Borides at interfacial zone of IC6 TLP bonded joints

1　INTRODUCTIONTransientliquidphase (TLP)bondingtechniquehasbeensuccessfullyusedinjoiningheatresistantal loys ,likeHastelloyX ,Inconel713C ,In10 0 ,Udimet5 0 0 ,70 0 ,MarM 2 0 0 ,0 0 7,2 4 7,30 2 ,Rene′80 ,TD NiCr ,MA75 4,6 0 0 0 ,PWA14 2 2 ,CSMX 2etc ,whicharesusceptibletohotcrackingor post weldheat treatmentcrackingproblemsduringfusionweld ing[14 ] .Inaddition ,therewerereportsofjoiningNiAlandTiAlintermetallicsbyTLPbondingmethod[510 ] .Forexample ,Galehadinvestigatedthemic…     

LF6铝合金的超塑性和扩散连接的组合工艺

研究了ＬＦ６铝合金的超塑性和扩散连接组合工艺，试验结果表明；预先采用变形再结晶的方法细化材料的晶，并有效地去除铝合金的致密氧化膜，即可成功地实现铝合金的ＳＰＦ－ＤＢ组合工艺。利用电子探针从微观观察了扩散连接接头的界面扩散行为，并首次从机理上分析珥金属的超塑性和扩散连接两种工艺之间的内部联系。     

反向凝固与高温轧制过程中元素互扩散对复合界面的作用

在反向凝固与高温轧制过程中 ,母带与凝固层间一直进行着互扩散 ,C元素靠反应扩散由母带扩散到凝固层 ,Cr由凝固层扩散到母带 ,母带与凝固层之间存在明显的扩散层。Cr在母带中的扩散厚度约为 13μ。扩散到母带中的Cr和母带中的Fe形成固溶体 ,并析出Cr的碳化物。母带与凝固层界面实现了冶金结合     

Diffusion bonding between nickel-base superalloy K24 and heat-resisting steel 1Cr11Ni2W2MoV

IntroductionSLlperalloyandheat-resistingsteelarenowwidelyusedasstructurematerialsinaerospace,a\-lationalldshipbuildingindustries.Nickel-basesuperalloywasfirstlyrevealedasanengineeringmaterialduringtheearly1960swhenitwasrecognizedasbeingsuitableforllledium-temperaturegasturbinel'l.Now.nickel-basesuperalloyhasbeenpracticallyusedinhigheffectiveturbinestosatisfytheincreasingdemandsforhighertemperatureenvironmentsIZI.Insomeaerospaceengines,theimpellersshouldserveattemperatureof1000C~1100C,andala…     

Coloring effect of the organic hybrid of polyamide 6 and N,N′‐ethylene‐bis(tetrabromophthalimide)

Coloring study in organic hybrid of polyamide (PA6) and N,N′‐ethylene‐bis(tetrabromophthalimide) (EPT), where the chromophore was self‐assembled by hydrogen bonding formed between PA6 molecular chains and EPT compound, have been characterized by several techniques. CS930 double wavelength lamella scanner was employed to measure the change of color. The existence of hydrogen bonding in PA6/N‐N′‐ethylene‐bis (tetrabromophthalimide) (PA6EPT) was investigated with Fourier transform infrared (FTIR), the results of which were compared with that of PA6 with the same thermal history. FTIR spectra at room temperature revealed that there is essentially hydrogen bonding between PA6 and EPT. The crystallization behavior of PA6EPT affected by hydrogen bonding was studied by using FTIR. The temperature‐dependent behavior of both PA6 and PA6EPT was studied by temperature‐FTIR spectroscopy and differential scanning calorimetry (DSC). With temperature increasing, changes in sensitive, high‐resolution absorbance spectra are observed as dissolve‐volatilizing thin film. Temperature‐FTIR results showed that the hydrogen bonding in PA6EPT attenuated and dissociated considerably at a smaller rate than PA6, that is to say, hydrogen bonding in PA6EPT is more stable than that in PA6. DSC showed that the melting temperature of PA6EPT and PA6 are similar. However, the crystalline degree and crystalline temperature and melting enthalpy of PA6 and PA6EPT are different. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 594–600, 2007     

