Study on Reduction of Sulfur Content in FCC Gasoline

Reduction of sulfur content in FCC gasoline was studied in a fixed fluid bed (FFB) unit by using metal-modified LV-23 FCC catalyst. The results showed that the sulfur content in FCC gasoline could be reduced with LV-23 catalyst modified with zinc, palladium, zinc-palladium, zinc-cobalt, and zinc-nickel. Among these metals or metal combinations, palladium-containing catalyst was the most effective. Desulfufization of the heavy fraction of FCC gasoline was more effective than full-range gasoline under the same conditions with palladium-containing catalysts. A high reaction temperature was favorable to desulfurization, but it would reduce the yield of liquid product. After desulfurization reaction, the olefm content of product gasoline decreased while the aromatic and iso-alkane contents increased. Removal of thiophene and benzothiophene is higher.     

Effect of Rare Earth Elements on Thermal Fatigue Property of Low Chromium Semi-Steel

The effect of rare earth elements on eutectic carbide‘s morphology of low chromium semi-steel in as-cast state and after heat treatment was investigated, and accordingly, the thermal fatigue property of this material was studied. The results show that RE can improve the eutectic carbide‘s morphology, inhibit the formation and propagation of thermal fatigue cracks, therefore, promote the thermal fatigue property, which is more noticeable in case of the RE modification in combination with heat treatment. The optimal thermal fatigue property can be obtained when treated with 0.2% RE modification as well as normalization at 950℃ for 3h.     

钢坯修磨金属切除率数学模型的研究

从分析修磨过程运动学和单个磨粒切削入手,建立了磨削深度与磨削过程诸参数(如工艺、材料性能、砂轮性能等)的关系表达式,从而建立起金属切除率与各单项参数的定量关系,为改善或提高修磨效率和修磨过程控制提供了有意义的根据。理论分析与实验结果吻合良好。     

重金属污染物动态吸附试验及数学模拟

本文采用泥沙动力学中Ｒｏｕｓｅ等人用来研究泥沙浓度沿垂线分布的装置。对泥沙吸附重金属污染物进行了动态模拟。试验分有底泥和无底泥两种情况。研究中发现在Ｒｏｕｓｅ装置的水力、泥沙条件下泥沙吸附重金属污染物达到平衡状态需要６小时以上，由极坐标下的重金属迁移转化数学模型方程，在本文具体试验条件下进行数值求解，计算结果和试验结果合良好，说明数学模型是正确合理的试验是可靠的。计算时依据室内静态试验结果，对动态     

大型离心复合球墨铸铁轧辊的生产

简述了我公司为舞阳铜厂试制４２００ｍｍ厚板轧机离心复合球墨铸铁轧辊的性能要求、内外层双重金属铸造工艺参数的选择及整个铸造生产工艺过程。     

Zirconium tetra-n-butylate modified with different organic acids: Hydrolysis and polymerization of the products

In this work, (a) complexation reaction of zirconium tetra-n-butylate, Zr(OBu ⁿ )₄, with MAc and different organic acids, (b) the hydrolysis reaction of modified Zr species, and (c) the polymerization reaction of complex products are studied. Zr(OBu ⁿ )₄ was reacted with different mole ratios of methacrylic acid (MAc) at room temperature and the maximum combination ratio was found to be 1:2 [Zr(OBu ⁿ )₄:MAc] by FT-IR. The modification of zirconium tetra-n-butylate with the acid mixtures [methacrylic acid-acetic acid (MeCOOH), methacrylic acid-propionic acid (EtCOOH), methacrylic acid-butyric acid (PrCOOH)] was made for a combination ratio of 1:1:1 [MAc:RCOOH:Zr(OBu ⁿ )₄; R: Me, Et, Pr] and the products were characterized by¹H-NMR, FT-IR, and UV spectroscopies. Following their synthesis, hydrolysis of the complexes with various amounts of water and polymerization with benzoyl peroxide were realized. The hydrolysis and polymerization products of the complexes were studied by Karl-Fischer coulometric titration and thermal analysis, respectively. Methyl ethyl ketone(MEK) and chloroform were chosen as solvents.     

高温合金材料在铝电解工业中的应用探讨

对高温合金在铝电解工业用作惰性金属阳极材料的选择进行阐述，并就实际应用过程中的抗氧化耐腐蚀性进行探讨；阐述适用于铝电解工业的惰性阳极合金所应具备的必要条件和必须解决的问题，并介绍目前有关的研究动态和研究方向。     

Photostabilisation of colour formers for heat-sensitive recording systems: Effect of counter-ions on the photofading of fluoran dyes

Fluorans are given considerable attention as functional dyes for heat-and/or pressure-sensitive recording media. Numerous potential metal complexes were synthesised to prolong the life of coloured species. The protecting effect of these compounds against the photofading was examined on cellulose. It was found that the zinc or nickel salts of 3,5-dihydroxy-2-naphthoic acid and its derivatives can be applied as effective stabilisers against the fading of fluoran dyes.     

新型单片机控制熔化极脉冲氩弧焊机

采用一种新型弧压反馈闭环控制方式，在每一个周期内都可以保证电弧电压的平均值相同，可以实现稳定可靠的弧长调节。控制系统完全由软件控制器实现，人机界面友好。根据一个脉冲过渡一个熔滴的原则选取脉冲参数，在大量工艺试验的基础上．对脉冲参数的匹配关系进行了优化。试验表明，该机一个脉冲过渡一个熔滴的稳定区间较宽，电弧自身调节能力强，焊缝成形美观，几乎没有飞溅。研制的单片机控制的IGBT逆变式熔化极脉冲氩弧焊机工作可靠，已经投入批量生产。     

金属矿山深热矿井空气温度的灰色预测

金属矿山深热矿井气温的预测计算是一个难题，本文探讨了应用灰色系统预测理论来解决这一难题的新途径，并通过实例验证了该方法的可行性和有效性。