An experimental study of the thermodynamic properties of 1,1-difluoroethane

Experimental vapor pressures andP--T data of an important alternative refrigerant, 1, 1-difluoroethane (HFC-152a), have been measured by means of a constant-volume method coupled with expansion procedures. SixtyP--T data were measured along eight isochores in a range of temperaturesT from 330 to 440 K, at pressuresP from 1.6 to 9.3 MPa, and at densities from 51 to 811 kg·m^–3. Forty-six vapor pressures were also measured at temperatures from 320 K to the critical temperature. The uncertainties of the temperature and pressure measurements are within ±7mK and ±2kPa, respectively, while the uncertainty of the density values is within ±0.1%. The purity of the sample used is 99.9 wt%. On the basis of the measurements along each isochore, five saturation points were determined and the critical pressure was determined by correlating the vapor-pressure measurements. The second and third virial coefficients for temperatures from 360 to 440 K have also been determined.     

变形镜交连值的优化分析

关于优化光波控制,自适应光学校正是至关重要的一个环节,可用于改善激光光束质量及校正光束在传输过程中气流引起的波前畸变等。变形镜是其核心器件,而交连值是影响变形镜校正精度的关键因素。针对变形镜实际使用时需要对致动器进行一定的约束,利用带约束的最小二乘法,分析了在一定约束条件下交连值变化对变形镜校正精度及控制稳定性的影响。以Zernike像差和以大气湍流模型构造的像差为校正对象,寻找校正效果最好的交连值。结果表明各阶Zernike像差对应的最优交连值差异较大,最优交连值主要分布在15%～35%之间。从控制误差引起的校正效果变化的方面考虑,对正方形致动器排布的最优交连值位于15%～25%区域。     

Changes in seebeck coefficient of Pt and Pt 10% Rh after use to 1700°C in High-purity polycrystalline alumina

A technique is presented that enables the effects of temperature on the Seebeck coefficient to be assessed for individual wires. The technique, involving a high-resolution thermoelectric scanning rig and a nonuniform conditioning furnace of known temperature profile, was applied to 0.5-mm-diameter wires of Pt and Pt 10% Rh. Changes were observed in Seebeck coefficient when these wires were used in high-purity twin-bore insulation for up to 200 h at temperatures over the range 500 to 1700°C. Contamination from the insulation was found to be transmitted by a vaporization process, having an activation energy of 3 eV. This caused changes of up to 0.14 V · °C^–1 in Pt and 0.01 V · °C^–1 in Pt 10% Rh. Rhodium transfer to the pure Pt wire changed its Seebeck coefficient by up to 5 V · °C^–1. The consequences of both processes for thermocouple pyrometry are presented.     

Thermal accommodation coefficient of gases on controlled solid surfaces: Argon-tungsten system

The knowledge of the thermal accommodation coefficient for gases on well-controlled surfaces as a function of temperature is imperative to understanding the mechanism of interphase heat transfer on the microscopic level. With this goal in view, a heat transfer column instrument is designed, fabricated, assembled, and tested for the specific case a argon—tungsten system. With 99.9999%, pure argon, six sets of data are taken in the rarefied gas region in the maximum temperature range of 500–1500 K. Four sets of these measurements are in the temperature-jump region and are analyzed by the constant-power method to compute the thermal accommodation coefficient of argon on a controlled tungsten surface. The other two sets are taken under free-molecular flow conditions and are interpreted in accordance with the man-free-path kinetic theory for the low-pressure regime. These data are compared and discussed in the context of reported data in the literature and interpreted in the light of the surface condition and finish of the tungsten wire.Nomenclature A area of the solid surface - C _j constants in Eq. (3); j=0, 1, 2, 3, and 4 - E _i incident energy flux - E _r reflected energy flux - E _s reflected energy flux when the interaction between the gas and the solid atoms is complete - g temperature-jump distance - L half-length of the metal wire - M molecular weight of the gas - P gas pressure - Q _H total thermal energy conducted by the gas per unit time from the hot surface - Q_KT total thermal energy conducted by the gas per unit time if the striking gas molecules were to attain thermal equilibrium with the hot surface - R molar gas constant - r radial coordinate - r _f radius of the hot wire - S sticking coefficient - S_o initial sticking coefficient - T temperature - T _e linearly extrapolated gas temperature on the hot-wire surface - T _g temperature of the impinging gas molecules - T _H temperature of the hot surface - T _i temperature of the incident gas stream - T _r temperature of the gas molecules receding after collision with the solid surface - T _s temperature of the solid surface Greek Symbols thermal accommodation coefficient for the gas—solid surface - resistivity of the metal wire - gas coverage on the solid surface For an explanation of symbols, see Nomenclature.     

