FY-3气象卫星MERSI数据快速预处理的IDL实现

作为新型卫星数据源,FY\|3/MERSI(风云三号中分辨率光谱成像仪)影像的快速预处理方法与模块目前较少见。采用基于三角网的几何校正算法,根据研究区Shapefile文件和FY\|3/MERSI自带定位数据提取处理区域,实现对应区域全部20个通道几何校正,并利用后向映射重采样输出各通道图像纠正后像元点DN值,随后进行辐射定标、太阳高度角订正等预处理。该系列过程用IDL编写相关程序实现了用户界面化交互操作。运行结果表明:设计的算法流程占用内存小,计算速度快。对于一个面积约45万km²的区域,所有通道处理耗时仅450 s,且校正后影像质量和精度均较好。相较于相同区域借助ENVI软件下地理位置查找表法(GLT)仅实现单通道几何校正耗时超30 min,本文开发的模块大大提高了FY\|3/MERSI数据处理效率,为其在城市热环境、积雪等领域的应用做好准备工作。     

基于横纵向联合控制的多目标优化车辆跟驰研究

为解决车辆在拥堵环境中因车速波动较大所带来的跟驰平稳性较差、跟踪无效或不安全等问题,提出了基于车辆模型和深度强化学习的多目标优化跟驰方案。首先基于车辆横纵向动力学建立车辆跟驰模型,然后根据车间距误差、速度误差、横向偏差及相对偏航角等,利用深度确定性策略梯度算法得到跟驰车的加速度和转向角,以更平稳安全地控制跟驰车辆。经NGSIM公开驾驶数据集进行测试与验证,该方案可有效地提升跟驰车辆的稳定、舒适与安全性,对保证交通安全和提升道路通行能力具有重要意义。     

A novel deep learning scheme for multi-condition remaining useful life prediction of rolling element bearings

The remaining useful life (RUL) prediction of a rolling element bearing is important for more reasonable maintenance of machinery and equipment. Generally, the information of a failure can hardly be acquired in advance while running and the degradation process varies in terms of different faults. Thus, fault identification is indispensable for a multi-condition RUL prediction, where, however, the fault identification and RUL prediction are separated in most studies. A new hybrid scheme is proposed in this paper for the multi-condition RUL prediction of rolling element bearings. The proposed scheme contains both classification and regression, where the 2D-DCNN based classifier and predictors are built concerning typical fault conditions of a bearing. For the online prediction, the raw signals are spanned in the time-frequency domain and then transferred into images as the input of the scheme. The classifier is used to monitor the vibration of rolling bearings for online fault recognition and excite the corresponding predictor for RUL prediction once a fault is detected. The output from the predictor is amended by the proposed adaptive delay correction method as the final prediction results. A demonstration is performed based on the XJTU-SY datasets and the results are compared with those from the state-of-the-art methods, which proves the superiority of the proposed scheme in improving the accuracy and linearity of RUL prediction. The time cost of the proposed online prediction scheme is also investigated and the results indicate high time effectiveness.     

Response correction techniques for surrogate‐based design optimization of microwave structures

Simulation‐based optimization has become an important design tool in microwave engineering. However, using electromagnetic (EM) solvers in the design process is a challenging task, primarily due to a high‐computational cost of an accurate EM simulation. In this article, we present a review of EM‐based design optimization techniques exploiting response‐corrected physically based low‐fidelity models. The surrogate models created through such a correction can be used to yield a reasonable approximation of the optimal design of the computationally expensive structure under consideration (high‐fidelity model). Several approaches using this idea are reviewed including output space mapping, manifold mapping, adaptive response correction, and shape‐preserving response prediction. A common feature of these methods is that they are easy to implement and computationally efficient. Application examples are provided. © 2011 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2012.     

一种制做三维牙——颌骨光弹性模型的新方法

本文提出一种用“整体浇注法”制做三维牙——颌骨光弹性模型的新方法,即用价格便宜的石膏做阴模,先制出与真实牙几何相似的牙光弹性模型和模拟牙周膜的乳胶套,将它们粘接好,然后将其放入颌骨石膏阴模的适当位置,浇入环氧树脂混合液,用“二次固化法”进行固化,即可制成三维牙——颌骨整体光弹性模型。此法能保证模型与实物的严格几何相似和牙周的边界条件相似,使实验精度大大提高且工艺简单、成本低。     

Simulation of smoke flow and longitudinal ventilation in tunnel fire

1 Introduction The tunnel is one of the important facilities of railroad and highway transportation, and also a throat of railroad and highway. With the development of transportation, there are more and more tunnels. Although the tunnel fire occurs seldo…     

Edge diffraction correction for 3D scattering center modeling based on the shooting and bouncing ray technique

In the traditional scattering center extraction method based on the shooting and bouncing ray(SBR) technique,only the physical optics contribution of the target is considered.However,the physical optics method is unable to describe the contribution of the actual edge diffraction.By comprehensively considering the specular reflection and edge diffraction contribution of the target,an edge diffraction correction method for 3D scattering center modeling based on the SBR technique is proposed.Using the SBR technique and combining the image domain ray tube integration and equivalent edge currents method,the edge diffraction correcting formula for the 3D inverse synthetic aperture radar image is derived.Simulation results show that the proposed method is able to effectively improve the modeling accuracy of the 3D scattering center.     

基于门控循环单元与误差修正的短期负荷预测

针对负荷预测模型迭代训练过程中存在误差积累的问题,提出结合叠式双向门控循环单元（SBiGRU）、完整自适应噪声集成经验模态分解（CEEMDAN）和误差修正的组合预测模型. 建立SBiGRU模型学习在气温、日期类型影响下负荷序列的时序特征,误差特征体现在SBiGRU模型预测产生的误差序列中;使用CEEMDAN算法将误差序列分解为数个本征模态函数（IMF）分量与趋势分量,对每项分量再次建立SBiGRU模型进行学习与预测,并对各分量的预测值进行序列重构,得到误差的预测结果;对预测结果进行求和以修正误差. 模型评估结果表明,组合模型的预测准确精度为98.86%,与SBiGRU、BiRNN、支持向量回归等方法相比,该模型具有更好的精度.     

A novel arc welding inverter with unit power factor based on DSP control

A novel inverter power source is developed characterized with constant output current and unit power factor input. Digital signal processor （ DSP ） is used to realize power factor correction and control of back-stage inverter bridge of the arc welding inverter. The fore-stage adopts double closed loop proportion and integration （PI） rectifier technique and the back- stage adopts digital pulse width modulation （ PWM） technique. Simulated waves can be obtained in Matlab/Simulink and validated by experiments. Experiments of the prototype showed that the total harmonic distortion （THD） can be controlled within 10% and the power factor is approximate to 1.     

单级单开关不连续导电模式功率因数校正电路新方案

分析了几种单级单开关不连续导电、带输出电压隔离的功率因数校正电路，分别讨论了其优缺点，并提出了一种新的功率因数校正电路。