三峡蓄水初期水库近坝区水环境特性分析

通过现场观测和数值模拟的方法，对三峡水库近坝区在蓄水初期的水流和水环境特性进行了 分析。对蓄水初期的溶解氧、BOD、COD和NH3-N、Cu等水质参数进行了观测，将蓄水初期水质资料与蓄水之前的结果进行了对比，分析了近坝区水环境变化趋势。采用大涡模拟紊流模型，考虑水体表面的热交换，对三峡近坝区的流动和水温分布特性进行了模拟。研究结果表明，三峡水库蓄水初期近坝区水流特性明显改变，主要表现为水深增加、流速变缓，部分地段有回流区出现。水质指标变化不明显，坝前断面溶解氧浓度、悬浮物浓度有所降低，和悬浮物密切相关的污染物总磷、重金属也随之降低；蓄水初期139m水位时坝前水域尚没有出现温度分层现象。     

Engset multi‐rate state‐dependent loss models with QoS guarantee

We consider a single link loss system of quasi‐random input, described by the Engset multirate loss model (EnMLM). Blocked calls may once reattempt to be connected to the system requiring less bandwidth; then the system is described by the single retry model for finite sources (f‐SRM). The EnMLM and the f‐SRM are extended with the single threshold finite source model (f‐STM), where calls may attempt to be connected to the system with less bandwidth requirements, according to the link occupancy, before blocking occurs. We focus on CBP equalization in the EnMLM, f‐SRM and f‐STM, under the bandwidth reservation (BR) policy. For this analysis, we apply two approximate methods, the Roberts' method and the method of reverse transition rates (RTR), which lead to a recursive CBP calculation. We evaluate the accuracy of the above models under the BR policy by comparing the analytical with simulation CBP results, based on the relative approximation errors (RAE). The results are highly satisfactory because they show that the proposed models (formulas) lead to small RAE. Copyright © 2005 John Wiley & Sons, Ltd.     

新型废水厌氧处理工艺——内循环厌氧反应器

介绍内循环(IC)厌氧反应器的发展、基本结构、运行机理。分析该反应器的工艺过程,指出该工艺具有处理效率高、抗冲击能力强等优点。针对IC反应器存在的缺陷,人们对该反应器进行技术改进:通过提高它的内循环的气量进行处理低浓度有机废水;增加外循环装置缩短IC反应器的启动周期。     

文昌13-1-A9井酸化后含水上升分析及预测

文昌13-1-A9井酸化后综合含水达到54%,综合地质资料和油藏生产动态分析认为,导致文昌13-1-A9井酸化后含水上升加快的主要因素有:油水边界上升加快;酸化后渗透率提高,使油层与水体连通能力增强,加剧了边水的突进速度;酸化后采液指数提高,压降增大,导致底水锥进;油井位于油水过渡带内。在分析含水上升原因的基础上利用logistic模型对含水进行了预测,预测结果认为到2008年含水将达到80%以上。     

Determining the characteristics of systems with multiple inputs and multiple outputs

A simple and computationally efficient method of determining the transfer function and other characteristics of systems with multiple inputs and multiple outputs (MIMO systems) described by autoregression equations is proposed. The method is based on the use of the discrete Fourier transformation. The algorithm is highly suitable for computer implementation. The efficiency and simplicity of the method are illustrated using the example of a system with three inputs and three outputs. The proposed concept may be applied to systems described by the autoregression sliding mean.     

江口拱坝坝基渗流场有限元法分析

运用固定网格结点虚流量法及排水子结构技术，对江口拱坝坝基的防渗与排水渗控制施、两岸山体边界条件、隔水岩层阻渗及岩体成层产状等因素在影响坝基渗流场特性中的具体作用进行了计算分析。结果表明，排水子结构技术在精细求解复杂坝基渗流场中具有明显的优势，它在理论和算法上严密，完全能仿真模拟各个排水孔的几何尺寸及排水降压的真实水力行为，不仅能明显地提高计算效率，还能使渗流场的精度大大提高。     

喷气客机涡轮风扇发动机的振动诊断与改进

通过动态分析和现场测试对一喷气客机的发动机振动作出诊断，发现涡轮叶轮的变柔导致其极转动惯量显著下降，因而改变发动机的动态特性，使其临界转速接近飞机的巡航转速，产生不应有的振动和噪声。文章提出了具体改进方案，已为研制单位采用。     

SHARED: An information model for cooperative product development

One fundamental issue in developing collaborative engineering systems is the representation of product information which supports communication and coordination. This product information includes not only the geometric and physical properties of the product and its parts, but also information about functions, constraints and the design rationale. In this paper, we describe an information model, SHARED, which was developed for encoding product information in DICE, a distributed and integrated environment for computer-aided engineering. SHARED provides multiple levels of both functional and geometric abstractions, multiple views and techniques for maintaining consistency between the various abstractions and views. These elements are essential for a good representation model of product information. The use of the SHARED model is illustrated through an example, depicting the various representations of a product as it evolves through the design process. The SHARED model has been implemented over a distributed OODBMS as a toolkit/framework for developing environments which need to model, manipulate and communicate product information between distributed cooperating applications, while supporting coordination between them.     

万安水利枢纽底孔坝段中隔墙流激振动响应分析

 研究了万安水利枢纽底孔坝段中隔墙在水流脉动壁压作用下的结构随机振动问题，进行了一种泄流工况下的隔墙结构流激振动响应统计量的理论计算，模拟计算了隔墙－水流－基础耦合系统固有频率对流激振动响应的影响，并对水流脉动壁压随机荷载作用下的结构动力可靠度进行了理论分析。