人群头发元素分布及某些特征研究

本文介绍用堆中子活化分析法测定人群头发中I、Br、Mg、Mn、Cu、Na、V、Cl、Al、Ca、S等11种元素。研究人发中元素分布特征、相关性特征、性别年令分布特征。方法学中还从法庭科学应用角度介绍同一性识别中差异率和重合几率的双判据方法。     

Electrochemical investigation of the iron-containing and no iron-containing AB5-type negative electrodes

The electrochemical behaviour of LaNi_3.55Mn_0.4Al_0.3Co_0.75−xFe_x (x = 0, 0.15, 0.55, 0.75) intermetallic compounds has been studied and presented [C. Khaldi, H. Mathlouthi, J. Lamloumi, A. Percheron-Guégan, Int. J. Hydrogen Energy 29 (2004) 307–311; C. Khaldi, H. Mathlouthi, J. Lamloumi, A. Percheron-Guégan, J. Alloys Compd. 360 (2003) 266–271; C. Khaldi, H. Mathlouthi, J. Lamloumi, A. Percheron-Guégan, J. Alloys Compd. 384 (2004) 249–253]. It has been deduced that the LaNi_3.55Mn_0.4Al_0.3Co_0.4Fe_0.35 compound has interesting electrochemical properties. In this paper we present the electrochemical study of LaNi_3.55Mn_0.4Al_0.3Co_0.4Fe_0.35 compound properties compared with the parent LaNi_3.55Mn_0.4Al_0.3Co_0.75 compound. Several techniques, such as, the chronopotentiometry, the constant potential discharge (CPD), the cyclic voltammetry (CV) and the linear polarization (LP) were applied to characterize these electrochemical properties. The electrochemical discharge capacity of the LaNi_3.55Mn_0.4Al_0.3Co_0.75 alloy increases to reach 294 mAh g⁻¹ after few cycles only (five cycles). However, the activation of the LaNi_3.55Mn_0.4Al_0.3Co_0.4Fe_0.35 alloy takes more than 20 cycles to be achieved and the obtained maximum discharge capacity is 194 mAh g⁻¹. The hydrogen diffusion coefficient D_H was determined by constant potential discharge and cyclic voltammetry techniques. The obtained values of the LaNi_3.55Mn_0.4Al_0.3Co_0.75 and LaNi_3.55Mn_0.4Al_0.3Co_0.4Fe_0.35 compounds are 6.29 × 10⁻¹¹ and 7.62 × 10⁻¹¹, and 2 × 10⁻⁸ and 7.5 × 10⁻⁸ cm² s⁻¹ by CPD and CV techniques, respectively. The exchange current density values, determined by a linear polarization technique, are 44 and 27 mA g⁻¹, respectively, for LaNi_3.55Mn_0.4Al_0.3Co_0.75 and LaNi_3.55Mn_0.4Al_0.3Co_0.4Fe_0.35 alloys.     

