高浓度熟料溶出的工艺研究

优化烧结法生产 ,提高产量、节约能耗是氧化铝生产急需解决的问题之一。实现高浓度溶出可以提高精液浓度 ,减少湿法系统物料流量 ,达到提高产能、增加产量、降低成品成本的目的。本文通过对国内外高浓度熟料溶出发展情况和烧结法影响高浓度溶出的因素进行分析研究 ,提出了提高熟料A/S的必要性 ;指出了适合我国条件的熟料A/S大小和生料配方 ;分析了温度和αk 对溶出和分离的影响机理和规律 ;提出了适合高浓度溶出的溶出条件和浓度大小。对生产有一定的指导意义。     

Corrosion of metals and alloys in mixed gas environments at elevated temperatures

The attack of nickel, cobalt, iron, and alloys of these metals containing chromium and aluminum, by gases containing sulfur-oxygen, carbon-oxygen, and nitrogen-oxygen has been studied at temperatures of 600 and 900°C. The degradation of these metals and alloys was characterized by using standard analytical techniques with emphasis on optical metallography. Three types of accelerated degradation were identified for the attack of alloys by gases containing another oxidant in addition to oxygen. One type of degradation occurred because of the formation of reaction products composed of mixtures of phases involving both of the oxidants. Another type resulted from the reaction of second oxidant phases with oxygen. The third form of degradation involved the development of less protective phases due to thermodynamic instabilities. Thermodynamic stability diagrams are used to help account for the effects produced by different elements in the alloys.     

混粉电火花镜面加工技术及应用

利用自行研制的混粉电火花镜面加工装置，对混粉电火花镜面加工影响因素，加工表面性能等进行了深入研究，找出了粉末特性，工件材料，粉末浓度及放电参数等对混粉电火花镜面加工的影响规律，给出了合理的混粉电火花镜面加工工艺条件，以文中确定的加工工艺条件对铸造和压铸模具进行混粉电火花镜面加工，结果表明，该技术能提高模具制造质量，降低工人劳动强度，缩短模具制造周期。     

细菌纤维素合成过程中的影响因素

研究了接种量、pH值、培养液深度、培养液表面积和发酵时间等因素对形成细菌纤维素膜的产量、厚度及比表面积的影响。结果表明:接种量在7%、初始pH值在5～6范围内细菌纤维素的产量最大;厚度主要取决于发酵时间和初始pH值;培养液表面积对单位面积细菌纤维素产量有比较大的影响;膜的比表面积与发酵时间的长短无关。     

STUDY ON PERMEATION OF ACETONE/NITROGEN MIXED GAS THROUGH AL2O3 MICROPOROUS MEMBRANES: MOLECULAR DYNAMICS

In this work, by applying Materials Studio 2.2 software package, molecular dynamics (MD) was performed to investigate the dynamic processes of 1:4 acetone/nitrogen mixed gas permeating through different Al₂O₃ microporous membranes. Three systems were modeled by considering different box lengths, microporous sizes, and textures of Al₂O₃ membranes to compare different permeation behaviors. In each system, initial mixed gas contained 20 acetone molecules and 80 nitrogen molecules, and its density was set to 0.1 g/cm³. Analysis on the concentration profiles of nitrogen molecules (N2) and acetone molecules (Ace) in each system at different sampling times was implemented to discuss the permeation behaviors of smaller N2 and larger Ace. The results showed that adsorption and diffusion occurred synchronously but adsorption was dominant for acetone molecules and that the adsorption on the floor surface of the feed gas region more easily reached equilibrium (local equilibrium) than the diffusion and the adsorption on the ceiling of the initially vacuum region. Furthermore, for nitrogen, adsorption followed diffusion. Higher temperature is in favor of the enrichment of acetone on the floor surface of the feed gas region but against the adsorption of nitrogen. The adsorptive layer was found to be a double-layer with COMPASS force field and to be a monolayer with PCFF force field.     

悬浮床催化精馏合成支链烷基苯的模拟

Suspension catalytic distillation (SCD) has been developed recently as an innovative technology in catalytic distillation. In this paper, a brief introduction to SCD is given and an equilibrium stage (EQ) model is developed to simulate this new process for synthesis of linear alkylbenzene (LAB) from benzene and 1-dodecene.Since non-ideality of this reaction system is not strong, EQ model developed could be applied to it successfully.Simulation results agree well with experimental data, and indicate some characteristics of SCD process as an advanced technology for the production of LAB: 100% conversion of olefins, low temperature (90-100℃) and low benzene/olefin mole ratio.     

丙烯酰胺改性蜜胺甲醛树脂的絮凝性能研究

合成了丙烯酰胺改性三聚氰胺（蜜胺）甲醛树脂，研究了其絮凝性能，利用烧杯澄清试验法，考察了酸碱条件，絮凝剂投加量和静置时间对絮凝性能的影响。实验证明：酸性条件，絮凝剂投加量为50mg/L，静置时间为20min时改性树脂的絮凝效果最好。并且与不同絮凝剂进行了浊度去除效果比较。     

甲醛法测定铵盐含氮量

对甲醛法测定铵盐含氮量进行了研究，提出采用百里酚酞和酚酞混和指示剂进行测定。该法简单、快速、准确，能满足生产实际和样品检验需要。     

Surface Areas of Nitrated Hydrotalcites

Hydrotalcites in the nitrate form were prepared using microwave irradiation in the hydrotreatment step. The surface area (BET) of nitrated hydrotalcites was evaluated. Solids were characterized by atomic absorption, X-ray diffraction and BET analysis. Thermal pretreatment temperature determined the surface area of the hydrotalcites.     

110 dtex/36f抗菌POY纺丝工艺研究

讨论了干燥温度、纺丝温度、冷却成形条件等对纺丝的影响。指出预结晶温度为160℃,干燥温度为145℃时,干燥效果较好。螺杆各区温度比常规纺丝时低10℃,纺丝顺利。侧吹风速0.37m/s,风温25℃,风湿75%,丝条稳定;上油率达0.9%时,集束性较好。此抗菌纤维抑菌率达99.99%以上。