离心式井下增压装置的系统设计

针对目前国内外超高压射流钻井技术采用柱塞式增压器普遍存在寿命短、工作可靠性差的问题,提出离心式井下增压装置的结构设计方案。这种增压装置由动力单元(涡轮动力机)、固液分离单元、增压单元(离心泵)和流道短节单元组成,通过钻井液驱动涡轮动力机旋转,并带动固液分离装置和离心泵高速旋转,使部分钻井液增压,达到提高射流压力和速度的目的。现场试验证明,这种离心式井下增压装置可使钻井液在井底的压力达到30MPa。     

Improvement of emission efficiency in polymer light-emitting devices based on phosphorescent polymers

We report improvement of emission efficiency in polymer light-emitting devices (PLEDs) employing phosphorescent polymers. A hole-blocking layer was inserted between the emissive layer and the cathode to enhance recombination efficiency for the injected holes and electrons. Aluminum(III)bis(2-methyl-8-quinolinato)4-phenylphenolato (BAlq) was used for the hole-blocking layer. The resultant PLEDs exhibited significant improvement of emission efficiency. The respective external quantum efficiencies for red, green and blue PLEDs were 6.6, 11 and 6.9%. These values are very high compared with those based on conventional fluorescent polymers.     

Preparation of micrometer‐sized,monodisperse, magnetic polymer particles

Micrometer‐sized, monodisperse, magnetic composite particles were prepared by heating micrometer‐sized, monodisperse, hollow polystyrene/polydivinylbenzene composite polymer particles at 200°C for 4 h (particles had been dipped in pentacarbonyliron) and then washed in 12 N HCl and water. The hollow polymer particles were produced by seeded polymerization by the dynamic swelling method that was proposed by authors. The magnetic composite particles contained Fe₃O₄, the content of which was 49% based on total weight, and were attracted easily in water by a 1650 G magnet. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 428–433, 2003     

膜分离法回收合成氨弛放气中氢气

介绍了膜分离的原理和应用。实践表明该方法具有效率高、流程简单、操作灵活容易、纯度高和收率高等优点。     

硫酸铵-氯化亚锡-孔雀绿体系浮选分离铂

研究了在盐酸介质中硫酸铵存在下氯化亚锡—孔雀绿—水体系浮选分离铂的方法。在最佳实验条件下，铂的浮选率可达100．0％，并与常见贱金属完全分离。     

采用注视控制器实现复杂运动的仿真

注视控制器是3DS MAX软件的众多控件之一，它能使多个物体彼此间产生运动约束。通过使用注视控制器功能，笔者成功制作出八足爬壁式仿生机械昆虫的运动场景动画，并使该仿生机械昆虫各足的行走动作符合机械零件作平面复杂运动时所应遵守的正确运动规律。由此证明，3DS MAX软件注视控制器对正确模拟特殊机械装置的复杂运动可产生极大作用。     

某难选铅锌矿石浮选分离新工艺试验研究

针对某难选铅锌矿的矿石性质，进行了较为系统的小型试验研究。结果表明：在铅循环中采用Bx SN—9^#组合捕收剂、石灰 ZL—01组合抑制剂，在锌循环中采用捕收剂磁处理浮选技术等措施，可以较好地解决该难选矿的浮选分离问题。     

浅谈电器故障的检修方法

以较简单的电机控制线路，介绍了电器故障的检修方法，并以广钢金石分公司生产的实例分析了继电器接触控制系统和PLC自动控制系统电器故障的检修过程，说明电器故障的消除必须走了解过程、查找、排除三个步骤。     

位置灵敏探测器数据采集的软件设计

介绍了一个基于Windows操作系统的数据采集软件，该软件用于使用重心法确定的位置信息的位置灵敏探测器，具有方便的人机交互界面，使用专用驱动程序采集数据。     

大功率速调管发射机水冷系统的设计

雷达发射机中大功率器件(如速调管)的强迫液体冷却是一种常用的冷却方式。本文根据某雷达发射机冷却系统的设计.介绍了大功率速调管发射机水冷系统的设计方法。