The Interlaminar Bond Strength of Flexible Polymer-Metal Laminates

An alternative test method to the traditional 180° “T” peel test has been developed for the measurement of interlaminar bonding in three-ply (polyester/aluminium/polypropylene) flexible-packaging, laminate materials. The new test is thought to involve mixed mode I (opening) and mode II (shearing) failure, and takes into account the yielding of the polypropylene layer during testing. The method allows more direct comparisons between materials to be made, and allows the measurement of strong bonds, where a peel test would result in yield or fracture of the substrate arms before debonding.     

Effect of cation exchange on the distribution and movement of cations in soils with variable charge. I. Effect of lime on potassium and magnesium exchange equilibria

The influence of Ca(OH)₂ on K and Mg exchange equilibria in three New Zealand soils was studied. Calcium hydroxide was mixed with each soil to raise the pH to about 6 or 7. For each Ca(OH)₂ treatment, K and Mg exchange isotherms were determined, from which the equilibrium activity ratios were derived. Exchange coefficients and solution activity ratios were calculated according to the Gapon convention.The addition of Ca(OH)₂ produced varying effects in the Gapon exchange coefficient for both K and Mg. The magnitude and direction of change in the exchange coefficient were related to the cation initially dominating the exchange sites, rate of Ca(OH)₂ addition, soil colloids contributing to the CEC and specific interactions of Ca with these soil colloids.Addition of Ca(OH)₂ reduced the equilibrium activity ratio of all soils. Changes in the bonding strength of K and Mg with increasing CEC were suggested as a possible mechanism for this decrease.     

Local orders,lattice distortions,and electronic structure dominated mechanical properties of (ZrHfTaM1M2)C (M = Nb,Ti, V)

High-entropy carbides (HECs) are regarded as potential candidate structural materials with attractive mechanical properties due to their ultra-high hardness. It is essential to reveal the atomic and electronic basis for strengthening mechanism in order to develop the advanced HECs. In the present work, C (M = Nb, Ti, V) are selected as case studies. The effects of transition metals (M) on the lattice parameters, bulk modulus, enthalpy of formation, electron work function (EWF), and bonding morphology/strength of HECs are comprehensively studied by first-principles calculations. It is found that the lattice parameters, equilibrium volumes, and bulk modulus of HECs are improved with the increase of M atomic volumes. The atomic-size differences among various groups of elements not only result in the lattice mismatch/distortion but also contribute to the formation of weak spots. In the view of bonding charge density, the electron redistributions caused by the coupling effect of the lattice distortion and valance electron differences can be revealed obviously, which identify the different bonding strength. Moreover, in terms of EWF, the proposed power-law-scaled hardness of HECs is validated and matches well with those reported theoretical and experimental results, providing a strategy to design advanced HECs with excellent mechanical properties.     

榫边扣合管状密闭输送带的制作及其质量优化

对用于制药、精细化工、建材业等输送松散及粉、粒物料不污染环境的榫边扣合管状密闭输送带的结构特点、技术要求、制造工艺和优化制品质量的技术措施及效果进行了实验探讨。     

应用轴功目标法合成低温分离序列

针对以乙烯深冷分离系统为代表的低温精馏过程合成问题。低温精馏系统包括精馏序列以及与之对应的换热网络和制冷系统。依据轴功目标方法,低温分离系统的能耗可以归结到制冷系统的轴功上,且过程的轴功消耗可以不经过换热网络和制冷系统的合成而直接得到。本文以轴功消耗作为优化目标建立数学模型,在模型中不包含换热网络和制冷系统结构的情况下建立精馏序列与对应轴功消耗的关系。这样,在不增加问题复杂程度的前提下实现对系统总能耗的优化。对乙烯冷端分离系统的合成的算例研究表明,通过基于轴功目标的数学模型可以高效的得到具有最低轴功消耗的精馏系统。