微机辅助设计广播天线阵

随着广播事业的迅速发展，中波广播的定向发射将很快在我国提上日程。由于天线阵综合的工作量和对经验的依赖都比较大，非专门工作者殊难进行。本文提出的借助微机辅助设计的方法，对天线阵有一般了解的人员即可用其设计广播天线阵。     

Broadband MIMO Antenna System for 5G Operations in Mobile Phones

A broadband 8‐antenna multiple‐input and multiple‐output (MIMO) system working for 5G new radio N77 (3.3‐4.2 GHz) in mobile terminals is proposed. In particular, each antenna element/unit consists of a monopole‐type meandered branch and an inverted U‐shaped self‐isolated antenna branch; and the antenna unit is fed by the meandered branch. The antenna unit has two resonances generated separately by each branch of the antenna unit. Since the monopole couples strongly with the self‐isolated antenna element that has the inherent self‐isolation characteristics, quite good isolation for the broadband 8‐antenna MIMO system can be obtained. The results such as antenna efficiency, radiation patterns, envelope correlation coefficient, and channel capacity are also presented.     

基于分形理论对天线的讨论

利用分形理论设计出的分形天线和分形天线阵,具有小巧、灵活、轻便、同时还具有多频带、宽频带和“自加载”特性,它们存在多种多样形式,在军事工业和通信行业将有很大的发展潜力。     

浇注型耐热聚氨酯树脂材料的合成及性能

以二异氰酸酯(4,4’-二苯甲烷二异氰酸酯MDI;4,4’-二环己基甲烷二异氰酸酯Hl2MDI),聚醚多元醇(PPG),小分子交联扩链剂,催化剂及助剂合成了一系列耐热聚氨酯树脂材料。用FT-IR表征了结构,用X射线衍射分析了微观结构,用DSC,TGA对其热稳定性进行了分析测试,对力学性能也进行了测试。结果表明,合成的聚氨酯材料具有高耐热性和卓越的力学性能。     

多孔PZT95/5铁电陶瓷的机械性能和铁电性能研究

采用添加造孔剂的方法制备多孔锆钛酸铅(PZT95/5)铁电陶瓷, 研究了孔结构包括孔隙率、孔径及孔形状对多孔PZT95/5陶瓷机械性能和电性能的影响及机理, 并揭示多孔PZT95/5陶瓷微观结构、机械性能和铁电性能的内在联系。研究表明: 孔隙率的增加降低了多孔PZT95/5陶瓷的声阻抗, 改善了陶瓷与封装材料的声阻抗匹配. 孔隙率增加, 多孔PZT95/5陶瓷的屈服应力和剩余极化强度降低, 矫顽场强增大。孔结构对多孔PZT95/5陶瓷屈服应力的影响可由应力集中理论解释; 多孔PZT95/5陶瓷剩余极化强度随孔结构的变化可用内应力结合空间电荷理论加以解释。     

材料力学性能对液力胀接过程的影响分析

为寻求装配式空心凸轮轴结构设计和材料选择的理论依据,应用弹塑性力学分析了弹性模量和流动应力对液力胀接的影响.将内外管的变形过程简化为平面应变问题,根据典型点应力-应变曲线分析了液力胀接过程,并给出了不同材质套管的连接条件.研究结果表明:影响液力胀接的主要因素是内外管弹性模量和流动应力,这两个材料参数决定胀后内外管弹性回复量的大小;实现液力胀接内外管应满足的条件是:内外管弹性模量的比值大于内外管流动应力的比值.     

Biomimetic Robust Starch Composite Films with Super-Hydrophobicity and Vivid Structural Colors

The starch composite films (SCFs) will be one of the best alternative packaging materials to petroleum based plastic films, which mitigates white pollution and energy consumption. However, weak mechanical stability, water resistance, and dyeability has hindered the application of SCFs. Herein, a bioinspired robust SCFs with super-hydrophobicity and excellent structural colors were prepared by fiber-reinforcement and assembling SiO₂/Polydimethylsiloxane (PDMS) amorphous arrays on the surface of SCFs. The properties of the designed SCFs were investigated by various methods including scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermo-gravimetric analysis (TGA), a tensile test, contact angle (CA) test, and an optical test. The results showed that the obtained SCFs possessed a higher tensile strength (55.17 MPa) attributed to the formed abundant hydrogen bonds between the molecular chains of the starch, cellulose fiber, and polyvinyl alcohol. Benefiting from the nanostructure with rough surface which were modified by materials with low surface free energy, the contact angle and sliding angle of the film reached up to 154° and 2°, respectively. The colors which were produced by the constructive interference of the coherent scattered light could cover all of the visible regions by tuning the diameters of the SiO₂ nanoparticles. The strategy in the present study not only reinforces the mechanical strength and water resistance of SCFs but also provides an environmentally friendly way to color the them, which shows unprecedented application potential in packaging materials of the starch composite films.     

Ag/LaNixCo1-xO3触点材料的制备及电接触性能研究

本文运用溶胶-凝胶燃烧法合成了双钙钛矿型LaNixCo1-xO3(LNCO)纳米材料,利用粉末冶金和热挤压技术制备了相应的Ag/LNCO触点材料及元件样品。重点考察了不同Ni、Co含量对Ag/LNCO触点材料微观结构、物相组成、物理性能、力学性能及电寿命服役能力的影响,对其电弧侵蚀失效行为进行了研究,并与SnO2粉体增强Ag基触点材料进行对比。结果表明:溶胶凝胶法合成的LNCO纳米颗粒粒径为20-30 nm,经粉末冶金工艺制备的Ag/LaNi0.5Co0.5O3触点材料电学性能和电寿命都优于Ag/SnO2触点材料,其电阻率低至2.10 μΩ?cm,电寿命性能达到51287次。表明Ag/LaNi0.5Co0.5O3触点材料性能较佳,是一种可以取代Ag/CdO的新型触点材料。     

Effect of selective laser melting on microstructure and properties of AZ91D alloy

Selective laser melting technology is used to manufacture porous and solid AZ91D alloys. The effects of laser power and hatch spacing on the density, blowholes, microstructure and mechanical properties of AZ91D alloy are studied. The laser power and hatch spacing play a significant role in the density and blowholes of AZ91D specimens. The grains size of specimens increases from 1 μm–2 μm to 8 μm–10 μm from the bottom to the top in single molten pool. Compared with grain size of die‐casting alloy (30 μm), that of selective laser melted gets refinement. There is no significant change in microstructure in the bottom, middle and top of specimens. The micro‐hardness of AZ91D alloy, reaching up to 115.3 HV 0.1, is superior to that of die‐casting alloy (56 HV 0.1). The compression properties of porous and solid specimens reach the degree of die‐casting solid magnesium alloy. AZ91D alloy shows the potential in the application of medical biodegradable materials.     

应用水化硅酸盐纳米粉体制备块体材料

以磨细生石灰和硅质原料的混合物为前驱物,采用动态水热合成方法制备了水化硅酸盐纳米粉体.借助SEM、TEM及氮吸附等测试方法,分析了制得的水化硅酸盐粉体的形貌、粒径和比表面积.将制得的水化硅酸盐纳米粉体压制成块状固体.采用正交设计方法研究了成型压力、水泥掺量、纤维掺量、聚合物掺量等因素对块体材料力学性能的影响.结果表明:由该粉体压制成的块体材料立即具有强度和耐水性,且表观密度低;成型压力是影响其力学性能最显著的因素.