一种新的基于极大似然估计的系统辨识方法

进化计算是一种基于自然选择和自然变异机制的并行随机优化算法。由于递推极大似然估计法难以实现性能指标函数的全局寻优，所以本文提出了将改进的进化计算用于系统参数辨识的方法。计算机仿真结果表明，该算法能够实现似然函数的全局寻优。     

A stochastic maximum principle for systems with jumps, with applications to finance

We consider a stochastic control problem with linear dynamics with jumps, convex cost criterion, and convex state constraint, in which the control enters the drift, the diffusion, and the jump coefficients. We allow these coefficients to be random, and do not impose any L^p-bounds on the control.

We obtain a stochastic maximum principle for this model that provides both necessary and sufficient conditions of optimality. This is the first version of the stochastic maximum principle that covers the consumption–investment problem in which there are jumps in the price system.     

二维加速度激光传感器的设计

以角锥棱镜作为惯性元件,利用光学干涉原理,可以实现对运动物体的二维加速度测量。本文给出了二维加速度激光传感器的设计理论和测量原理。     

关于蒸汽疏水器规格尺寸选择的探讨

本文依据疏水器作用原理和实践经验对影响选择疏水器规格尺寸的主要因素进行了分析。提出:选择疏水器应排凝水量大,选择倍率适当,符合产品样本的最大、最小工作压力,准确确定其前后压力。     

复参数最大熵图像重建的剑桥算法

本文将正实参数的最大熵图像重建的剑桥算法推广到复参数，此算法能较好的地恢复复参数“图像”。文中还给出了此算法在逆散射成像中应用的计算机模拟实验结果。     

关于瞬态应力强度因子和裂纹扩展加速度之间的关系探讨

将动态焦散线法与高速摄影技术相结合,本文记录了高分子材料悬臂梁内裂纹扩展加速、减速过程。一方面,利用动态焦散线可确定扩展裂尖的瞬态应力强度因子;另一方面,利用最小二乘法将裂纹扩展的水平、垂直位移分量拟合成时间(t)的四次多项式,描述了裂纹扩展方向、裂纹扩展加速度以及裂纹扩展加速度与动态应力强度因子的关系。结果表明:裂纹扩展加速度与动态应力强度因子之间存在一定的依赖关系;利用最小二乘法将裂纹扩展的水平、垂直分量拟合成时间(t)的四次多项式,可以对裂纹的扩展方向、加速度进行定量分析。     

复合微粒高性能混凝土的二级界面显微结构及耐久性研究

将天然纳米纤维材料及活性球形掺合料复合应用于高性能混凝土中,用以改善高性能混凝土的二级界面,探讨胶凝材料的颗粒紧密堆积及显微结构。对混凝土力学性能的研究表明:改善混凝土的二级界面,可以大幅度提高其抗弯强度和弹性模量;对耐久性的研究表明,由于加入了纳米纤维材料,改善了体系颗粒级配及二级界面显微结构,增加了体系密实度,是提高混凝土抗冻性、抗渗性的有效途径。因而,研究高性能混凝土的二级界面显微结构,对于提高高性能混凝土的宏观物理力学性能及耐久性存在巨大潜能。     

MAXIMUM ENTROPY DECONVOLUTION OF XPS PEAK

Necessity of XPS spectrum,deconvolution,disadvantages of the traditional Fast Fourier Tranderm decon-volution method(FFT),princtple,method and advantage ofMaximum Entropy Deconvolution Method (MEM) are de-scribed.Criteria for determing the number of data points sam-pled in MEM are the main point disccussed in the paper,someXPS deconvolution applications of our MEM software showthat the MEM makes XPS deconvolution much easier than thetraditional FFT method.     

Predicting plant yields using soil testing for phosphorus: Effects of error in the estimation of the maximum yield on interseasonal comparisons of yield prediction

Results from long-term field experiments in south-western Australia are presented in the form of relationships between yield, expressed as a percentage of the maximum yield, and soil test for phosphorus (P) values. Maximum yields were not always indicated by well defined yield plateaux. Different methods have been used to estimate the maximum yield value which is used to calculate yield as a percentage of the maximum yield so as to remove interseasonal variation. For all of these methods and for the same site, the same P fertilizer (superphosphate), and the same plant species, the relationship between yield and soil test P differed for different years. Consequently fertilizer recommendations based on the assumption that this relationship is constant are likely to be incorrect. We therefore question the validity of the common practice in soil testing programmes of using percentage yield values to remove interseasonal variation.     

准连续波体制雷达最大熵方法的算法选择

准连续体制作为一种新型雷达体制以其固有的优越性给雷达界带来了巨大的冲击。其数字信号处理系统的开发是进一步完善该体制雷达的关键。本文针对数字信号处理系统中最大熵谱外推电路的算法选择进行了研究。