关于传统与现代设计理念的思考

中国传统的思维方式深深地影响了中国传统陶瓷艺术设计，中国传统陶瓷艺术设计的历史脉络清晰，深入到设计思维系统的深层，才有助于我们对当前的陶瓷设计作出有效的转化。现代陶瓷设计的观念是对传统陶瓷文化的延续和发展，深入挖掘传统思维方式的源头活水，才是发展中国现代陶瓷设计的关键。     

垂直定向液晶光阀及光电特性的研究

系统地讨论了排列相畸变模式液晶光阀结构，原理和制作，结合实际测试对其等效电路和电学匹配进行了分析，详细讨论了它的光电特性及相互关系，实测的液晶垂直排列方式工作的液晶光阀性能指标为，分辨率大于５０ｌｐ／ｍｍ，白光输入灵敏度为６．７７μＷ／ｃｍ＾２，响应时间为２００ｍｓ／３００ｍｓ，白光输出对比度为２００：１。     

Optically tuned superconductive-dielectric resonators with whispering-gallery modes

An analytical method is presented for calculating the resonant frequency andQ-factor of a superconducting dielectric disk resonator operating in millimeter-wave regime with whispering-gallery mode. Resonant frequency shift due to the optical generation of quasi-particles in superconducting film is investigated as a function of photon flux. An optically tunable resonant frequency of about 500 MHz is estimated, and good agreement is found between numerical results and experimental ones.     

注入种子CuBr激光器中的光谱控制

报道了采用注入种子方法．对ＣｕＢｒ激光器进行激光模式控制的实验结果。实现了单纵模ＣｕＢｒ激光脉冲的注入放大，获得了功率为１００ｍＷ水平的窄线宽铜激光辐射．在理论上分析了短脉冲高增益激光器中注入种子过程，讨论了在注入种子ＣｕＢｒ激光器中进行光谱控制的实验结果．     

话音ATM交换的实现─—ATM论坛电路仿真系列建议

近年来，随着ATM主干网络的建设和发展，研究ATM对现有通信业务的支持方式和适配技术是目前ATM技术研究的热点之一。话音ATM交换在降低话音通信成本和简化网络操作环境等方面提供了大量的技术手段，并且支持在单一网络环境中的多种综合业务传输。ATM论坛制定了电路仿真系列建议，话音ATM交换的技术已经基本成熟。文章通过对话音ATM交换在实现和优化方面的技术进行分析，并提出一种基于NativeModeATM的话音通信方式。     

布喇格光纤光栅反射特性及制作的理论研究

在对光纤光栅折射率分布进行合理假设的基础上,运用耦合模理论计算了光纤光栅的反射特性,对其反射特性与相关参数的关系进行了分析,并且还推导出了用相位掩模法制造光纤光栅的理论根据,得到了一些有益于光纤光栅制造的结论和有用公式。     

基于约束的设备维修方式选择

企业选择合理的设备维修方式，对提高企业竞争力及企业经济效益有重要影响。将约束理论应用于设备维修方式选择中，分析设备系统约束的特征，识别设备系统约束，区分关键设备与非关键设备部分，并对2个中分分别选择不同的维修方式及组合，可在改善设备系统输出效率同时提高维修的效用。通过实例分析，指明约束理论在设备维修方式选择中的实际应用步骤与程序。这为约束理论在设备管理中的进一步应用提供一个参考。     

A Novel Method Of Transport Barrier Formation

A novel technique is proposed for creating transport barriers by the rf waves. This is that the transport barriers can be created by the rf induced ponderomotive force itself and no rf induced flow shear generation is necessary. It is demonstrated that the ponderomotive force of the rf waves can stabilize the ion temperature gradient (ITG) mode, considered nowadays as the dominant source of anomalous energy losses in the low confinement (L) mode. It is also shown that this stabilization can be achieved for rather modest values of the rf power and hence should be easily obtained in actual experiments.      

Decisive arrival law parameters and a general finite capacity queueing problem

This paper addresses the problem of finding the parameters of the arrival law which most significantly influence expected occupation and loss of a finite capacity queue. The input process is supposed to be ergodic and wide sense stationary. We show that it is mostly possible to fit an MMPP(2) to the decisive parameters of observational data. Numerical examples illustrate the importance of the decisive parameters, called key parameters, and also show the accuracy of the proposed fitting procedure. Finally, in the appendix we present the solution of the finite capacity queueing problem with Special Semi Markov Process (SSMP) arrivals and a general service strategy.