汽车悬架最优控制与半主动控制研究

基于1/4汽车悬架为控制对象,建立了汽车悬架动力学模型.以线性二次型最优（LQG）控制和改进后的半主动开关（on-off）控制为控制策略,在MATLAB/Simulink软件平台上进行仿真.与被动悬架比较,采用正弦激励下的频域分析和随机路面激励下的时域分析,证明了LQG控制和半主动开关控制在汽车控制工程中的可行性.     

一种通信指挥车的总体设计

从通信指挥车的使用特点出发,讨论了车厢结构设计和通信指挥系统的设计.在车厢设计中,重点对扩展方舱、功能区模块、机架标准化和人性化设计进行了阐述.在通信系统设计中,重点对系统集成、综合布线、电磁兼容设计等方面进行了讨论.     

Estimation of Vehicle Speed Based on Wheel Speeds from ASR System in Four-Wheel Drive Vehicles

Three major methods currently in the use of determining vehicle speed based on wheel speeds,the minimum wheel speed,minimum wheel speed corrected by slope method and the Kalman filter method,are analyzed,with merits and defects of each approach stated. Through simulations,the Kalman filter method based on minimum wheel speed shows improved accuracy,in addition to better adaptivity to vehicle reference speed. It also can be used to acceleration ship regulation (ASR) in part-time four-wheel drive vehicles.     

Study on Steering Control Strategy for High-Speed Tracked Vehicle with Hydrostatic Drive

Steering control strategy for high-speed tracked vehicle with hydrostatic drive is designed based on analyzing the fundamental steering theories of the hydrostatic drive tracked vehicle. The strategy is completed by the cooperation between integrated steering control unit and pump & motor displacement controller. The steering simulation is conducted by using Simulink of Matlab. It is indicated that this steering control strategy can reduce the average vehicle speed automatically to achieve the drivers expected steering radius exactly in the case of ensuring not exceeding the system pressure threshold and no sideslip.     

Low-Power Operational Amplifier for Real-Time Signal Processing System of Micro Air Vehicle

A low-power complementary metal oxide semiconductor(CMOS) operational amplifier (op-amp) for real-time signal processing of micro air vehicle (MAV) is designed in this paper. Traditional folded cascode architecture with positive channel metal oxide semiconductor(PMOS) differential input transistors and sub-threshold technology are applied under the low supply voltage. Simulation results show that this amplifier has significantly low power, while maintaining almost the same gain, bandwidth and other key performances. The power required is only 0.12mW, which is applicable to low-power and low-voltage real-time signal acquisition and processing system.     

Vehicle Dynamics Modeling and Simulation for ACC

A 7 degree-of-freedom (DOF) 4 wheels vehicle dynamics model based on Matlab-Simulink is established,and 7 DOF vehicle dynamics equations in the form of nonlinear state-space standards are given.The characters of the electronic throttle and the active braking system have been analyzed.And the electronic throttle model and the active braking system model are built according to the test results respectively.Off-line simulation results indicate that the model is suitable for the vehicle adaptive cruise control ...     

Robust parametric approach for tracking control of an air-breathing hypersonic cruise vehicle

To realize the stabilization and the tracking of flight control for an air-breathing hypersonic cruise vehicle, the linearization of the longitudinal model under trimmed cruise condition is processed firstly. Furthermore, the flight control problem is formulated as a robust model tracking control problem. And then, based on the robust parametric approach, eigenstructure assignment and reference model tracking theory, a parametric optimization method for robust controller design is presented. The simulation results show the effectiveness of the proposed approach.     

基于自适应滑模控制的智能车车道保持分析

针对目前智能车车道保持控制算法对参数摄动适应性不足的问题,提出一种基于模糊自适应调节的滑模控制方法。在建立车辆线性二自由度动力学模型的基础上,采用滑模变结构控制来提高车道保持控制器对参数摄动和未建模动态的适应性;利用模糊控制自适应调节滑模面的切换增益,降低控制抖振。仿真分析表明,提出的方法不仅能够显著降低传统滑模变结构控制器的抖振,而且对参数摄动和未建模动态具有较高的鲁棒性和适应性。     

基于视觉导航的智能小车调速控制器设计

智能小车控制是构建智能车路系统中汽车列队行驶模拟系统的基础。针对智能小车自主寻迹问题,通过对寻迹路径的偏差及偏差的导数进行模态划分,提出对应的模糊控制规则,进而以DSP TMS320F2812为主控芯片控制智能小车电机的转速,实现智能小车纵向自主控制。模型车运行实验表明智能小车速度调节算法可行。     

重型车辆双路制动液压系统性能仿真

对重型车辆电液伺服控制双路制动器系统进行了分析与设计。采用电液伺服控制的双联制动阀控制双腔制动油缸的双路制动方案,实现车辆的行车制动和紧急制动。通过分析制动器系统各组成模块和连接管路对制动性能的影响,建立了制动器系统的非线性数学模型。应用MATLAB/Simulink对系统的双路行车制动性能进行了仿真研究,验证了设计方案的合理性。台架试验表明:所设计的制动器液压系统的性能达到了设计要求。