热法磷酸的发展趋势与研究方向

简述了工业制磷酸的生产方法和热法磷酸生产工艺的发展,分析了热法磷酸今后的发展方向,提出了热法磷酸燃烧塔结膜物的研究课题。     

微生物法处理含硫工业废气

指出了含硫工业废气传统处理方法的缺陷 ,介绍了微生物处理方法的优势所在 ;对微生物菌种的共同特征以及无机硫和有机硫脱除时菌种的选择依据进行了讨论 ,并对微生物法脱硫的机理进行了分析 ;评述了国内外生物滤池法、生物滴滤池法和生物吸收法等生物膜法脱硫的工艺及其工业化应用。指出了微生物法脱硫技术有待深入研究的问题、发展趋势和应用前景。     

Antimicrobial protection of cotton and cotton/polyester fabrics by radiation and thermal treatments. I. Effect of ZnO formulation on the mechanical and dyeing properties

Cotton and cotton/polyester fabrics were treated against microbial attack by applying a formulation based essentially on ZnO under high‐energy radiation and thermal curing. To achieve the homogeneity and the reactivity of the treating formulation, a binder (Impron MTP) and a dispersing agent (Setamol WS) were used with ZnO. The antimicrobial property of the fabrics was evaluated, in terms of mechanical properties, by a soil burial test. Moreover, the effect of antimicrobial finishing on the dyeing properties in terms of color strength was investigated. It was found that the best composition that affords the best antimicrobial protection to cotton fabrics contains 2% ZnO, 2% binder, and 1% dispersing agents. For the cotton/polyester blend, the best results were achieved at the same conditions except the ZnO was 1%. It was found that the treatment under the effect of electron‐beam irradiation is better than that of gamma irradiation and thermal curing. The results showed that when the finishing process was carried out before dyeing with a reactive dye, it affects the color strength rather than performing the finishing after the dyeing process. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1129–1137, 2003     

Potential of microbial growth control in water hydraulic systems by UV‐irradiation and filtration

Water hydraulic systems use water as a pressure medium and, thus, do not pose such adverse environmental impacts as oil hydraulics. Microbial deterioration of the pressure medium and biofouling of the surfaces restrict the applicability of the water‐based technology. The potential of microbial growth control by UV‐irradiation and filtration was studied in a pilot‐scale water hydraulic system. The UV‐irradiation (25 m Ws cm^?2) of the pressure medium reduced the total viable counts of bacteria by 1–2 log₁₀ cfu cm^?3, whereas the total microbial cell numbers and the numbers of surface‐attached microorganisms remained unaffected. Prefiltration (1.2 µm, absolute) of the pressure medium decreased the total microbial cell number in the water phase and retarded the attachment of bacteria. The filtration during the operation (2 µm, absolute) decreased the total numbers of microbial cells and the total viable counts in the pressure medium, and microbial attachment on the surfaces. Microbial attachment was not prevented by filtration. The microbial water quality obtained by pre‐ and on‐line filtration of the pressure medium was sufficient to ensure the long‐term operation of the water hydraulic system assuming that clean work practices are complied with in assembly and during the operation. © 2002 Society of Chemical Industry     

影响水库中酸碱度变化因素的研究

通过监测数据分析,辽阳市境内所属两座水库在2006年均出现了pH值大于8.50的现象,经过实验及现场调查,发现其主要原因是水库两岸的有机质及腐殖质的分化对水库中水质中酸碱度产生了影响。     

Integrating a membrane and a fluidized pellet reactor for removing hardness: effects of NOM and phosphate

A novel treatment process combining a membrane with outside-in flow configuration and a fluidized pellet rector for removing hardness was studied. The effects of influent water quality, e.g., concentrations of natural organic matter (NOM) and phosphate along with the hydrophobicity of NOM, on the hardness removal efficiency of the novel process were investigated. The hardness removal efficiency decreases with increasing NOM concentration. However, the NOM removal efficiency is independent of NOM concentration and is related to the hydrophobicity of NOM samples. Raw water containing phosphate has adverse impact on the hardness removal efficiency, which decreases from 85% for treating water containing no phosphate to only 38% and 14% for water containing 0.33 mg/L and 1.63 mg/L of phosphate, respectively.     

