新型高性能脉冲峰值保持电路

本文介绍了两种新型跨导型脉冲峰值保持器，分别用于多丝正比室（ＭＷＰＣ）和复合晶体闪烁探测器（Ｐｈｏｓｗｉｃｈ）输出脉冲信号的形状和幅度分析。电路的跨导放大级采用跨导型集成运算放大器，使电路结构简单化，且性能优良可靠，能响应输入脉冲最小上升时间分别为５０ｎｓ（Ｐｈｏｓｗｉｃｈ）和５００ｎｓ（ＭＷＰＣ）的信号，在４０ｄＢ的动态范围内，两电路的积分非线性均好于０．１％，特别适用于空间γ射线观测。     

Simultaneous solving of balancing and sequencing problems with station-dependent assembly times for mixed-model assembly lines

In spite of many studies, investigating balancing and sequencing problems in Mixed-Model Assembly Line (MMAL) individually, this paper solves them simultaneously aiming to minimize total utility work. A new Mixed-Integer Linear Programming (MILP) model is developed to provide the exact solution of the problem with station-dependent assembly times. Because of NP-hardness, a Simulated Annealing (SA) is applied and compared to the Co-evolutionary Genetic Algorithm (Co-GA) from the literature. To strengthen the search process, two main hypotheses, namely simultaneous search and feasible search, are developed contrasting Co-GA. Various parameters of SA are reviewed to calibrate the algorithm by means of Taguchi design of experiments. Numerical results statistically show the efficiency and effectiveness of the proposed SA in terms of both the quality of solution and the time of achieving the best solution. Finally, the contribution of each hypothesis in this superiority is analyzed.     

Recommending suitable learning scenarios according to learners’ preferences: An improved swarm based approach

The paper presents a new approach for recommending suitable learning paths for different learners groups. Selection of the learning path is considered as recommendations to choosing and combining the sequences of learning objects (LOs) according to learners’ preferences. Learning path can be selected by applying artificial intelligence techniques, e.g. a swarm intelligence model. If we modify and/or change some LOs in the learning path, we should rearrange the alignment of new and old LOs and reallocate pheromones to achieve effective learning recommendations. To solve this problem, a new method based on the ant colony optimisation algorithm and adaptation of the solution to the changing optimum is proposed. A simulation process with a dynamic change of learning paths when new LOs are inserted was chosen to verify the method proposed. The paper contributes with the following new developments: (1) an approach of dynamic learning paths selection based on swarm intelligence, and (2) a modified ant colony optimisation algorithm for learning paths selection. The elaborated approach effectively assist learners by helping them to reach most suitable LOs according to their preferences, and tutors – by helping them to monitor, refine, and improve e-learning modules and courses according to the learners’ behaviour.     

重介洗煤密度自控系统研究

目的：本文介绍了PLC在洗煤厂的介质密度控制中的应用,针对介质密度变化规律性不强,大滞后等特点作出调整。方法：采用VB编程语言结合专家算法的方针,提出了一个解决方案,提高了控制密度精度。结果：使物料浓度配比更加合理,趋势变化更容易让现场人员接受。结论：提高了产煤精度及生产效率,节约了能源的同时为洗煤厂创造更大的经济回报。     

改进的APRIORI算法在试卷系统数据挖掘中的应用

本文通过对数据挖掘技术的研究,采用关联规则法对学生答题数据进行分析,并在关联规则使用中采用改进型的Apriori算法进行运算,构建高频集,并对于高分学生和低分学生的试卷进行了加权处理,使得高频集中的试题在知识点和难度上的关联更加突出,便于在自动组卷时更科学地评价试卷.     

标准模型下群签名的批验证协议*

首次对标准模型下群签名的批验证协议进行了研究。利用小指数测试技术和双线性对映射的特殊性质,为目前效率较高的两个群签名方案按照多人签署相同消息和不同消息这两种情况,分别设计了相应的批验证协议。相较于单独验证,认证效率大大提高。     

一种高效的网格资源监测算法ACTC的改进算法

资源监控是网格计算的关键组成部分。资源监控算法既要保证网格系统中资源信息高保真度又要考虑资源信息在网络传输中的负担最低。ACTC算法就是为实现以上目的而被提出,但是算法中对资源信息更新量的动态门槛值(d_threshold)计算方式不合理,有可能导致算法演变成低级的单纯依靠时间敏感机制(TSM)来发送资源更新通知,并且算法中遗漏了一些极端情况的考虑。提出了新的d_threshold计算公式和限制条件,进行性能改进和完善,并对改进前后两算法进行实验对比。实验表明,改进后算法提高了资源信息准确性,并使监控系统     

考试综合管理信息系统的关键技术研究

基于.NET技术成功开发了考试综合管理信息系统,针对考试管理工作面临的问题,提出了相应的解决方案,并以此为依据介绍了该系统开发过程中的自动编排算法、安全策略等关键技术。该系统已成功运用,并解决了高校日益复杂的考务管理工作。     

双向搜索多约束路由启发式计算方法

为提高大型通信网络中搜索满足多约束条件路由的速度,提出一种双向搜索路由的计算方法.首先从源和目的节点同时出发,计算到达各中间节点的可达路径.然后在各可达路径中进行路径的筛选.可达路径是采用邻接矩阵变换方式获得的,筛选路径是根据非线性开销函数,采用启发方式择优选取.当两方向搜索的节点数累计达到n-2后,对接合并两方向到达中间节点的路径,从中再选择最佳路径作为路由输出.通过算例详细介绍了可达路径计算及启发式选优方法.阐述了算法的正确性及特点,分析了最大时间杂性.通过仿真实验评估,不仅更进一步验证了新算法的正确性,而且表明新算法在搜索路由速度上要优于其他算法.     

基于Morlet小波变换和改进遗传算法的动态识别

如何合理地识别大型复杂结构的动力参数一直是工程领域关心的问题.为此,以Morlet小波变换和采用单亲遗传算子的改进遗传算法为基础,构造一结构动态参数识别模型.并且以C++为平台,通过计算机内部命令调用ANSYS等软件,实现识别模型的程序化.通过模拟算例计算,计算结果与理论值一致.同时,结合一水电站厂房现场振动试验,对该大型结构进行动态参数识别,识别结果与工程经验值基本吻合.