在3．39μm波段甲烷吸收特性的测量与应用研究

报道了甲烷气体在３．３９μｍ波段吸收特性的研究结果，及其在３．３９μｍ波段多波长干涉测量中的应用。通过改变甲烷吸收室的充气参数，使激光器工作在双等光强工作点，并完成了绝对距离的干涉测量。     

用傅里叶变换计算单缝衍射的光强分布

现代光学和通讯理论由于引入了傅里叶变换的方法，使计算光学系统和通讯系统的物像的对应关系简洁、清晰。该文用傅氏变换计算长为２ａ、照度为Ａ的均匀缝光源在观察面上的光强分布为Ｉ（ｘ）＝│Ｅ（ｘ）│＾２＝ＡＡ＾２ａ＾２（ｓｉｎ２πｆａ／２πｆａ）此方法也可运用于矩形孔、圆孔等。     

Solubilization of unilamellar liposomes by betaine-type zwitterionic/anionic surfactant systems

The mechanisms governing the solubilizing interactions between zwitterionic/anionic mixed surfactant systems at different molar fractions of the zwitterionic surfactant (X_zwitter) and neutral or electrically charged unilamellar liposomes were investigated. The mixed systems were formed by N-dodecyl-N,N-dimethylbetaine and sodium dodecyl sulfate in the presence of piperazine-1,4-bis-(2-ethanesulfonic acid) buffer at pH 7.20. Unilamellar liposomes formed by egg phosphatidylcholine, in some cases together with stearylamine or phosphatidic acid, were used. Solubilization was detected as a decrease in static light-scattering of liposomes. Two parameters were regarded as corresponding to the effective surfactant/lipid molar ratios (Re) at which the surfactant system (i) saturated the liposomes, Re_sat, and (ii) led to a total solubilization of liposomes, Re_sol. From these parameters the bilayer/aqueous medium surfactant partition coefficients for the saturation (K_sat) and complete bilayer solubilization (K_sol) were determined. When X_zwitter was 0.40, The Re and K parameters showed a maximum, whereas the critical micellar concentration (CMC) of these systems exhibited a minimum, regardless of the electrical charge of bilayers. Given that the ability of the surfactant systems to saturate or solubilize liposomes is inversely related to the Re_sat and Re_sol parameters, these capacities appear to be directly correlated with the CMC of the mixed systems. The similarity of both K_sat and K_sol (particularly for X_zwitter=0.2–0.8) suggests that a similar partition equilibrium governs both the saturation and the complete solubilization of bilayers, the free surfactant concentration (S_a,S_b), remaining almost constant with similar values to the CMC for each mixed system studied.     

A study of the static and dynamic properties of side-chain liquid crystalline polymers in low molar mass mesogens

The static and dynamic properties of solutions of a side chain polysiloxane liquid crystal polymer have been studied in a cyanobiphenyl nematic host as a function of concentration and temperature. Refractive index measurements were carried out on aligned samples and the data used to determine the macroscopic order parameter, S, using Haller's method. Photon correlation spectroscopy has been used to measure ($\text{k}{}_{22}\text{γ}{}_1$) for the pure nematic solvent and the solutions. From these measurements it appears that the static properties vary slowly and linearly with increasing polymer concentration whilst the dynamic or viscoelastic properties change markedly. This change has been attributed to γ₁, the twist viscosity, and the results have been discussed in terms of the function of the siloxane polymer backbone.     

动载荷下应力强度因子的边界元计算

用Ｎａｒｄｉｎｉ－Ｂｒｅｂｂｉａ边界元法计算了动载荷下的应力强度因子，与解析解及有限元解相比较，效果较好。最后对计算结果进行了分析讨论。     

散射式浊度测量仪

浊度是一项评定水质的重要技术指标。如何提高测量浊度的精度是国内外一直在研究的问题之一。文章介绍了作者在散射式浊度测量仪设计过程中，为提高浊度的测量精度和稳定性所做的工作。在测量仪的部件（光学系统，电路系统等）设计中，采取了许多特殊方法，使浊度测量的各项精度指标都得到了较大的提高。     

单色光石英退偏器的退偏机理及性能研究

研究了单色光石英退偏器的退偏机理；定义了退偏度作为衡量退偏器性能的物理量。从实验上在４４０～９２０ｎｍ的光谱范围测试了器件的退偏度，结果表明：只要器件的结构角适当，或者适当调节入射光束的截面大小，便可对某一单色线偏振光实现很好的退偏。     

离子注入硅的线源非相干光瞬时退火温度计算

本文利用高温模型,计算了在我们的实验条件下对离子注入硅进行线源非相干光瞬时退火的退火温度,并与实验结果比较,两者符合得较好。