以70∽80km/h的速度空载通过时,该跨度的钢板梁桥发生横向谐振的机理。此外,用该方法对32m跨长的组合梁结构进行桥梁动力特性及列车走行性分析,表明该结构满足提速货车和高速电动旅客列车走行的要求。研究结果对我国高速铁路桥梁建设和既有桥梁的改造具有积极意义。     

Triple tangent flank milling of ruled surfaces

This paper presents a positioning strategy for flank milling ruled surfaces. It is a modification of a positioning method developed by Bedi et al. [Comput Aided Des 35 (2003) 293]. A cylindrical cutting tool is initially positioned tangential to the two boundary curves on a ruled surface. Optimization is used to move these tangential points to different curves on the ruled surface to reduce the error. A second optimization step is used to additionally make the tool tangent to a rule line, further reducing the error and resulting in a tool position, where the tool is positioned tangential to two guiding rails and one rule line. The resulting surface has 88% less under cutting than the method of Bedi et al.