基于数字图像处理的生物柴油-柴油雾化粒度的测量

生物柴油与普通柴油任意比例互溶的混合物可以代替石化柴油供内燃机使用,为了使得这种混合物在内燃机应用中达到好的动力性和排放效果,就需要研究不同比例的生物柴油—柴油混合物的雾化效果。利用数字图像处理的方法对生物柴油-柴油混合物雾化图像进行处理,获得了单位面积内雾化粒度的数量和平均直径,处理速度快捷、准确,减少了传统人工方法分析的主观性和较高的失误率。     

尿素熔融喷浆造粒工艺在复混肥生产中的应用

介绍了在团粒法工艺的基础上,将尿素熔融成尿液进行喷浆造粒生产复混 肥过程中存在的问题,分析产生的原因并提出改进措施,对改造效果进行了总结。     

Misleading the Colorado potato beetle with an odor blend

Walking tracks of Colorado potato beetles,Leptinotarsa decemlineata Say, were recorded on a locomotion-compensator in response to wind, odors of host plantsSolanum tuberosum L. and nonhost plantsLycopersicon hirsutum f.glabratum C.H. Mull, and to mixtures of these plant species. Host-plant odor induced positive anemotactic responses in starved females, whereas odor of the nonhostL. hirsutum was neither repellent nor attractive. The attractiveness of host-plant odor, however, was neutralized in the odor blend of plant species. Masking the attractive host-plant odor will hinder the beetle's searching for host-plant patches, and this principle may be exploited in pest control by mixed cropping.The locomotion-compensator was constructed with financial support from the Foundation for Fundamental Biological Research (BION), which is subsidized by the Netherlands Organization for the Advancement of Pure Research (ZWO), grant 14-02-02. The first author was supported by a grant from the French Ministry of Industry and Research.     

批处理过程优化调度研究综述--1.MILP调度方法的描述框架

综述化工批处理过程调度建模研究及其实际应用。计划／调度在企业生产管理中起着承上启下的作用，合理的计划调度不但能提高企业的服务水平、降低存储费用，而且还能提高企业的生产能力、加深对过程机制及关键数据的理解。整数规划方法应用于批处理过程计划调度，具有较好的适用性和扩展性，解的性质良好，在批处理过程调度研究得到广泛的应用。     

Synthesis, characterization, and catalytic properties of polysiloxanes with pendant 4-(3-pyridinyl)butyl and 4-(1-oxypyridin-3-yl)butyl groups

New silane monomers with the pendant 4-(3-pyridine)butyl group have been synthesized by hydrosilation of 3-(3-butenyl)pyridine with Me _n Si(OEt)_3-n H (n=0, 1) using a platinum catalyst. Only -addition products were observed. The products were characterized by elemental analysis, infrared,¹H- and¹³C-NMR spectroscopy, and gas chromatography-mass spectrometry. Hydrolysis-polycondensation of the difunctional monomer with a basic catalyst, Me₄NOH, gave a mixture of cyclic oligomers, principally cyclic tetramer, and linear homopolymer. Under similar reaction conditions, the trifunctional monomer gave crosslinked material which was soluble in common organic solvents. The linear homopolymer and crosslinked polymer were trimethylsilyl end-blocked with hexamethyldisilazane. The cyclic and end-blocked polymers were characterized by elemental analysis and spectroscopic methods. Molecular weights of the polymers were obtained by end-group analysis using¹H-NMR spectral data, size exclusion chromatography, and direct insertion-probe mass spectrometry. The cyclic, linear, and crosslinked materials were N-oxidized withm-chloroperoxybenzoic acid and characterized by spectroscopic methods. The polymeric N-oxide derivatives were shown to be effective transacylation catalysts in the synthesis of mixed carboxylic acid anhydrides in immiscible solvents (H₂O/CH₂Cl₂) under phase-transfer conditions. The implications of the results on the mechanism of catalysis are discussed.     

