强度调制型光纤传感器信号补偿技术的现状与应用

简要地介绍了强度调制光纤传感器的特点,着重分析和比较目前国内外五种有代表性的强度调制型光纤传感器信号补偿方法及其应用状况.     

差动光栅在精密测试中的应用

提出差动光栅概念,举例说明差动光栅在光纤面板刀口响应测试和材料形变自动监测系统等精密测试中的应用。     

Frequency response function of magnetic bearings using high-temperature superconductor

A high-temperature superconductor YBa₂Cu₃O_7-x with strong pinning force has allowed stable magnetic suspension with no control to be developed. Two types of superconducting magnetic bearings (SMB) using YBCO and permanent magnet were assembled. The two types are radial and axial. The dynamic stiffness of each SMB as it was cooled down under a magnetic field by liquid nitrogen was measured both radially and axially. As a result, it was found that the spring constants of these SMBs were almost as large as a practically desirable value; however, their damping coefficients were lower than the practical level. These findings are useful as one of the data bases for development of an optimum SMB design to support the weight of rotors in an axial direction.     

组合式光纤流量传感器

提出了一种新型的组合式光纤流量传感器，介绍了它的工作原理，详细讨论了光脉冲转换器的设计要点，据此设计了传感头，并给出了它的实验结果。     

压力传感器的应力计算

从弹性力学的板壳理论出发,对不同参数的凸型板结构形变膜受压后的应力分布作了近似计算,为高线性度SOI压力传感器的芯片设计提供了理论指导。用BESOI技术研制的凸型板结构集成压力传感器的非线性度达0 09%,样品灵敏度的实测值与应力计算理论值的差别约17%。     

Effect of Post Annealing on the Microstructure and Magnetic Properties of NdFeB/α-Fe/NdFeB Thin Films

A series of nanocomposite thin films, composed of Nd2Fe14B and α-Fe, has been prepared by DC-magnetron sputtering combined ion beam sputtering onto Si (100) substrates. The effects of post annealing on the microstructure and magnetic properties of [NdFeB/α-Fe/NdFeB]-type thin films have been investigated. The X-ray diffraction (XRD) study showed that annealing of the films for 30min at temperatures 550,600,650,700℃ resulted in the appearance of diffraction peaks, characteristic for Nd2Fe14B tetragonal structure, α-Fe and Nd2O3 phases. The investigation using the Vibrating Sample Magnetometer (VSM) with a maximum applied field of 2 T indicated that with the increase of the annealing temperature, the magnetic properties of the multilayer films were improved and reached peak value at 650℃ (Hci=41.72kA·m-1, Mr/Ms=0.4, (BH)max=30.35kJ·m-3), after which the magnetic properties were decreased greatly. Along with the increase of the thickness of α-Fe layer from Tα-Fe16nm, the coercivity Hci, saturation magnetization Ms, and remanence ratio Mr/Ms all declined. As the Atomic Force Microscope (AFM) indicated, after being annealed at 650℃ for 30min, the sample was showed fine surface morphology with grain size 60nm≤dα-Fe≤80nm and 100nm≤dNdFeB≤150nm.     

可燃气体检测报警系统的分析和检修

分析可燃气体检测报警系统的组成和检修方法，并列举了根据故障现象进行分析和检修的实例。     

电脉冲快速退火对铁基非晶合金性能的影响

采用大电流交流脉冲对非晶Ｆｅ７８Ｂ１３Ｓｉ９合金进行了去应力退火。初步探讨了电脉冲加热对加热速率和该合金内应力释放、退火脆化以及最终软磁性影响的基本规律。结果表明：电脉冲加热可以得到远高于常规退火的加热速率，选择合适工艺参数可使非晶合金内应力释放９０％，软磁性（Ｈ＿ｃ和Ｂ＿ｓ）达常规退火后的９５％以上，与此同时使合金的延性（断裂应变ε＿ｆ）维持在０．９以上，从而有望实现非晶合金磁性与延性的合理配合。     

Current ISI and monitoring technologies in European energy industries

This paper reviews available information on the state of practice of inservice material property monitoring performed in European energy industries. Current practice includes a range of standard nondestructive testing and monitoring methods, improved remote sampling and surveillance specimen testing, and new monitoring techniques which are emerging from ongoing development programs. These new technologies include ultrasonic, positron annihilation, neutron diffraction, and magnetic techniques.