基于VB的球面网壳施工控制系统设计

根据球面网壳的施工特点,采用VB6.0编制了球面网壳施工控制系统。根据系统的数据特点,采用MicrosoftExcel作为数据库。使用OLE控件调用AutoCAD软件,绘制三维结构模型图。使用Image控件和Line控件设计工具栏。系统根据施工误差对施工时可能出现的问题进行预警,有利于提高球面网壳的施工质量。     

Decentralized weighted control for a class of large‐scale systems with multi‐modes

In this paper, the control synthesis problem for a class of large‐scale systems with multi‐modes that are called large‐scale switched systems is addressed. By introducing the concept of decentralized switching signal and the relevant decentralized average dwell time, the asymptotic stability and weighted ?₂ gain performance are investigated. It should be noted that the decentralized switching covers general switching cases for large‐scale switched systems, namely, it admits both time‐dependent switching signal and arbitrary switching signal blended in the decentralized switching. Then, on the basis of the analysis results, the decentralized weighted control scheme including state feedback controller gains and switching signals is studied. Several design algorithms are proposed to meet different controller design problems. Finally, numerical examples are provided to illustrate theoretical findings within this paper. Copyright © 2013 John Wiley & Sons, Ltd.     

Experiments of a prototype wind-driven reverse osmosis desalination system with feedback control

A prototype wind-powered reverse osmosis desalination system was constructed and tested on Coconut Island off the northern coast of Oahu, Hawaii, for brackish water desalination. The system has four major subsystems: a multi-vaned windmill/pump, a flow/pressure stabilizer, a reverse osmosis module, and a control mechanism. The feedback control mechanism, developed by this study, allowed this prototype system to be operated satisfactorily under mild ambient wind of 5 m/s or less. No auxiliary power source was needed. The system operational data showed that at an average wind speed of 5 m/s, brackish feedwater at a total dissolved solids concentration of 3000 mg/1 and at a flow rate of 13 1/min could be processed by this system. The average rejection rate of this prototype system was 97% and the average recovery ratio was 20%. The energy efficiency of the system was measured at 3 5%, which is comparable to the typical energy efficiency of well-operated multi-vaned windmills. Generally, the system's energy efficiency decreases as wind speed increases.     

可监控EXE进程的Windows服务程序设计

EXE进程一旦意外停止,将给应用带来严重后果。该文基于微软的基础平台开发库设计了一个Windows服务程序,该服务程序在机器启动时自动运行指定EXE进程,在服务程序工作线程组中监控EXE进程运行状态,自动重启已停止进程,此服务程序可实现一个或多个EXE进程不间断运行。     

工业酚水稀释的RBF神经网络预测控制

针对酚水稀释过程中酚水流量不便测量的工程情况,提出了一种基于RBF（径向基）神经网络的预测控制方法.在酚水罐每个液位变化周期内使用计算机定时测量液位高度,并将这些高度值作为目标输出,在每个循环结束时训练RBF网络,利用RBF网络的逼近能力来实时预测酚水流量,从而控制清水的配比,实现酚水质量浓度的稳定.该方法可避免测量误差带来的干扰,提高控制精度.     

Discrimination for ablative control mechanism in solid-propellant rocket nozzle

The ablation in solid-propellant rocket nozzle is a coupling process resulted by chemistry, heat and mass transfer. Based on the heat and mass transfer theory, the aero-thermo-dynamic, and thermo-chemical kinetics, the thermal-chemical ablation model is established. Simulations are completed on the heat flow field and chemical ablation in the nozzle with different concentrations, frequency factors and activation energy of H2. The calculation results show that the concentration and the activation energy of H...     

运动汽车图像静态视点平滑特征优化仿真

由于运动汽车图像在特征采集过程中,汽车处于高速运动状态,采集的过程无法与汽车完全同步,造成汽车的特征像素分量在高速运动中丢失,产生较大的像素运动噪声,使得汽车图像边缘高频特征因为运动干扰而模糊.传统的平滑过渡方法在对运动汽车图像进行平滑处理时,按照图像中像元灰度值计算突变特性,但受到像素丢失与噪声无法抑制的影响,无法解决运动汽车图像高频分量对图像像元灰度值的干扰问题.提出基于替身运动DR算法的运动汽车图像静态视点平滑过渡方法,用替身像素描述汽车在场景中的运动特征,替身像素在场景中运动并同其它汽车的替身进行交互,采用局部化的车辆模型提高运动汽车场景的逼真度,通过依据替身运动的平滑过渡算法完成归一化线性运动汽车图像静态视点的平滑过渡,解决了运动汽车图像的平滑过渡问题.实验结果说明,所提方法可确保运动汽车图像边缘锐化,有效处理平滑噪声和锐化边缘.     

Changes in liquid hold-up in foam and size of foam by perforated plates and contribution to mechanical foam-breaking

Changes in the liquid hold-up, ?, and the diameter of d, of a foam that are induced by perforated plates (PPs) and the contribution of PPs to foam-breaking were studied. A foaming system containing a dilute detergent solution in a column with mechanical agitation fitted with a rotating-disk foam-breaker (MFRD) was used. After the foam passed through the PPs, ? and d decreased and increased, respectively. The use of PPs to achieve a maximum reduction in ? and a maximum increase in d is confirmed. It is also demonstrated that use of PPs contributes not only to improving the foam-breaking performance of the MFRD, but also to power savings.     

风机冷风保安控制系统优化

介绍菜钢型钢AV80风机冷风保安控制系统的优化改造,以增加其控制安全性及可靠性.