低温吸附法脱除一氧化碳中甲烷的实验研究

在液氮温度下,采用吸附剂CNA X进行低温脱甲烷动态吸附实验,结果表明CNA X在液氮温度下可以将一氧化碳中0 1%左右的甲烷脱除到10×10-6。     

Municipal solid waste conversion to energy

In recent years it has been recognised by an increasing number of nations that there is considerable energy potential within MSW. As a result many countries have established R,D& D programmes to examine methods of exploiting this potential. The IEA's MSW Conversion Activity was set up in 1986 to provide an infrastructure for sharing information and co-ordinating work in this area internationally. This Activity was extended in 1989 and currently a total of 9 nations participate in it.

To cope with the wide scope of the area (encompassing both biological and thermal processing of MSW) the Activity was divided into three subgroups or Expert Working Groups (EWGs). Each of these dealt with a distinct area of expertise:

1. •Downstream effects of source separation and screening of MSW

2. •Sampling and analytical protocols

3. •Landfill gas

In addition to these groups a central secretariat based at Harwell (UK) has provided guidance, established and administered databases of contacts and produced a series of national reports.

This paper describes the achievements of the Activity and discusses work proposed for the future.     

溶剂对溶胶-凝胶法制备LaMnFe2Al9O19催化剂的影响

摘要 用溶胶凝胶法制备六铝酸盐催化剂LaMnFe2Al9O19，通过BET、XPS、XRD等技术，对催化剂的结构和性质进行了研究，主要考察了在制备过程中不同的醇做溶剂对催化剂结构及其甲烷催化燃烧活性的影响。结果表明：不同醇做溶剂所制备的催化剂LaMnFe2Al9O19 在1200℃焙烧后都可以形成完整的六铝酸盐晶型，且具有较高高温稳定性。同时对于催化剂的的催化性能也有较大的影响，用异丙醇做溶剂所得催化剂的催化活性最高，并保持了较大的比表面积。     

靖边气田含醇污水处理工艺优化

随着陕北靖边气田的不断开发，气井产水量逐年增加，在对气井加注甲醇过程中，气田含醇污水量增大、含醇浓度偏离设计值，同时气田污水具有很强的结垢、腐蚀倾向，影响了甲醇回收装置的稳定运行。为此,从优化含醇污水处理工艺的角度出发，通过采取对高产水井污水分排分储、预处理工艺及操作参数优化、甲醇回收装置参数优化运行试验等措施，减少了含醇污水产量，改善了预处理效果，提高了甲醇回收装置运行效率和产品甲醇质量，保证了目前的含醇污水处理能够满足气田发展的需要。     

甲烷氧化偶联中钙钛矿催化膜的研究进展

甲烷氧化偶联对充分利用天然气资源具有非常重要的意义 ,以钙钛矿催化膜为核心的催化技术最有希望实现这一过程的工业化。本文介绍了近几年来人们对钙钛矿催化膜的研究成果 ,指出了这一领域今后的发展重点。     

深孔松动爆破提高瓦斯抽放率的应用研究

本文探讨了深孔松动爆破孔和瓦斯抽放孔的布置参数及工艺等 ,并设计了实施方案。在潘一矿的应用试验表明 ,用深孔松动爆破技术来提高低透气性煤层的瓦斯抽放效果 ,是一条很好的途径。     

活性炭中甲烷水合物的生成动力学

在温度275．75－279．95K和压力5．6－9．6MPa的静置条件下，测定了14组甲烷水合物在活性炭中的生成动力学数据（压力－时间关系），分析了甲烷水合物在活性炭中生成的物理过程，结合边界层理论和结晶学原理，提出了单液膜传质控制机理的生成动力学模型，并求得了解析解,使用Levenberg-Marquardt方法拟合模型参数，模型预测值与实验值符合良好。     

Catalytic steam reforming of methane over La0.8Sr0.2CrO3 based Ru catalysts

La_0.8Sr_0.2CrO₃ based Ru catalysts were studied as potential new anodic materials for Solid Oxide Fuel Cells directly fed with methane and operating at intermediate temperature under water deficient conditions. Two kinds of materials very close in composition were obtained following two different preparation procedures. Catalyst samples were characterized by physicochemical methods (XRD, SEM, BET and Chemical Analysis) and studied in methane steam reforming under water deficient conditions. Carbon formation during catalytic testing was studied by temperature programmed oxidation (TPO). Both types of catalysts were found very active and resistant to carbon formation. The unusual oscillatory behavior of the catalytic activity observed for one type of catalyst was discussed.     

国产CN—31催化剂与ICI65—2催化剂工业应用的比较

国产轻油预转化催化剂与进口催化剂相比,具有性能相当、价格低廉、供应方便等优势。国产预转化催化剂需在较高的液空速、温度较低的条件下实现烃类转化反应,生成含甲烷60%以上的富气。采用国产催化剂能明显反映性能价格比。文章对两种催化剂进行了工业应用比较和分析。     

低阶煤煤层气富集模式初探

通过对美国粉河盆地以及我国铁法盆地煤层气富集规律的解剖,总结出影响低阶煤煤层气富集的关键因素是封堵,而构造、岩性和水动力是形成煤层气封堵的主要因素。同时提出了5种不同的煤层气富集模式,即背斜模式、构造—水动力模式、构造—岩性模式、岩性—水动力模式和岩性模式。