产氚聚变堆概念设计系统研究

提出了基于球环类型的先进氚生产堆概念设计,它是聚变能发展的中间应用。与传统托卡马克氚生产堆不同,设计中利用了球形环的先进等离子体物理性能和紧凑的结构特征,并尽量利用真空室内的空间安置氚生产包层以减少氚泄露而增加氚增殖率,达到年生产氚1000 g的目标,相应的堆利用因子为40％。在2D中子学计算的基础上提出了较为完整的初步概念设计。逐项进行了分析,同时对设计的风险、不确定性和后备方案也做了概括的解释。为下一步更详细、具体的概念设计提供了直接的依据和重要的参考价值。     

絮凝体的物理特性

从絮凝体的密度,空隙率、絮凝体的粒径分布,絮凝体的强度以及絮凝体的分形维数五个方面综述了絮凝体的物理特性及结构特性,分析了影响絮凝体物理特性的因素。     

相依随机序列滑动平均的若干极限定理

基于服从指数分布的独立随机变量序列,构造带参数的滑动似然比,给出任意随机序列的用不等式表示的强极限定理,即小偏差定理。所得结果推广了已有结论。     

液相法制备纳米钯粉的工艺研究

采用液相法,以Pd粉为原料,分别用HCHO,HCOOM,C2H4H2O作还原剂,把钯还原成纳米粉末。通过控制反应体系的pH值、浓度、温度及还原剂的种类和还原时间来控制粉末的粒径大小及其分布.实验结果表明:利用本法制备的Pd粉粒径在9 nm~20 nm,粒度分布均匀而且重现性好,适用于制造钯银导体浆料.     

放射性同位素XRF技术中一种与“特散比”法等效的新方法

在一定的条件下,待测元素特征X射线和康普顿散射强度比值,与待测元素特征X射线强度和带吸收滤片所测量的强度比值之间有着简单的双曲函数关系。利用这一函数关系,很容易在单道携带式放射性同位素X射线荧光分析仪上实现“特散比”法改善基体效应。用这种方法所得到的分析结果和用“特散比”法得到的分析结果,二者吻合很好,而且不需要增加任何设备,节省了测量时间和成本。已经测量了几种类型的锡矿样品和某些铜矿样品。     

Techniques for quickly changing fuel gas in continuous annealing furnaces

An increasing number of annealing furnaces have recently been using cheaper and cleaner natural gas(NG)instead of liquefied petroleum gas(LPG)as fuel gas.However,the fuel gas of the furnaces often needs to be changed when NG supply is not adequate or when LPG becomes cheaper.Usually,changing the fuel gas involves changing various equipment as well as control parameters for instruments and the control system and hence is time consuming.Therefore,it is important to develop aquick process for changing fuel gas.This study discusses the techniques for quickly changing fuel gas in an annealing furnace.These techniques deal with the design of the pipe, valve and burner,the selection of the flow meter and the flow control valve,the switch of the software and parameters for the control system,as well as the operation,commissioning and hot test of the furnace when the fuel gas is changed.Using these techniques,it is possible to change fuel gas in6 h.     

Effects of Technical Conditions on Structure, Morphology and Crystalline Size of Nanocrystalline Nd-Doped Ceria Powders

Nanocrystalline solid solution CeO2-Nd2O3 powders were prepared by low temperature combustion process.Special attention was paid to the influence of the glycine/metal ratio and calcination temperature on the powders phase structure, morphology and particle size.TG-DSC curves and XRD peaks of different glycine/metal ratio show that smaller particle size can be obtained with a slightly fuel-deficient ratio.XRD results indicate that the as-prepared powders are crystallized in a single fluorite structure.The crystalline size ranges from 9 to 24 nm, which increases with the increase of calcination temperature.The lower SEM images were characterized by the spongy and form-like microstructure of the powders.Organic agent may be gradually eliminated by high temperature calcination process.     

半不连续切屑流动速度的系统分析及切屑变形的度量

本文借助影片运动分析仪,对用高速摄影记录的钛合金切屑沿前刀面的流动规律进行了研究,并用系统分析法进行了描述,推导出能反映半不连续切屑不均匀变形过程的动态衡量参数,同时也导出了度量此种切屑塑性变形的准静态参数——等效切削比。     

利用均匀设计试验进行混凝土配合比优化

提出了混凝土配合比试验的均匀设计方法,采用逐步回归法对试验数据进行回归拟合,以经济成本为目标函数,利用目标规划的方法进行混凝土配合比优化．     

硫酸钾尾液冷冻回收高硫钾比矿物工艺研究

以硫酸钾尾液为原料,研究低温冷冻回收高硫钾比矿物合理的工艺技术路线,探寻适宜的贮存条件,为加工车间夏季高温生产硫酸钾提供优质高硫钾比原料.在低温下进行冷冻试验,根据冷冻结晶矿物产率及其干基组分确定适宜的冷冻温度为-15～5℃,冷冻制得的结晶矿物硫钾比均在3.0～5.1,符合夏季生产硫酸钾所需原料硫钾比>2.5的要求.高...