无粘结预应力蛋形消化池的施工技术

石家庄市桥东污水处理厂有6座11500m3无粘结预应力混凝土蛋形消化池,本文介绍其非预应力钢筋、模板体系、混凝土和预应力工程等结构施工成套技术。     

Time and Temperature Factors in Construction of Rock Strength Criteria

Using the synthesis of the kinetic concept on solid strength and the Coulomb - Mohr strength theory as the base, the failure conditions taking into account the time and temperature factors are obtained.     

Identification of Chaos Representations of Elastic Properties of Random Media Using Experimental Vibration Tests

This paper deals with the experimental identification of the probabilistic representation of a random field modelling the Young modulus of a nonhomogeneous isotropic elastic medium by experimental vibration tests. Experimental data are constituted of frequency response functions on a given frequency band and for a set of observed degrees of freedom on the boundary of specimens. The random field representation is based on the polynomial chaos decomposition. The coefficients of the polynomial chaos are identified setting an inverse problem and then in solving an optimization problem related to the maximum likelihood principle.     

VN合金在大规格角钢生产中的应用研究

大规格角钢主要用于铁塔制造和建筑结构中。唐钢过去用16Mn钢生产Q345级别角钢，因供轧化学成分范围较窄，供轧率偏低。通过加入V-Fe合金及VN合金进行微合金化，设计了16Mnv(N)钢种生产角钢，使角钢综合性能有显著提高。分析比较了16Mn、16MnV及16MnV(N)角钢的性能，认为在大规格高强度角钢生产中，用VN合金进行微合金化，其效果是最佳的。     

基于模糊信息处理的中板轧机微机在线监测系统

中板轧机是中板厂最重要的生产设备，对其工况进行在线监测意义重大，各种传感器将轧机的工况信息传送给微机系统，微机系统将这些信息进行模糊处理，发出相关信息，指导系统安全，高效运行。     

以方位角表示的前方交会定点公式在矿井贯通测量中的应用

以简单的方位角计算公式为基础,推导出了以方位角表示的前方交会定点公式,并在该矿的贯通测量中得到了应用。     

考虑介质变形和长期导流能力的裂缝性气藏压裂产能模拟研究

在气藏开采过程中，由于孔隙压力的不断降低，使得介质变形而导致渗透率的变化，进而影响井的产量。针对这一问题，提出了各种流体与固体耦合的数值模拟模型。然而，对于裂缝性储层和多相渗流问题，流固耦合模型中许多参数不易获取，且求解难度很大，使得耦合模型存在一定的应用局限性。很少有文献在气井产能模拟时将介质变形和就地的长期导流能力加以综合考虑。文章考虑介质变形引起的天然裂缝渗透率的变化和裂缝导流能力随时间递减的影响，建立了裂缝性气藏压裂后气水两相渗流数学模型，推导出了数值计算模型；本模型易于编程求解，对于研究裂缝性气藏的渗流特征，特别是进行单井压后产能预测具有一定的实用意义。计算表明：不考虑介质变形和导流能力递减所预测的气产量偏高；目前普遍使用的气藏数值模拟软件中，假定渗透率、裂缝导流能力为常数，以致模拟计算结果比实际偏高。     

钌基厚膜电阻传导模型初探

介绍钌基厚膜电阻的三种传导模型。三种模型都可以得到较满意的R—V曲线，不足处是链模型得出电阻率和导电相粒子形状及尺寸的关系和实验事实不符；有效介质模型不能反映厚膜电阻形成过程中众多因素的影响；渗透模型很多参数的获得有赖经验公式。渗透模型能反映烧结过程中更多因素的影响，并可解释方阻与导电相粒度及峰值温度的变化关系。     

Prediction of spectral reflectance factor distribution of automotive paint finishes

It is necessary to determine the accurate reflectance of painted surfaces for the review of paint finishes by computer graphics (CG) before actual painting of the exterior color of automobiles, and for quality control during production and inspection processes. We have optimized a method for measuring reflectance by using a statistical technique. We have found that the reflectance of a painted surface is best measured at an incident angle of 60° and at five aspecular angles of 10°, 18°, 28°, 40°, and 90°. Our method makes it possible to accurately reproduce reflection characteristics of paint finishes containing special flake pigments, such as pearl mica. Also it was proved that our method can apply not only to solid and metallic coatings but to all painted surfaces. © 2005 Wiley Periodicals, Inc. Col Res Appl, 30, 275–282, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20125     

激光二极管线阵光束变换研究

推导出激光二极管线阵光束通过透镜系统的光强分布表达式，分析了出射光束的传输特性，设计一种凹柱透镜的光束变换系统得到一维均匀光强分布。此外，给出扩展角宽度的计算公式。