栀子色素的提取与精制

对栀子色素的提取和精制进行了研究，提出了栀了黄色素和栀子蓝色素的生产工艺条件和方法：采用50％甲醇水溶液作浸取剂，在常温下，浸取时间为24h,栀子黄色素收率较高，为11％－12％。     

Transformations of residual fertilizer P in a semi-arid tropical soil under eight-year peanut-wheat rotation

Long-term transformations of residual phosphorus (P) governs the availability of phosphorus to crops. Very limited information is available on the transformations of residual fertilizer P in semi-arid tropical soils under long-term crop rotations. Therefore, using sequential phosphorus fractionation procedure, we studied changes in labile and stable forms of inorganic and organic P in a semi-arid alluvial soil (Typic Ustisamments) after eight years of annual fertilizer P application either to one crop (alternate) or to both crops (cumulative) in a peanut (Arachis hypogaea) — wheat (Triticum aestivum) rotation.Total residual fertilizer P in soil (P recovered from P-fertilized minus control plots) ranged from 62 to 176 mg P kg^–1. In the alternate P treatments (P applied to peanut or wheat only), on an average of 3 rates of applied P (13, 26 and 39 kg P ha^–1), in surface (0–15 cm) and subsurface (15 to 30 cm) soil, respectively, residual fertilizer P consisted of 14.8 and 2.2% resin-P, 8.6 and 2.8% NaHCO₃-P, 6.3 and 0% microbial-P, 31.4 and 4.2% NaOH-P, 7.8 and 3.0% aggregate protected-P, 12.5 and 3.0% HCl-P, 3.4 and 0% H₂SO₄-P. The corresponding values for surface and subsurface soils of cumulative P treatments (P applied to both peanut and wheat) were: 12.8 and 1.6% resin-P, 6.9 and 2.3% NaHCO₃-P, 4.7 and 0% microbial-P, 32.5 and 4.2% NaOH-P, 5.6 and 2.0% aggregate protected-P, 14.8 and 3.8% HCl-P, 6.7 and 2.1% H₂SO₄-P. Considerable lower values for the 15–30 cm depth indicate only a very small movement of residual P to the subsoil.Significantly lower amount of fertilizer P (28% and 44%) found in labile (resin, NaHCO₃ and microbial P) and semi-labile (NaOH and sonicated NaOH P) fractions for the cumulative P treatment than alternate P treatment (35 and 46%, respectively) suggests that increased rates and frequency of applied P tend to enhance the conversion of residual P to stable forms which are less available to plants. About 12 to 19% of residual fertilizer P found as organic P in labile and semi-labile forms confirmed that organic P increased with long-term fertilizer management. In conclusion, the results of our study suggest that the alternate application of fertilizer P to a crop, as is shown for wheat, helps reduce the transformations of residual P to stable P forms.     

Modification of oxidizing activity of Thiobacillus ferroxidans by some particulate solids

Different particulate solids such as glass powder, various types of activated carbon and bentonite suspended in Thiobacillus ferrooxidans cultures produce very different effects on the oxidizing activity of the microorganism. The atmospheric oxygen uptake by Thiobacillus ferrooxidans in Warburg respirometer flasks containing 9K medium with ferrous sulfate as energy source and suspended bentonite is 2.8 times that in the absence of solids. The dissolution rate of pure pyrite in 250 cm³ shake flasks containing 9K medium and bentonite is considerably enhanced over that where the only solid phase is pyrite. Conversely, the oxidizing ability of the microorganism seems to be inhibited by all the activated carbons tested. The effect of ground glass seems to be related to its particle size distribution. Implications for the bioleaching of sulfide ores and coal pyrite are discussed in the light of current knowledge on the adsorption of Thiobacillus ferrooxidans cells on solid surfaces.     

Lipid hydrolysis and oxidation on the surface of milled rice

The changes in milled rice FFA content and composition and in conjugated diene (CD) content and bacterial, yeast, and mold counts were determined at 24, 37, and 50°C and 70% RH over 50 d. There was a rapid rate of FFA formation during the first few days of storage, which was optimal at 37°C, but that slowed after 2, 4, and 5 d at 37, 24, and 50°C, respectively. There was a second increase in FFA after about day 12 that increased with increasing temperature, indicating nonlipase hydrolysis. Linoleic and oleic acids were the main components of the total FFA produced on the surface of milled rice. The pattern of CD development followed that of FFA increase. Bacterial growth correlated with increased FFA levels after 12 d of storage, suggesting that bacterial lipase rather than bran lipase may be responsible for rice lipid hydrolysis