绿色供应链管理的基本原理

人口、资源与环境三者之间的矛盾日益突显，要求制造业提高其活动与环境的相容性。绿色供应链管理是从系统的观点与集成的思想出发解决制造业与环境之间冲突的有效方式。从可持续发展的思想出发建立了绿色供应链的概念模型，分析了绿色供应链管理的目标，在此基础上探讨了绿色供应链管理的基本原理，认为共生原理、循环原理、替代转换原理与系统开放原理是实施绿色供应链管理应该遵循的基本原理。     

建筑陶瓷企业实施精益生产研究

分析了建筑陶瓷企业实施精益生产的条件和当前推行精益生产的主要障碍，对应用中存在的问题进行了分析并提出了相关建议。     

拖拉器在水平井生产测井中的应用

文章介绍了水平井拖拉器的基本结构及性能指标；总结了使用拖拉器进行水平井生产测井的测并工艺：介绍了在塔里木油田水平井生产测井的实际应用情况，给出了测井解释结果。     

Tandem queues with general blocking: A unified model and comparison results

We study tandem queues with finite intermediate buffers and develop a general blocking scheme that unifies and generalizes various blocking schemes previously studied in the literature, such as manufacturing blocking, communication blocking, kanban blocking and its variations. In the general blocking scheme, job movement and service at each stage are controlled by three parameters, which represent, respectively, the upper limits (at that stage) on work-in-process inventory, finished goods inventory, and buffer space. We derive a set of recursive equations that characterize the dynamics of the system, in terms of the job completion and departure processes, and establish comparison results for these processes in the settings of stochastic ordering, variability ordering and stochastic convexity. Free of distributional assumptions, the results provide characterization of system behavior with respect to the control parameters as well as to the arrival and service processes. We also compare system performance under two different modes of operation: make-to-order versus make-to-stock, and demonstrate the trade-off between improving service and reducing inventory. Numerical studies are also presented to illustrate the diversity of performance trade-off, including composition of inventory, offered by the general model.Supported in part by NSF under grant ECS-89-96201.     

抽油机球铁齿轮的化学成分及生产工艺

为提高抽油机减速器齿轮铸件的机械性能，提出以Sn代替Mo作为合金元素，并通过试验确定了合理的Si、Cu、Sn的加入量。指出Si加入量应控制在1．9％－2．1％范围内，同时加入0．36％～0．9％的Cu和0．025％～0．07％的Sn，可保证球铁的强度和延伸率都满足QT700－2的要求。鉴于试件与实际铸件的表面硬度有一定的差值，为提高铸件表面硬度，进行了余热正火试验，并给出了铸件在铸型内的时间－冷却温度曲线。最后根据球铁化学成分的选择结果，进行了齿轮生产试验。     

On modeling the design of cellular manufacturing systems

A new optimization model is discussed for the design of cellular manufacturing systems. It is based on an integer programming formulation that updates some other models by eliminating redundant machine assignment and cost coefficients dependent on cell configuration. To reduce computational burdens, a simplified integer programming model and a decomposition algorithm are proposed. Several computer solutions were performed to evaluate the performance of the new model. The computational results are discussed.     

A methodology for investigating effects of cell size on operational flexibility in flexible manufacturing systems

There are two aspects to cell formation in flexible manufacturing systems, cell sizing or deciding on the optimum number of machines to be allocated to each cell, and then allocation of specific machines to each cell. Although the latter problem has been investigated extensively there is a paucity of published work on the former. This paper discusses the effects of cell sizing on operational flexibility.Operational flexibility is that aspect of flexibility that enables manufacturing systems to respond with speed and efficiency to changes in the manufacturing environment while maintaining an effective level of control.     

四坐标数控加工原理及算法研究

本文对四坐标数控加工原理和算法作了详细介绍，尤其对四坐标加工的刀轴矢量算法进行了研究，提出了用垂直于回转轴的平面与刀具运动方向和前导角形成的圆锥面求交，生成刀轴矢量的方法，该方法具有立意新颖、思路清晰，性能可靠，易于在微机上实现等特点，对复杂曲面零件的加工编程，具有重要的实用价值。     

柔性制造系统的负荷分配及路径规划方法

柔性是柔性制造系统（ＦＭＳ）的一个基本优点，但这一基本优点却往往被人们忽视，许多现在运行的ＦＭＳ不是缺乏柔性，就是没能充分利用可获得的柔性来提高生产效率。柔性制造系统的负荷分配和路径规划问题正是这种柔性的一个主要方面，然而，路规划决策却往往被。其中一个主要原因人们仍不能从传统的生产管理概念中解放出来。本文在明确概念区分的基础上，提出了一种柔性制造系统的负荷分配和路径规划的线性规划模型，其主要特点是     

零部件通用对企业竞争战略的影响

零部件通用是目前研究的一个热点问题,但是绝大多数文章都是针对零部件通用对库存水平的影响。本文从战略的角度,分析了零部件通用对企业竞争战略的影响,发现它不仅对降低费用有着积极的影响,而且对缩短新产品开发周期、制造过程重组等方面也有着积极的作用。因此,零部件的通用性已经从战术上的节约费用上升为战略上的竞争武器。