卸荷裂隙在水利水电工程建设中的危害

卸荷裂隙是对水工建筑物稳定最不利的软弱结构面之一。文中较系统地介绍了这种结构面的特点、分布规律、形成的力学机理、对工程的危害、勘查方法及处理措施。     

Na_2O－Al_2O_3－SiO_2系统霞石微晶玻璃机械强度的研究

霞石微晶玻璃是一种高强度的新型无机非金属材料．本文以Ｎａ２Ｏ－Ａｌ２Ｏ３－ＳｉＯ２系统为基础，引入晶核剂和复合澄清剂，经高温熔制和两步热处理制备的霞石微晶玻璃，具有较高的抗压和抗折强度．结果表明，霞石微晶玻璃的机械强度与霞石晶体及试样的结构有关，也与微晶化热处理的时间有关。     

液态金属钠高温沸腾实验回路应力分析与强度计算

本文主要完成了液态金属钠高温沸腾实验回路的应力分析与计算，确定了回路高温区连接管系的布置型式和支吊架系统，是该回路总体设计的重要组成部分。     

利用贫软锰矿制备锰盐的研究

用二氧化硫法处理贫软锰矿，得到含硫酸锰和连二硫酸锰的溶液，继而将该溶液进行净化，除杂，浓缩，结晶处理即得工业级硫酸锰，结晶母液用碳铵沉淀即得碳酸锰产品     

以应力分析为基础的汽包封头强度计算

本文介绍应力分析设计法的原理，通过有限元计算得到汽包封头的温度场、应力场，并以应力分析为基础对汽包封头强度作了校核。     

PbO－Bi_2O_3－B_2O_3－SiO_2系重金属氧化物玻璃的结构与光学性

通过密度、可见光光谱、红外吸收光谱、Ｃｏ－６０辐照损伤试验及荧光光谱的测试，研究了ＰｂＯ－Ｂｉ２Ｏ３－Ｂ２Ｏ３－ＳｉＯ２玻璃系的光学性能与结构．密度最高可达８．４６４ｇ／ｃｍ３其紫外吸收达截止波长随Ｐｂ２＋及Ｂｉ３＋含量升高而红移．玻璃熔化温度低达８５０℃．在ＰｂＯ－Ｂｉ２Ｏ３－Ｂ２Ｏ３系玻璃中加人ＳｉＯ２可使玻璃结构更致密．室温下该系统玻璃在３６０ｎｍ有一个宽的激发峰，能产生４１８ｕｍ及４３８ｕｍ两个弱的发射峰．该系统玻璃的结构是由［ＳｉＯ４］４－、［ＢＯ３］３－、［ＢＯ４］５－、［ＰｂＯ４］６－及［ＢｉＯ６］９－构成．其中部分Ｐｂ２＋及Ｂｉ３＋以网络外体进入玻璃．     

激光与DNA作用系统的随机共振研究

建立了激光与ＤＮＡ分子系统相互作用的Ｆｏｋｋｅｒ－Ｐｌａｎｃｋ方程，通过对该方程的数值研究，发现在绝热近似下，系统发生随机共振，噪声强度，激光振幅和频率协同作用共同制约着生物系统的演化过程，噪声强度在生物系统遗传变异过程中可能起重要作用。     

The effect of fibre alignment on composite strength: II. The strength of angle-ply laminates

Experiments have been carried out on relatively wide angle-ply laminate samples with very short gauge lengths. These proved to be very much stronger than samples tested in earlier work, and which form the basis for our present design with these materials. It is highly likely that the early results for strength were more indicative of edge effects than true laminate strength. This is confirmed by data from tests on pressurized tubes. A review of the literature on this shows that such tests produced results which can be an order of magnitude higher than the early laminate tests. Thus our design calculations could well be severely underestimating the potential strength of angle-ply laminates. This may be having serious consequences for the aerospace industry, through the use of design criteria for strength which may be too conservative. Single-fibre experiments may pave the way for more realistic estimates of angle-ply laminate strengths. These indicate that a simple one-third power rule can be used to estimate the potential strength. However, this is purely ad hoc at present, and needs to be put on a firmer footing through both theoretical and experimental studies. Furthermore, if this approach is adopted, edge effects will still have to be allowed for, and estimated on the basis of the aspect ratio of the part.     

低温导热绝缘胶粘剂研究

一种低温导热绝胶粘剂用于氢氧发动机系统表面温度传感器的端封和胶接安装，介绍了胶粘剂的技术要求，研究方案及试验结果。以DW－3超低温胶粘剂为基础，经改性设计后，仍能保持胶粘剂原有的耐低温特性，而且其导热，绝缘等性能均能满足设计和使用要求。     

十万立方米储罐用高强钢SPV490Q的冬季焊接施工

通过对高强钢焊接性能的分析 ,提出了高强钢冬季焊接施工带来的问题及处理办法。可靠的焊前预热和焊后保温是确保冬季焊接施工质量的关键措施