Design of a low temperature coefficient bandgap reference with a wide temperature range

In order to meet the requirements of different applications and markets for the accuracy and reliability of IoT chips,a low temperature coefficient bandgap reference with a wide temperature range is proposed.On the basis of the traditional Banba bandgap reference structure,the circuit utilizes high-order temperature compensation technology and piecewise temperature compensation technology to improve the curvature of the output reference voltage.The temperature coefficient of the circuit is reduced.At the same time,the operating temperature range of the circuit is extended.The circuit performances are verified in the TSMC 180 nm CMOS process.Test results show that the temperature coefficient of the circuit is as low as 7.2×10^-6/℃ in the range of-40 ℃ to 160 ℃.The power supply rejection ratio at a low frequency is -48.52 dB.The static current under the 1.8 V power supply voltage is 68.38 μA,and the core area of the chip is 0.025 mm².     

西南山区交通工程弃渣的工程特性评价及其分类

山区交通工程弃渣力学参数的准确测定,一直是弃渣场边坡稳定性评价面临的基础科学问题。在山区交通工程弃渣场运行特点和弃渣固体废弃物特征认知的基础上,探讨弃渣取样和试验代表性问题的物理根源,依托实际工程累计数据尝试提出简单实用的弃渣工程特性评价和分类方法。结果表明:①常规交通工程弃渣的密度、颗粒分析和强度试验,由于弃渣的粒径范围差异大、颗粒空间分布不均、弃渣来源复杂等固体废弃物特征造成取样和试验代表性难题; 用多阶段坡角测量和颗粒分析试验代替传统的弃渣边坡试验,解决了试验和取样代表性难题。②利用弃渣粗细比可将弃渣分为细粒弃渣、混合型弃渣和粗粒弃渣。③根据弃渣粗细比、天然休止角和整形坡率,将西南山区交通工程弃渣分为细粒弃渣、混合型弃渣和粗粒弃渣等3类。细粒弃渣,弃渣粗细比小于0.3,天然休止角小于31.5°,整形坡率为1.00:2.00; 混合型弃渣,弃渣粗细比为0.3～1.0,天然休止角为31.5°～39.5°,整形坡率为1.00:2.00～1.00:1.50; 粗粒弃渣,弃渣粗细比大于1.0,天然休止角大于39.5°,整形坡率为1.00:1.50。④用多阶段坡角测量、颗粒分析试验和无黏性土边坡稳定性系数计算公式代替传统的弃渣边坡试验和稳定性系数计算方法,方法简单,结果保守,可以作为弃渣边坡稳定性评价和安全控制技术的有益补充。     

基于BC聚类的差分隐私保护推荐算法

为提高差分隐私保护下推荐算法的准确性,提出了一种考虑差分隐私保护的基于Bhattacharyya系数（BC）的聚类推荐算法.以BC作为项目相似性度量的标准,根据BC相似性对项目进行K-medoids聚类,并在聚类簇中进行私有项目邻居选择.最后,根据最近邻居集信息,对用户的评分进行预测和Top-n推荐.提出的方案有效地克服了已有方法中存在的相似性度量依赖于共同评分的问题,提高了相似性度量的准确性,有效避免了因隐私保护而造成的最近邻居集质量下降的问题.理论分析和实验测试的结果表明,该方法在实现隐私保护的同时还能有效保证推荐的高质量,较好地实现了隐私保护和数据效用之间的平衡,具有良好的应用潜力.     

振荡翼改进运动模型的能量捕获性能分析

为了提高振荡水翼的水动力性能和能量捕获效率,基于传统简谐运动模型提出改进运动模型,通过引入俯仰运动系数k,推导改进后俯仰运动规律的一般形式,利用Fluent软件建立水翼的二维模型,综合分析半主动振荡模型下不同俯仰运动系数、折算频率和俯仰振幅等运动参数对水翼能量捕获性能的影响。结果表明:与传统简谐运动模型相比,改进运动模型能够使水翼升力系数在较长时间段内维持较大数值,提高水翼的升力系数和捕能效率;在相同的折算频率和俯仰振幅下,减小俯仰运动系数会增大俯仰角转动的角速度,进而增大俯仰运动所消耗的能量;不同俯仰振幅下对应不同的最优折算频率,折算频率越低水翼的捕能性能越不稳定,俯仰振幅越大,转动俯仰角所消耗的能量越多。在给定参数条件下,水翼的能量转化效率可超过40%。