广义物质平衡计算在凝析气藏开采动态预测中的应用

从经济的角度考虑 ,对小型凝析气藏衰竭式开采动态的预测往往不必或不值得进行数值模拟研究。常规物质平衡 (黑油 )计算方法只局限于黑油和干气藏 ,应用于凝析气藏则存在很大的误差。Walsh提出的广义物质平衡计算方法 ,可用于包括黑油、干气藏、挥发油气藏和凝析气藏在内的所有油气藏。文中将一个小型凝析气藏衰竭式开采动态的数值模拟结果与广义物质平衡计算结果进行了对比 ,结果表明 ,Walsh方法简便、应用更广泛 ,可用于规模较小、不适合进行数值模拟研究的凝析气藏的现场开发优化。     

Change in Availability of Mineral and Raw Material Resources as a Result of Scientific and Technical Progress

The tendencies characterizing worsening of natural, mining and technical, as well as mining and geological conditions of deposit mining are analyzed for the last 100 years. The change in prices for mineral raw material is shown, and the influence exerted by scientific and technical progress in the sphere of mining and processing of copper-containing ores is established. An approach to the estimate of available mineral reserves and possibility of their involvement in mining is stated.     

国产550MW水轮发电机用新材料和新工艺

介绍了二滩水电站 5 5 0MW机组发电机定转子绕组方面所采取的新结构、新工艺和新材料     

大型钢制焊接双层低温储罐设计建造

介绍了大型钢制焊接双层低温储罐的结构形式、选材、建造、检验及保冷要求 ,结合所设计的低温液氨储罐 ,对设计建造这类储罐必须考虑的一些问题作了分析     

Ti基MnO_x型DSA析氧电极材料的性能

本文报导了新型 Ti/SnO_2+MnO_x+RuO_2/MnO_x(DSA)电极材料的各种性能,其中包括电极的导电性、表面粗糙度、电化学活性表面积、析氧阳极特性等,并用 X 射线衍射法进行了物相分析、用 SEM观察了表面形貌。确认该电极性能良好,加之成本较低,可作为酸性介质中的析氧电极材料。     

对完善公司物资供应管理体系的思考

针对经“债转股”和资产重组成立的北京东方石油化工有限公司物资供应管理特点和存在的问题，从供应管理模式、采购方式、采购过程监控、信息化管理、物资储备、人员结构等6个方面，分析了目前供应管理存在的问题和不足，并针对问题通过对物资供应管理体制的分析和思考，提出对策，为新的物资供应体制的建立提供参考。     

Structure and Magnetic Properties of LaCo_(13-X)M_X Intermetallic Compounds

ＳｔｒｕｃｔｕｒｅａｎｄＭａｇｎｅｔｉｃＰｒｏｐｅｒｔｉｅｓｏｆＬａＣｏ＿（１３－Ｘ）Ｍ＿ＸＩｎｔｅｒｍｅｔａｌｌｉｃＣｏｍｐｏｕｎｄｓＷＵＪｉａｎＭｉｎ；ＬＩＦｅｎｇ；ＴＡＩＬｉＣｈｉａｎｄＺＨＥＭＧＱｕｎＳｔｒｕｃｔｕｒｅａｎｄＭａｇｎｅｔｉｃＰ...     

准分子激光的应用

本文介绍了准分子激光器的基本类型、主要应用领域及其与材料相互作用的机理。对准分子激光在电子工业、生物医学和材料加工方面的一些重要应用做了比较详细的论述。     

结构振动控制中压电阻尼技术研究—压电被动阻尼技术（一）

压电阻尼技术有两种类型：压电被动阻尼技术和压电主动阻尼技术。本文对其中的压电被动阻尼技术进行了研究，结果表明：通过给压电元件并联适当的外部电路，可使压电系统具有与粘弹阻尼材料及动力吸振器相似的物理特性。合理配置电路参数，可以实现最优阻尼比。     

Application of SiC-Si functionally gradient material to thermoelectric energy conversion device

Because of its high–temperature chemical stability, SiC ceramic is a promising material for high-temperature device applications such as thermoelectric energy converters. However, the electrical conductivity of SiC ceramic is too low for it to be used as a thermoelectric energy converter at the cold junction. Therefore, we propose a SiC-Si functionally gradient material (FGM) in order to improve the electrical conductivity of the SiC ceramic at the cold junction. An SiC rod was fired in a temperature gradient furnace. One end of the SiC rod was maintained at 2473 K and the other end was maintained at 1973 K for 30 min. After firing, the porous SiC edge fired at 1973 K was dipped into molten Si in order to infiltrate molten Si into the porous SiC. The microstructure of the FGM is classified into three regions: the SiC-Si composite material; the porous SiC ceramic; and the densified SiC ceramic. The electrical conductivity, the Seebeck coefficient and the thermal conductivity for each region of SiC-Si FGM was measured at 300 K; a figure of merit was calculated. The figure of merit of the SiC-Si FGM at the cold junction, at room temperature, was 10⁸ times higher than that of a nongradient SiC ceramic.