Characterization and activity in dry reforming of methane on NiMg/Al and Ni/MgO catalysts

Dry reforming of methane has been investigated on two series of catalysts either prepared by co-precipitation: n(Ni_xMg_y)/Al, Ni_xMg_y and Ni_xAl_y or prepared by impregnation: Ni/MgO (mol% Ni = 5, 10). The catalysts, calcined at 600–900 °C, were characterized by different techniques: BET, H₂-TPR, TPO, XRD, IR, and TEM-EDX analysis. The surface BET (30–182 m² g⁻¹) decreased with increasing the temperature of calcination, after reduction and in the presence of Mg element. The XRD analysis showed, for n(Ni_xMg_y)/Al catalysts, the presence of NiAl₂O₄ and NiO–MgO solid solutions. The catalyst reducibility decreased with increasing the temperature of pretreatment. The n(Ni_xMg_y)/Al catalysts were active for dry reforming of methane with a good resistance to coke formation. The bimetallic catalyst Ni_0.05Mg_0.95 (calcined at 750 °C and tested at 800 °C) presents a poor activity. In contrast, the 5% Ni/MgO catalyst, having the same composition but prepared by impregnation, presents a high activity for the same calcination and reaction conditions. For all the catalysts the activity decreased with increasing the temperature of calcination and a previous H₂-reduction of the catalyst improves the performances. The TPO profiles and TEM-EDX analysis showed mainly four types of coke: CH_x species, surface carbon, nickel carbide and carbon nanotubes.     

Low-temperature catalytic combustion of methane over MnO x –CeO2 mixed oxide catalysts: Effect of preparation method

The effect of preparation method on MnO _x –CeO₂ mixed oxide catalysts for methane combustion at low temperature was investigated by means of BET, XRD, XPS, H₂-TPR techniques and methane oxidation reaction. The catalysts were prepared by the conventional coprecipitation, plasma and modified coprecipitation methods, respectively. It was found that the catalyst prepared by modified coprecipitation was the most active, over which methane conversion reached 90% at a temperature as low as 390 °C. The XRD results showed the preparation methods had no effect on the solid solution structure of MnO _x –CeO₂ catalysts. More Mn⁴⁺ and richer lattice oxygen were found on the surface of the modified coprecipitation prepared catalyst with the help of XPS analysis, and its reduction and BET surface area were remarkably promoted. These factors could be responsible for its higher activity for methane combustion at low temperature.     

混凝土小型空心砌块专用混合砂浆的配制

针对混凝土小型空心砌块的特点,配制出专用混合砂浆.该砂浆未添加外加剂,便于建筑施工.实验结果表明该混合砂浆和易性能良好.该配合比可以作为基准配合比供其它工程借鉴、使用.     

阴极材料Ln-Sr(orCa)-Cu-O的制备及电性能

为了降低原料成本和适于工业化生产,以混合稀土取代氧化镧经硝酸溶解后,共沉淀法分别制备了Sr、Ca掺杂阴极材料Ln-Sr(or Ca)-Cu-O(Ln为混合稀土)的前驱体,在优化条件800℃下煅烧3.5 h形成了粉体,XRD证实形成的物相为CeO2立方萤石相与钙钛矿相。当2θ在20°~30°变化时,Sr2+掺杂使Ln0.5Sr0.5CuO3-δ形成的钙钛矿结构衍射峰相对完整;当2θ在30°~45°变化时,Ca2+掺杂却使Ln0.5Ca0.5CuO3-δ钙钛矿结构衍射峰发生扭曲;而2θ在50°~60°时,Ln0.5Ca0.5CuO3-δ和Ln0.5Sr0.5CuO3-δ衍射峰发生了不同程度的偏移和裂变。直流四探针法对合成产物烧结样品的电导率测量结果表明,在相同条件下,Ln0.5Sr0.5CuO3-δ电导率大于Ln0.5Ca0.5CuO3-δ电导率,在420℃时电导率达到最大值,分别为574和559 S/cm。在中温固体氧化物燃料电池工作温度500~800℃,阴极材料电导率超过500 S/cm,满足电池阴极材料电性能的要求。     

混合交通下右转机动车信号配时方法

为了减少右转机动车与直行自行车之间的干扰,提高交叉口的运行效率,本文分析了两相位信号控制交叉口右转机动车与自行车之间的冲突规律以及自行车交通流的行驶特性,确定设置右转机动车信号的直行自行车流量临界值.以减少冲突和提高交叉口运行效率为目标,确定右转机动车相位绿灯起亮时刻和绿灯时长,并建立了相应的参数标定模型.以实际调查数据为基础,应用VISSIM模拟软件进行模拟验证,结果表明,设置右转机动车信号后,右转机动车延误和机非冲突明显减少.